e39 540i How To Pull The Transmission! (M5) 

Wow, really needed this video! Really appreciate your time and information on this BMW auto repair. Very informative, and it seriously will help me do this job myself, shortly. Thank you so much for putting this out, for us all to watch!

I wanna see Chris money rodknock try and remove the bitch clip just for entertainment

Good job. very informative. Just did clutch on my 540

I'm doing this now on my '99 540i/6. There are *TEN* E12s and two E10s. Thank you for showing it. I was going crazy looking for the other E12 at the top. Thanks for the video in general. I don't like that shifter clip. It helped to come in from the backside with a regular screwdriver to help lever it up.

Pulling a transmission: Grab one end and tug ...

Im still scratching my head why you have (M5) in brackets? i was waiting for another video for the M5 ?

Thanks a lot buddy I will start the process and make my life miserable 😂😂😂😂😂😂 but I have to do it I blow out my

3 month old vids getting recommended, can only be a good thing 👌

Don't follow this if you have an E39 M5 as this is not the E39 M5 Transmission.

Is this the E39 m5 or the E39 540. There is a big difference?

I have a 1999 bmw 528i and I’m trying to pull the trans in it it’s a inline 6 or do you have a video showing that car

Can i fit a Auto E39 540 transmission into a E39 M5

My plastic tabs were also in front of the heat shield like that.

Never tilt the unit that, it comes straight out

Transmission and clutch for m5

Not sure why Iĺl ever need this, but good job

IF you have to dumb it down this much for people.. like how to remove an exhaust... then they shouldn't be replacing the trans on their own lmao

Nice going . I have the auto but good info and no waffle :)

Is camera man drunk????

Yo DBO i have a 02 530i m54 5speed Msport, i have to replace the throwout bearing and the detent shift pin springs in the trans but my exhaust was straight piped with the muffler/resonator delete before i bought it and was wondering how come there's no o2 sensor to be found on the exhaust(Part1 video) at all like your 540? Is there a difference between the two besides the technical update and the dual exhaust/catalytic converters? And also how come we both have 02 but mine didnt come with the TU when i have a newer model?? Is that because ones I6 and the other v8? Please help a brotha out🙏 Bless UP!

What sockret do you use on the transmission bults the ones before it drops?

Hello i was wondering if these are the same bolts and tools used to take off a ZF 5 speed manual transmission e39?? I cant find any info anywhere.... please HELP!!

Im starting to get some slippage and will be looking at doing the work myself. Your videos are by far the best I’ve seen on RU-vid for this job ! Easy to follow thanks for the help … oh and wish me luck

Now tell us how to rebuild the 420G...

Fuck... so I can't do it myself. Thanks for the informational and very detailed video.

Uauu

What impact are you using the Milwaukee??

What does everything get torqued down to ?

Wow,thanks guys! Very informative. I haven't really worked on this era BMW before, and was struggling on my back with the car on jackstands last night. Decided to search for a how-to video before continuing, and this definitely gave me all the info I needed.

this is so fun. just watching

Does the Exhaust have to come off as well on the I-6 engined ones like the 520?

This help so much

so damn good

its very similar to a e30-e34-e36-e39-e46 and prolly more? XD its all the same :p can put a e39 box on a e46 and vice versa.