Dyson HD01 Hair Dryer Disassembly

Подписаться 27 тыс.

Просмотров 58 тыс.

50% 1

In this video we take time to show a lot of the detailed disassembly of the Dyson HD01 Hair Dryer. This video is recorded with better resolution than previous repair videos and will be my go to for disassembly. I will also upload a Reassembly video after the Dyson HD01 Hair Dryer Repair #3 video. I will also have a video looking inside of the filter on the Dyson cord called "What's inside of the Dyson Mystery Box?" and I will also take time to look at the GFCI as well in that video. Hope you find these videos helpful or at least interesting. Thanks for watching!
Kaiweets Coupon code
TTS15
Affiliate Link to Kaiweets KM601 DMM with Color LCD:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets HT118A Digital LCD DMM:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets HT208D AC/DC Clamp Meter:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets S20 130 N 1 (manual) Precision Screwdriver set:
kaiweets.com/products/kaiweet...
Affiliate Link to Kaiweets ES20 137 N 1 (battery) Cordless precision screwdriver set:
kaiweets.com/products/kaiweet...
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
northridgefix.com/product/mec...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF.Short Voltage Injection tool if needed:
northridgefix.com/product/pow...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hep...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att...
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/gri...
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
TOMLOV DM201M with built in DMM if needed: amzn.to/3mnLXZz
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
Atlas DCA55 if needed: amzn.to/2RhrcuP
MESR-100 if needed: amzn.to/2Rkcfbd
150W Load Tester if needed: amzn.to/30i8sn8
M12 Cordless Soldering Iron if needed: amzn.to/35XiFCp

Наука

Опубликовано:

8 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@fredho1151 Год назад

Great video. Easy to understand and thorough. Fixed my wife’s Dyson hair dryer that wasn’t working and showing three blinking leds. Disassembled the handle and found the motor was locked up due to some hair strands. Thank you!

@Sc0oby26th Год назад

Thanks, you helped me fix my wife's hair dryer as the silver filter had a thin layer of dust causing it to stop due to over-heating.👍

@daleport1055 5 месяцев назад

Superbly videoed, well explained and patiently narrated. Many thanks for taking so much trouble to produce this which was really helpful

@Mezuisu 8 месяцев назад

Just wanted to thank you for this video. Seeing that it was absolutely a repairable device I snagged myself one on eBay for nice and cheap. Replaced the JST connector on the motor, and now I have myself a reasonably priced hair dryer. Much appreciated.

@ThriftyToolShed 8 месяцев назад

Awesome!

@rickydeldo8596 Год назад

Thank you sir for the very good explanation.

@KlausPlaten-cu3wd Год назад

Thank you very, very much. It has lucked. My Dyson works now again. Great Video. Greetings from Germany 😊

@papa_gowon 10 месяцев назад

I'm another happy viewer now with a working hair dryer. Thanks!

@ThriftyToolShed 10 месяцев назад

Awesome! Excellent work and thanks for your comment!

@jrago6228 7 месяцев назад

An excellent video done by obviously someone very proficient with electronics

@ronbates9677 3 месяца назад

I'd like to add my thanks for the excellent series of videos on the Dyson hairdryer. I'm a fairly advanced DIY kind of guy, but I don't think I would have tackled the Dyson hairdryer without your videos, and if I did I'd have broken a lot of parts trying to figure out how it is assembled. My daughters quit because of a thermal fuse failure so I replaced it. Seems to be common for the one on the left to fail. A couple of months later, it failed again. That causes me to think that whatever is supposed to control the heat isn't functioning properly. I checked the thermistor and it seems to be functioning - resistance changes when heat is applied. I'm wondering if the bimetal gismo is supposed to open temporarily when the unit gets overheated, and if so, if that might not be working properly? One recommendation I have for getting the back cover off the top assembly (housing for the heating element) is to make a couple of 1/8" spacers (metal strap works well) with a crescent shaped cutout matching the curvature of the housing. Pry the cover up carefully and wedge them in between the cover and the housing. Then push one around to the other side, leaving the first one in place. That works well for me.

@ThriftyToolShed 3 месяца назад

It could be something going on with the thermal cut out strip for sure. I would think it would normally activate before the thermal fuse would open. After all the thermal fuse should be the last resort. I feel like one reason these fail maybe contributed to how the handle is held sometimes. If this is on high and running really hot and somehow the intake filter gets covered by hand or maybe even long hair in some cases it could cause the air flow to decrease so fast that it causes the fuses to open especially if tilted on its side with even more heat rising quickly and it's not held straight up. Another cause could be the dryer is bumped or dropped at some level while still really hot and that may cause the fuse to open. Just some possible causes since I see many viewers comment on this being a common issue it does seem. They really do run hot and it's tight temperature control, but the thermal fuse has to be running really close to it's rating on high possibly.

