E Bike Waterproofing Tips - How to protect E bike wiring and components from moisture

High Voltage DIY Electric Bikes and Vehicles

Подписаться 10 тыс.

Просмотров 4,9 тыс.

50% 1

This video has some e bike waterproofing tips and tricks you can use to protect your wiring connections and components from moisture ingress and damage. This video is aimed at DIY builders mainly but there are some tips particularly with battery connections that all ebike riders can benefit from. There is some focus on our upgrade kits but there are important things to consider here with any DIY build.
Timestamps
0:00 - Intro and layers concept
0:26 - Keep off Bulk Water
1:02 - Using Drip Edges
1:49 - Connectors
3:14 - BBSHD motor wiring and cover
5:34 - ASI BAC855 and mount
If you want to get involved in the discussion you are welcome to do this via the Discord or the comments here. highvoltagekits.com/discord
Our Upgrade kit for the BBSHD can be found here highvoltagekits.com/hv-shop/p...
Gaskets for the BBSHD motor can be found here highvoltagekits.com/hv-shop/p...
Huge thanks to LUX / @lux-ambientmusic for allowing me to use their amazing sounds for this video. Well worth checking out.

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@ericm8811 7 месяцев назад

Hey high Voltage diy electric bikes and vehicles! I live in Port Coquitlam just east of Vancouver British Columbia Canada and I did many of the wonderful waterproof tips you covered. I also put silicone in the heat shrink before I shrank it to seal the gap left between the two wires so the shrinking squeezes it out! I used dual wall adhesive heat shrink after I mate two plugs together to seal the mating line! Hope those added tips help other riders in soggy climates similar to mine! Happy new year! Ride ride ride!

@HighVoltageKits 7 месяцев назад

Those are some great tips there Eric. I will have to do the heat shrink one. Thanks. Happy New Year.

@kevwalton272 7 месяцев назад

great tip never thought of this one!

@piotrukasz3582 2 месяца назад

You can also use heat shrink with glue to insulate the wire plugs. These are usually 3:1 and 4:1 heat shrinks, so they adhere very nicely to wires and plugs, even when the plug is much larger in diameter. It's always easier to replace the plug if necessary, when you only need to cut the heat shrink, than to additionally remove the silicone from the plugs ;)

@HighVoltageKits 2 месяца назад

Thanks :)

@wolfiestechbites3773 7 месяцев назад

Whoooooah! Wait a tic. I’ve been an automotive technician for 30 years. And that Permatex dielectric tune up grease can be crammed into the INside of Any and All connectors. Directly into where the 2 pin high amp wires connect and any and all low amp multi-pin connectors. I’ve done probably about 200 tuneups and gone thru an insane amount of tune up grease. Spark plug 60,000 v plug wires, battery terminals, 40-120 pin computer plug ins where some of the pins are 1 v, 5v, 12v all on same connector. Cram full and waterproof, oxygen insulated and electrically isolated from neighboring pins. Electicity takes the path of least resistance. Fixed many perplexing and strange automotive electrical issues this way and saved clients thousands of diagnostic costs (treat on plug in at a time)

@HighVoltageKits 7 месяцев назад

That's fantastic. I bet I could learn a ton from you! I was introduced to it from my father in law who works on motorcycles a lot. I didn't know it was quite that flexible in use though. Good to know. One of those cheap things that saves thousands of dollars. Cheers

@ChrisBFerguson 6 месяцев назад

Excellent video. Very helpful.

@HighVoltageKits 6 месяцев назад

Thanks Chris

@Frombie_01 7 месяцев назад

Happy New Year! May all your plans for 2024 come to fruition and that you and your family enjoy good health.

@HighVoltageKits 7 месяцев назад

Cheers Frombie! Hope you have a great yeah as well mate. Cheers

@NoInfoFound 7 месяцев назад

Thanks for the hint about the dielectric grease in the xt90 connector. Don't forget the "strain relief" that snaps on the end; it is also not waterproof.

@HighVoltageKits 7 месяцев назад

Good point. Appreciated.

