2024 Dynamic shark REMD01 troubleshooting 352-999-4477  

I called Frank and he was responsive with sound troubleshooting advice. I would recommend his expertise to anyone having electric wheelchair issues. Thanks again Frank - Doug Quinn

Thankyou!!!! It is so vulnerable and frightening to lose your mobility, specially ahead of special events. You’ve really made a difference to peoples lives! Thank you so much!

This video helped me repair my electric chair, thank you

A very big thankyou for the lockout tip, my Mum's chair has been out of action for weeks and I got it going in a few seconds😊😊

MUCHAS GRACIAS 🎉

Thanks for posting. I really appreciate your material.

Thank you so much for this

Saved me 300 bucks!!

thankyouu so muchh

So I have a problem with the same joystick: it works completely fine but it does not turn off no matter how I push the on/off button it just does not work… Do have an idea what may be a solution to my problem?

Muchas gracias por su ayuda le deseo muchas bendiciones

I need help my jazzy 614 us a s flashing red n the wrench has flashed too

I need help my jazzy 614 us a s flashing red n the wrench has flashed too please help I need to get around n I’m stuck

What is brake mode? My wrench flashes 5 times.

Good afternoon, my chair is a Dalton and the wrench flashes 8 times and I already checked the current and if the voltages are reaching what could be the fault?

Thanx, astro...

Hello sir , my joystick model is Shark DK-REMD21 and my wrench flashes 9 times , how could u help me ?

I have a question. I fully charge my batteries (5 months old) and it just started messing up. I turn it on and it reads Full. I can literally go to the next room and Turn it off and than back on, and I now how Red Bars. Off again and wait just a few seconds and back on and have either gained Bars or now have flashing Single Red Bar. Off again and in a few mins I gain up into the Yellow lights. I have NO ERROR CODES. When I plug in the charger, I get the Flashing Green in about 5 minutes. Someone told me it is probably a Dead Cell in the batteries. WHAT DO YOU THINK? I can't afford to pay someone to come out and repair it. I haven't tried to run it totally out of power. I don't want to get stuck somewhere. Can you please help me?

Good morning, on my joystick the LEDs indicating the speed do not light up. if I press the buttons to increase or decrease it there is a difference but in any case the wheelchair is too slow. the batteries are new and all other functions have no problems and it does not report any error codes. can you help me please?Thank you.

please Can I buy a new or used one and how much does it cost?

EL MANDO QUE ESTA DANDO EN SU EXPLICACION QUE REFERENCIA ES OSERA EL YOYSTICK

Do you have any kits for a Quantum edge hd6 chair to make it faster,,,,.

3 wrench flashes on invacare pronto m51 what's the cause?

Hello, so i have a problem. I have this Joystick and the off button isnt working. It turns on but doesnt turn off. so i thought i just connect a switch to the joystick to turn it off and i did. It works fine but the Joystick shows Error code 9 i mean it works and drives as usual but im worried that this error code will have consequences as turning into this slower limp mode (according to the manual) So my question is: Is there a way to turn this error off or what would you suggest as an option to fix my problem?

DESDE COLOMBIA

How to solve the break fault please help me

9 times wrench is flashing

Mine is working correctly but i cannot turn the controller off. Any ideas?

When my husband turns on his chair three lights come on and then the controller turns off. No flashing lights. Just three green lights.

You're very I just too much jibber-jabber you need to shorten and keep it factual without all the commentary

mICHAEL

نور

Great video you are very helpful I am in longtime chair user I in fact have 10 different chairs how much do you charge for consultation I have some questions about replacing the joystick and control module on a invacare SP2 HD I would like to go with a mark 6 joystick and the compatible control box I might add that the chair is currently in Bogota Colombia and I want to be able to take the parts back with me on my next visit and install them part of this reason is I really need to be able to add the gyro and to be able to have the sd card for programming which I do on one of the chairs that I have at home in Alaska

What if my amber wrench flashes 9 flashes. & Says about lol