@henrikcarlsen1881 7 месяцев назад

Great to see how to take it apart, a gold mine of info. Trying to fix this particular model and I'm pretty sure the thermal fuse is the culprit.

@ThriftyToolShed 7 месяцев назад

Glad you found it helpful. I have a video called Dyson HD01 repair #3 and it was the thermal fuse on that one I believe.

@henrikcarlsen1881 2 месяца назад

@@ThriftyToolShed Ended up with yet another Dyson and ... I didn't even check if it tried to work, went for the fuses directly! They turned out fine so now I'm putting it together again to see what happens when I power it on. Stupid me. It was very dirty and the filter was absolutely clogged. Everything needed a good cleaning so - if it works - it wasn't all in vain.

@henrikcarlsen1881 Месяц назад

Apparently, it just needed a good clean. Job done and +3 thermos fuses in stock (one to wreck).

@gabriolinari 11 месяцев назад

I have the dreaded 3 red lights / overhating flashing when set to power level 3 and heat level 3 (level 3 + 3 only).... i tried to do some light cleaning and disassembling the base of the base + filter but still doing it. I think i'll have it serviced. been running every day for 2 years, drying the dog, family, etc

@ThriftyToolShed 11 месяцев назад

Good that you checked the filters. That screen has to be really clean sometimes to run on high without issues. It does get hair into the motor/blower sometimes also and causes issues!

@YunxiaLiu 3 месяца назад

At 3:42, my Dyson has T4 screws instead of T5. Not sure if Dyson changed design. Mine is a 2017 model.

@ThriftyToolShed 3 месяца назад

Thanks for sharing!

@riseandrun1 7 месяцев назад

Thanks for the video, not feeling too confident I can fix my daughters hair dryer. $300.00. Was told it was a bad motor. Repair shop said not fixable. As a hair stylist she has used it daily for 3 years. I think she got her moneys worth, no?

@giofurla 6 месяцев назад

A new motor costs only about 50 dollars, if you already have some experience with electronics you could try repairing it

@grimmers3440 Год назад

Great video, thanks. Also that tool set looks nice, do you have a link to it?

@ThriftyToolShed Год назад

I have the link in the video description to the Kaiweets tools. I will post the links to both screwdriver sets below. You can also use this 15% off coupon code. 15% OFF CODE: TTS15 Available sitewide at Kaiweets.com Link: kaiweets.com/products/kaiweets-es20-screwdriver-set Affiliate Link to Kaiweets S20 130 N 1 (manual) Precision Screwdriver set: kaiweets.com/products/kaiweets-s20-screwdriver-set?sca_ref=1714116.pmJeG8SEEq

@grimmers3440 Год назад

@@ThriftyToolShed I didn't expand the description, doh! Thanks, that's very thorough

@ThriftyToolShed Год назад

Thanks for your kind comment!

@longttang 10 месяцев назад

Hi , may I know if I can easily take off the colorful cover and change to a different color without having to dissemble everything? Thanks

@ThriftyToolShed 10 месяцев назад

The back cover is kinda easy to snap off and on, but It can be hard to get the catches to release without marring up the outer rim of the Dryer housing. Use care while prying the lip off. No other disassembly is required.

@user-rd3ss4hc9z 7 дней назад

Thanks! 👍🏻👏🏻👏🏻👏🏻

@user-cq8sk9tv6x 6 месяцев назад

Do you have experience with Dyson airwrap hs05 not blowing hot air? I was going to try and replace the cord but can’t find one

@ThriftyToolShed 6 месяцев назад

I have not on those at all. Sorry.

@coderedv 10 месяцев назад

Can I mod a 110v to a 220v by replacing the motor and circuit board only? Or do I need to replace the heating element as well please sir

@ThriftyToolShed 10 месяцев назад

I have not worked on a 220V to say for certain. I would think the element is also different for the 220V model.