@charlievthetuna 4 месяца назад

You're such a great help!

@HighVoltageKits 3 месяца назад

Thanks Charlie

@markifi 7 месяцев назад

is comformal coating of any use here? quadcopter people tend to use that to make their circuit boards with the flight controller water resistant

@HighVoltageKits 7 месяцев назад

I have seen people coat controllers with that stuff on the connectors where they are exposed. It's not something I have used. I don't see why it wouldn't work.

@muramusan 7 месяцев назад

I put silicone thic grease on the outside of connectors been 4yrs, no corrosion or problems with my 52v bbs02b system 🎉 for one of my tips would be to silicone grease the oil seal ln the crank arms and bearing seals. seal the controller and motor gaskets with silicone rubber to make sure its solid. Happy new year, glad I found your Channel

@HighVoltageKits 7 месяцев назад

Appreciate the extra tips. That's awesome. Happy new year for you as well. Cheers

@JohnDrose-mr1fi 7 месяцев назад

i love your channel sir.

@HighVoltageKits 7 месяцев назад

Thanks John. Have a great new year

@BobLinton 28 дней назад

Good music! Sound almost like Blade Runner them.

@HighVoltageKits 28 дней назад

Cheers Bob. It’s based on that lux sound on RU-vid

@KarlHouston73 7 месяцев назад

Great Vid, thanks, and great ideas in the coments. in my opinion i wouldn't seal the wire exit hole on the controller case. In case you have a small weep, you need an escape for the water. You dont want to create a well.

@HighVoltageKits 7 месяцев назад

That's a good point you'd have to very confident with the rest of the job. Its not something I do myself and have not had any issues.

@johnarnebirkeland 7 месяцев назад

What I usually do is that I put heatshink tube on the XT90 connectors, and fill with dielectric grease/silicon before shrinking them completely. Filling with hotglue also work if you want something harder with more physical protection.

@HighVoltageKits 7 месяцев назад

You are the second suggesting the heat shrink trick. I like it! Cheers John

@gordkuhn 7 месяцев назад

Have you ever heard of this? CYC photon kit on a mountain bike, a Kona, Satori 29er. Kit has close to 900 km on it, overall fairly happy with it, except for false heat values in the beginning, they helped solve those. However, while riding up a hill, I experienced pulsation through the pedals. Everything still works. But now it is as though the torque system is compromised and it gives full torque with very little pedal pressure as though a spring is broken or something like that. I would be surprised if I’m the only one this has happened to.

@HighVoltageKits 7 месяцев назад

I have heard of the torque sensor failing yeah. Quick question though. When a bike is powered on torque sensors often calibrate themselves. Not 100% if CYCs do this. Do you have any pressure on the pedals when you power on the bike? Its a long shot. I have a feeling you will need to do a claim on it. I would get in touch with your dealer or CYC directly. You can try your luck on the Facebook group. They might have other ideas. You could perhaps try a firmware update or a reset to factory defaults. Sometimes they can get rid of these issues. Worth a go. Cheers

@carlyellison8498 7 месяцев назад

Bar mounted umbrella!

@HighVoltageKits 7 месяцев назад

I'm down!

@Andrea-B-65-UK 3 месяца назад

PVA glue is excellent for filling holes where wiring passes through the frame to completely seal the hole, it is extremely waterproof & easy to remove in one lump when needed

@HighVoltageKits 3 месяца назад

Love it!

@Andrea-B-65-UK 3 месяца назад

@@HighVoltageKits Just make sure it's not the water soluble PVA, as that stuff will make a proper gloopy mess all over the place PVA is also excellent at preventing rainwater ingress around batteries, switches etc as it's extremely rubbery & flexible A 500ml bottle of 'Wudglue' is about £/$6 ish & 500ml will waterproof over 100 bikes

@HighVoltageKits 3 месяца назад

@Andrea-B-65-UK Ahh yes! Not school stuff then!

