e.max Glaze & Stain 

that restoration is stunning.

Thank you for such a great clinical emax finishing video!

I absolutely love these videos! They have helped me so much! Went from knowing 0 about designing to my dentist nick naming me "ceramic master" thank you for your videos!

Truly excellent clinical skills and devotion to the recreation of mother nature.....well done

Wonderful! Your passion really shows in your work. I'm just learning how to stain and glaze. Your videos are very helpful. Thank you.

Thank you so much doctor

Thank you James for very helpful videos :)

Wonderful job doctor! Ive been an EFDA for 25 years. Your videos are extremely helpful. Thank you. I'm just starting a new job because I relocated from South FL to Savannah GA. My office was not equipped with this and I was there 13 years. I had previously worked in an office that had it and loved it. But I'm a bit rusty lol. So I'm brushing up. I just came across your videos!!! Wow!!; so informative!! Excellent!!! Again thabk you!

Thank you for producing such educational videos. I am a CDT-ceramic specialist who has transitioned into the digital arena. I have a great appreciation for the attention to natural morphology that you achieve through your technique; especially in the high-paced production scenarios of today that tend to disregard aesthetics.

thank you for sharing

thanks for the nice video

Thank you so much , This video so cool to dentistry students ...

Thank.you. very helpful!!

Merci pour cette vidéo ! Je vais faire mon 1er maquillage mercredi prochain 🤞🤞🤞

Lindo seu trabalho muito bom mesmo quem dera os meus ficasse assim parabéns pelo amor no que vc faz

Lovely

Thank you for these videos! Can you tell me what the "A stain" corresponds to color-wise in the Ivoclar stains?

Can most labs add stain to a crown (s)? Is staining a normal procedure or is it so specialized in skill only some labs are capable? My dentist and lab is having a hard time matching my crowns (lower) to my existing upper crowns. We have tried twice thus far with the lab my dentist uses and they keep coming back way too bright vs my uppers. We can't seem to get it right although my temporaries match my current crowns much better, almost perfect. Along with my initial ques of can most labs stain a crown, do you have any suggestions on how one might get the color better matching besides using the color pallet dentist use? Your reply is much appreciated. Really frustrated as the cost to get them was not cheap at all and this far only happy with the shape and fit...color is driving me nuts

hello James :) i have a for you .. if we dont apply the infiltration technique after sintering ,staining technique is the same ? just glaze and put colour like how you did or there are some differences? if you could answer i would apprecite :) thank you

Good g

Very pretty tooth 👍

Can you explain about finishing in Empresa cad?

Hi Dr. Klim thank you for sharing such great information and video. Tell me please how do you holding this emax crown? Do you use some special paste for holding this unit ?

What tool did you use for polishing(Dremel)?

excellent work Doc!!!! I m from Argentina. Here it is not easy to get that meisinger Polish kit. could you give me any web information about any shop in the US where I could order that. Thank in Advance Ramiro

What is the name of the post you placed in the object fix?

Another great video. You are a true artisan! I recently (Jan '21) had an implant procedure and now am awaiting the finished bridge (Sept '21.) The bridge the dentist ordered came in but was not a good color match. It was obvious to the doc, assistant, and myself that the color was too white. It must match my other top front teeth! The owner of the practice said that he would send it back for color adjustment to have some grey added to it and it would be perfect. Is that even possible to alter the color of the finished product? I've already paid $8k for this work and it must be up to par.

Do you have Katana stain and glaze video? I researched the MiYo stain and glaze after watching your videos (they are just awesome), but turned out won’t work for Speedfire. Can you use the e-max characterization stain and glaze on Katana?

Hi! I have a question. When you choose the block color, do you aim for the main color of the restoration? Or do you keep it a bit whiter and then add some staining to match the final desired color? I found my restorations tend to be too dark… thanks in advanced!!! Great videos!

For anterior emax

Hello, thank you for uploading a perfect video, just one question, I see that when you do sintering in the program, it appears 14 minutes, how does it adjust in my oven, is it the same as yours, it appears 26 minutes, can it be adjusted? thank you

Hope you can answer my question. My crowns came back from the lab looking bulky , my dentist shaped them and now they look good , but they are lacking the high shine I saw when they came back from the lab at first. I’m guessing they are stripped from the glaze? Do they need to go back to the lab for glaze ? I’m wearing them now with temporary cement and I don’t like how they look. They look Matt, and only shiny when I lick them. Also one more question. If they have to go back , what color of glaze will be used just to give them shine ?

Great video! How much time are you allowing for a restoration like this from start ( anesthesia) to finish ( final cementation )?

Dr. Klim . I have been using the Katana Zr block a lot which is great but I noticed that the shade value is higher than proposed. I don't have an oven in the office to stain like you do. Should I request the lab to use a A3 block when in reality the patient's shade is A2. Thanks

At what temperature do I fire the crown. My furnace doesn't have preset temperature Kind regards Johan

That’s amazing! What stain and glaze do you use. I use MiYO from Jensen and how were you able to put stain when the milled tooth is not yet baked cause I was taught differently. I do it separately first bake before staining it then fire it again.

Did you try the stain and glaze kit from denslpy sirona ? And which you prefer polishing burs for e.max?

Thanks for your informative videos James. My firing times on P3 program are still 24 min 30 secs so I’m curious to know about your 14 minute program. Is this a new cycle that used not to be available but is now a recommended firing sequence for brushed on stain and glaze over e.Max crowns Many thanks again!

i mill the emax crowns and i always get bubbles on the buccal and lingual surfaces, any tips on how to make it so there aren’t any bubbles on any surface ?

I really liked the object fix flow but it turns out to be very expensive 1 syringe $ 50 is too much

Great vid….but isnt the long cycle required for brush glaze and short cycle for spray?

My 20 crowns been in the lab for 10 days now and still need sometime is it normal time?

1Thanks for the video. I have a question: how do you account for the thickness of the glaze and coloring so that the restoration in the final seating fits well (interproximally and occlusally)? Do you mill the designed crown with specific thickness? Thank you!

Hello!... is there the posibility for the emax crown to change color if the mix of glaze is not the proper one?... thanks!!

Hi i did a cerec crown and i put a glanze layer then i put it in the oven i think the glanze was very thin sothat the crown didnt come shiny. Can i put it another time in the oven with wright glanze viscosity. Should i pay attention of some procedures before i do that. Thanks very much for your videos

Wow I wish u did my teeth. Btw why do some places charge $1k for emax and other places charge nearly $3k for emax?

How long does it last? Can it be reapplied?

What diamond paste was used in this video?

What kind of brushes do you use?

what brand of stains do you use?

Do you do this staining while the patient is in office?