DumboRC DDF-350 Basic four-wheel steering setup 

Yo, super, glad it helped :)

Just be aware, for quick 4ws toggle you can use my modded firmware. Otherwise 4ws will be under couple of menus deep.

Hi! Write a comment if you need help. I did the mod for myself, because I wanted 4ws, so I knew how and what to set up. I know it could be hard to do initially.

@@lynxeduard Do you mind if we provide this firmware for people who have this need to upgrade their remote control? This feature is very useful, but we have no plans to upgrade it in the near future. So this might be one of the best temporary method.

@@easthobby Absolutely! Go ahead, I am very happy that this is useful to people.

Yoooooo, just realised, bratan F., is this you? (I won't spill your name here, we are all "celebrities" here). Yooooo, so cool you noticed and not angry! Write me here, write me to github, or e-mail. I can more than work with you, I can explain how I did it if you ever need it :) Remote is very cool, 4ws was only thing I mised. Just remember, I changed some translations a bit. Nothing bad mouthed, just removed some scrolling in EN and DE, especially my German bratans and bratanesses were hit by scroll of doom.

Hope this worked. Ask here in comments if you need more help. And don't forget to make values lower so wheels do not push against other parts. Play around with those hundreds. Also, from personal experience, take photos of good settings.

The problem here is l have already set my CH6 to my winch. So with my old version software V1.0.9 l set Mix1 and 2 to CH9 for rear steer and 10 for crab steer but it doesnt work at all because when l pressed the CH9 or 10 button it will just turn and stay there. without me turning the steer. After work today l will go back home and try again.

@@fauzijumari7617 Ok, this is solvable. 1. Identify the channel you plugged rear servo in. Except ch1 and ch2 they work the same. If you did not plug rear servo in, plug it into any free channel. 2. In ProgMix use that channel in S field. I use ch6, you use whatever channel you plugged rear servo in.

Ok noted bro. Let me try it later after work. Update u again. Thanks

So bro. If l dont download the firmware, l wont have the Prog.Mix Page in my Transmitter Settings set up page?

@@stevenpaulson4739 You need to flash my modded firmware. I have a video on my channel and links to Github.