@coderedv 10 месяцев назад

@@ThriftyToolShed thank you very much for your reply

@gamemaster1ize 5 месяцев назад

I’ve taken mine apart and replaced the thermal fuse as it had gone but now got 3 flashing red leds. Previously it did nothing at all so it’s progress but it still won’t turn on and still flashes red. I can turn motor by hand and it feels almost springy? Unsure if that’s how they’re meant to be. Any advice appreciated

@ThriftyToolShed 5 месяцев назад

The motor has very strong magnetic poles and you can feel the heavy drag of the magnetic field while trying to rotate. Likes it's fighting you to turn it.(Like It coggs) That being said, all I can think to check is making sure the Thermistor is plugged in correctly. It seems like a temperature issue. I think I shared more details of the thermistor temp. sensor on the HD01 repair #3 video. Best of luck to ya!

@lauramills2627 3 месяца назад

I just bought the Dyson super sonic yesterday. When I got home. I plugged it up to make sure it worked but when I turned it off it started smoking for a few seconds. Will this go away? Or should I return it?

@ThriftyToolShed 3 месяца назад

In my opinion it depends on how much smoke honestly. If a little bit from possible oil on the elements burns off and goes away then it should be fine. If it was a fair amount of smoke and it does not go away I would absolutely return it. They cost too much to gamble with for sure. I can't say for sure since I have never seen if one does that brand new. Anyone else on here have experience with a brand new one doing that?

@jrago6228 7 месяцев назад

Do you have a repair video for this dryer turning on 1 sec then shutting off with 3 white led lights flashing...

@ThriftyToolShed 7 месяцев назад

I don't have one for that, but that may point towards the air flow. So either an issue with the motor not turning or air flow restriction etc.

@CharlieAmbrosia 10 месяцев назад

Thank you for the video. How much would you charge me to fix mine? I could mail it to you. I bought it in 2018, it just stopped working today

@ThriftyToolShed 10 месяцев назад

I wish I had time, I do get asked this often. I do not have a repair service at this time. I work full time+ in an Industrial job and try to have time to edit videos to post. I try to help by posting what I have found with a repair as we learn together. I don't have a lot of time left. I hope you can find someone you know that likes to tinker and hopefully after watching the video can help you out. I wish you the best of luck with yours.

@GeekITLabs 6 месяцев назад

Do you take in Repairs? I’ve taken apart but that’s the farthest I can go. It does get power. But after that it’s beyond me. 😅

@ThriftyToolShed 6 месяцев назад

@katiriam6304 2 месяца назад

Is there anyway I can send my Dyson to you? My hairdryer suddenly turns off and it’s not heating either any help is greatly appreciated.

@ThriftyToolShed 2 месяца назад

@user-li6he2nr6w 3 месяца назад

Do you do repairs if I mailed you the hairdryer?

@ThriftyToolShed 3 месяца назад

@YunxiaLiu 3 месяца назад

At about 9:40, there is a retaining ring on the back of the front cover. I assume this dryer has been disassembled and reassembled already. You probably left out the retaining ring when you reassembled it.

@ThriftyToolShed 3 месяца назад

I thought that was mentioned in one of the repair videos if not this one also. That retaining ring is in-between the halves. This dryer has broken tabs from a previous repair attempt or maybe even a drop? So yeah, it easily popped off as you can see the tabs are broken.

@YunxiaLiu 3 месяца назад

@@ThriftyToolShed Yes, I was jiggling mine and it doesn't come off like yours. I was wondering what was wrong,

@ThriftyToolShed 3 месяца назад

@@YunxiaLiu If I did not mention much about it in the video, it must have been repair #2 video? I use curved needle nose to remove it and reinstall it.

@YunxiaLiu 3 месяца назад

@@ThriftyToolShed I didn't watch #2, I went straight to #3. I wasn't difficult to get it off, I didn't even use tool. But I think it worth mentioning here.

@andyepst Месяц назад

Excellet

@andyepst Месяц назад

I followed along your video having to pause several times and even go back a little. It got to the point where the project became too ambitious for me. I am so impressed with your knowledge of this item and I’m sure it goes well beyond the Dyson. Are you self taught? I’d like to send you what I have and pay you to fix it.

@ThriftyToolShed Месяц назад

I am an industrial electrical guy with a background in basic electronics. Electronics is a passion that I have strived to learn more about and most of that is self taught and I desire to share what I can. I wish I had time to repair for others, I do get asked this often. I do not have a repair service at this time. I work full time+ in an Industrial job and try to have time to edit videos to post. I try to help by posting what I have found with a repair as we learn together. I don't have a lot of time left. I hope you can find someone you know that likes to tinker and hopefully after watching the video can help you out. I wish you the best of luck with yours. Thanks for your kind comment!