@Andrea-B-65-UK 3 месяца назад

@@HighVoltageKits That'll probably work, but quality wood PVA is much better, giving any smooth surfaces a tooth will help it to stick, alternatively applying a thin coat of PVA an hour or two earlier before applying a thick sealing dose will also create a tooth for the PVA to stick to

@HighVoltageKits 3 месяца назад

@Andrea-B-65-UK appreciated

@chargeriderepeat7024 7 месяцев назад

Those downtube mounted front mudguards are superb, but be careful with the version that can be clipped on and off, I rode the the coast on a windy day and the last I saw of it was about a mile out to sea , still in the air😂

@HighVoltageKits 7 месяцев назад

I've had a set for a while but they are pretty beat up. Not had the front one pop off but the back one I have repaired several times now. Not perfect but they do the job. Sorry to hear yours was lost at see. I bet that was maddening. Cheers

@E-bikeguy 7 месяцев назад

Very nice video, that fat bike looks bad ass!!!

@HighVoltageKits 7 месяцев назад

Thanks man! It's not going to keep up with a Tommebike but it's a blast to ride. Cheers

@E-bikeguy 7 месяцев назад

@HighVoltageKits I have the jst connectors on the Tommebike I need to get them more water proof. Thanks again for the video!!!!

@josephdg1429 5 месяцев назад

Any recommendations on rear air shocks that's adjustable and super soft and springing , I like soft comfortable ride

@HighVoltageKits 5 месяцев назад

The DNM burner is pretty cheap and you can adjust it to be soft as well as change out the coil if needed.

@jamesbenot4475 7 месяцев назад

A hot glue gun is my trick. It always peels off easy and seals very well when used correctly. Grease and slime will creep out and about. Hot glue stops rather fast.

@HighVoltageKits 7 месяцев назад

Good tip. Appreciated.

@ortonscustoms2577 7 месяцев назад

Hi there what connector is on the phase leads of the fat bike

@HighVoltageKits 7 месяцев назад

The are called an MR30. Amass I think is the main brand. There are lots of clones tho.

@ortonscustoms2577 6 месяцев назад

Thank you, too low current rating for my application sadly

@dennisyoung4631 7 месяцев назад

Really wet area - in/around Portland in the damp season???

@HighVoltageKits 7 месяцев назад

I could totally have gone with Portland. Happy new year Dennis

@Andrea-B-65-UK 3 месяца назад

Using a small zip tie on either side of a connector will create a low drip point

@HighVoltageKits 3 месяца назад

100% Good tip. Just make sure not to punch the small wires

@Andrea-B-65-UK 3 месяца назад

@@HighVoltageKits The zip ties don't have to be fully tightened, just tight enough to create a low point to divert the maximum amount of water that runs down any wiring Zip ties just around the wire & not used to attach the wires to anything else on to bike

@CamiloSantana 7 месяцев назад

dielectric grease, ftw

@HighVoltageKits 7 месяцев назад

1000% cheers

@dennisyoung4631 7 месяцев назад

Oh? Got a tube of dielectric grease a while back, and used it with the replacement fuse-holder…

@taaviplaan 7 месяцев назад

I would never recommend to use regular silicone like in this video! Why arent't any manufacturers using it if it's such a miracle product?

@ataksnajpera 7 месяцев назад

Silicone works fine.

@HighVoltageKits 7 месяцев назад

They are. Manufacturers do all the time. You can see traces of the old silicone inside the motor where it was removed to service it. The silicone here was from a car shop. What is your concern here? It beats a battery short.

@game9370x 6 месяцев назад

hey cap! really thankful for this video as it gathers up all the spread up information that i've been hearing from you. the time has finally come and i'm gathering parts and tools to install the motor onto the bike. two questions: how long is a 9g tube of dielectric grease going to last? about the silicone, do you have any specific recommendation or general purpose is fine? i could get your same silicone if preferable. thanks a lot for your time, doing god's work!

@HighVoltageKits 6 месяцев назад

You don't really need much grease. Should last a while. In terms of silicone I used the stuff I got from an auto store. I would get it there. I used Lordco. Not sure if they have that with you.

@game9370x 6 месяцев назад

@@HighVoltageKitsthanks cap, cheers