e-NV200 battery upgrade part 2: Fixing minor issues - CAN -Bridge relocation

Подписаться 5 тыс.

Просмотров 4,4 тыс.

50% 1

*Update March 22: Firmware issues with CAN bridge have now been fixed, I recommend fitting a CAN bridge for a seamless upgrade. Firmware for CAN bridge is now open-source :-) github.com/dal...
A few weeks ago I upgraded the battery pack in my Nissan e-Nv200 from 24kWh to 40kWh, see video: • Nissan e-NV200 24kWh t...
In this part 2 video, I fix an issue which was causing some rapid charging stations to display the incorrect SoC and stop charging prematurely.
Thanks for ‪@DalasEVRepair‬ for making a CAN bridge firmware update and for advising on how to fix this issue. Dala made this video documenting the changes he made to the CAN bridge firmware: • Confusing quickcharger...
4-core twisted pair cable I used in 6mm flexi trunking: uk.farnell.com/pro-power/pd1002/cable-scrn-7-0-203mm-2pair-per/dp/1387731?ost=1387731

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@thesmallrougeone 3 года назад

Useful to know if I ever pluck up courage to swap my 30kWh! When the time comes I'll probably pay the experts to do it, but nice to believe I could do it myself 🤔 Maybe the first step would be replacing the soldering iron and solder I've had since 1996 😂 (bought to install remote central locking on my Mk2 Ford Fiesta 😁)

@Whereswally606 Год назад

Thanks for this Glyn. My 40kwh upgrade is imminent in the next fortnight.

@AdrianMcDaid 8 месяцев назад

did you get it done, how did it go ?

@Whereswally606 8 месяцев назад

@@AdrianMcDaid yep the battery was swapped with help of Laimonas who sold me the battery and used the lift and pro help with the aircon at mitsiland in Denton. Had it a while now. On renewed firmware for the 2 port canbridge which has really decent low power consumption on the 12v now. Very easy to reflash. Overall a success. But my hx on the 40kwh pack is not brilliant and as a consequence rapid charging is relatively slow especially when we took the van to france. Had to turn around at paris versaille since the battery was making travel very slow with rapidgating. Didnt get to toulouse to see my friend but did manage to get home to manchester. Next mods are ccs and maybe and extender pack

@Whereswally606 Год назад

Just run my cam bridge wire through the firewall. Gonna save soldering till tomorrow running too close to picking the kids up. Want a full day aside in case i screw something up. Tip about the black trunking is a good one. Managed to have some off an old honda insight to protect my wires from those cheeky mice. Rained all day today so ive postponed the job. Did manage to wire up and test my diy v4 bms though for a potential leisure battery.

@Whereswally606 Год назад

Finished my 2 port install. This video helped massively. Just charging at the osprey rapid in Stockport. Local cheadle rapid was broken and made me panic a little. Anyway just waiting to see how long this is going to take.

@Whereswally606 3 года назад

I wonder whether muxsan and cleevely knew this already about the env200. They both convert these vans with emile's canbridge. This is all good stuff glynn. My muxsan leaf is still going well but would love to swap the 24kwh gen1 canary pack with a 40kwh. Fortunately we just bought a 2014 gx4hs outlander as a second car. With a phev box and a canbridge i am hoping to convert it to a mostly ev suv that can tow upto 1500kg legally. Great work as alway Glynn and Dala.

@EdTurner. 3 года назад

Extra brain work creating a most Satisfying outcome.

@JonathanPorterfield 3 года назад

Great video Glyn 👍

@PlanetCypher_ 3 года назад

I think doing a belt and braces approach is sensible here, do a leaf spy flash, then add a CAN bridge, reason being if the bridge fails or is damaged you can fall back to flashed operation untill the bridge is repaired, otherwise your stuck on reduced power etc with a P3102 code.

@GlynHudson 3 года назад

Exactly, this is what I've done. Although if the bridge is removed I need to add a connector to re-connect the EV CAN lines

@PlanetCypher_ 3 года назад

@@GlynHudson yes, a job at least you can do in the field to get you going again .👍

@B2C2007 Год назад

Glyn - from your experience (thanks for all of your time invested in these vids btw), is there any reason why we can't just swap the VCM from a 40kWh van into a 24 van? Will that do away with the need for a canbridge?

@GlynHudson Год назад

The unique battey ID would still need to be paid with the vcm, unless you found a vcm and 40kWh batrey from the same vehicle. You would also need to pair vehicle keys with the new vcm. This can only be done with Nissan tools. Swapping the vcm is a lot more work and cost than using a can bridge.

@B2C2007 Год назад

@@GlynHudson In fact, I have a complete written-off 40kWh van with VCM/ keys and leafspy for pairing. There is currently a delay for Dala's can bridges of a few weeks so I might just wait and see.

@GlynHudson Год назад

@@B2C2007 if you have a battery and vcm combo it may be worth a try, I think pairing the keys is quite straightforward with the right tool. Possibly pairing keys could be possible with the 'LeafHacker' android app. Let us know how you get on

@B2C2007 Год назад

@@GlynHudson I had this back from Dala: "I would advice against trying this, will with 99.9% certainty not work"

@GlynHudson Год назад

@@B2C2007 Dalla knows best!

@billyray323 3 года назад

Clever lad, well done 😉 How many true miles are you getting now mate, as opposed to the guess ometer ?

@GlynHudson 3 года назад

Getting 140 miles in summer and probably about 120 miles in winter with steady driving

@Powly709 Год назад

@Glyn Hudson HELP! ⚠️ Hello! Do you know any garage who can do battery cells replacement in France please?

@GlynHudson Год назад

Sorry I'm afraid I don't

@101belcore Год назад

Hi Glyn, Are you still reading this? Have a eNV200 battery upgrade question. Is skipping the can bridge and only using leaf spy battery error code remover leaves me with alternating range display with max range and some chargers not charging to full? Is the AC cooling working? Anything else ? I am trying to avoid splicing into the harness underneath. Thaaaanks. Peter

@GlynHudson Год назад

That is correct. However, compared with the effort of doing the battery swap fitting the CAN bridge is quite straightforward. It's just like fitting a car stereo. I would recommend fitting a CAN bridge to have a seamless upgrade. Especially the rapid charger compatibility, that's the mains issue. Also, the ability to sell the van with a professional polished upgrade in the future.

@101belcore Год назад

@@GlynHudson thx Glyn. But the AC battery cooling did work, didn't it? There was only a glitch in the early coding of the can bridge right? thanks for your answer, big fan of yours from Hungary peter

@GlynHudson Год назад

@@101belcore the battery cooling worked fine without the CAN bridge, but it didn't work with an early version of the CAN bridge firmware. This has now been fixed

@101belcore Год назад

Thaaanks

@coxnigel820 3 года назад

Nice job problem solved

@yudanny8238 2 года назад

I have 2014 leaf want to up upgrade to 40 kw battery,where can buy can bridge?

@GlynHudson 2 года назад

dalasevrepair.fi/can-bridges/

@PlanetCypher_ 3 года назад

Does the 69% roughly compare to a 24kwh pack @100% ? I think it does roughly work out 67ish % is 24ish kWh's ie a full 🔋

@GlynHudson 3 года назад

The 40kWh pack has 36kWh usable, my 24kWh pack at 80% Soh had 17kWh usable, therefore the new pack is just over 2x lager. So 50% of the new 40kWh pack equal to 100% of my old pack