EASIEST WAY To Fill Gel Blaster Mag | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo

Подписаться 18 тыс.

Просмотров 561 тыс.

50% 1

Why You NEED this Gel Ball Dispenser | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo
▼ WHERE TO BUY -
▶ Get 10% off at GelBlaster's website when you use coupon code DANIEL50302 gelblaster.com/products/gelle...
▶ GELLET DEPOT on Amazon - amzn.to/3Udvhib
▶ GEL BLASTER SURGE (Get 10% off at GelBlaster's website when you use coupon code DANIEL50302 ) gelblaster.com/products/gel-b...
▶ NEWEST GEL BLASTER SURGE VERSION (Amazon) - (V3) amzn.to/3BtXUBx or (V2) amzn.to/3aMynZd
▶ GEL BLASTER SURGE XL (Amazon) - amzn.to/3F83WcE
▶ AMMO (Gellets) 5 pack (50,000 rounds) - amzn.to/3zFdzKz
▶ UNLOCX Official Website - myunlocx.com/?ref=Kx3hrpS9oqYqvK
▶ UNLOCX V1 Pistol Blaster (Blue, White, Orange): amzn.to/3BgcWuB
▶ UNLOCX V2 Pistol Blaster (Black, Yellow):
▶ Original UNLOCX 4 in 1 Gel Blaster (With stock and barrel extensions): amzn.to/3Bfgugr
▶ UNLOCX Ammo 22000 Rounds: amzn.to/3wZseBd
▶ UNLOCX Ammo 132000 Rounds: amzn.to/3Rmg8uj
▶ Ammo 5 pack (50,000 rounds - 3rd Party - Cheaper) - amzn.to/3l9L6sp
▶ Ammo Orange 10 pack (100,000 rounds - 3rd Party - Cheaper) - amzn.to/3BOu0pK
▶ Ammo Blue 10 pack (100,000 rounds - 3rd Party - Cheaper) - amzn.to/3aMyZxZ
▶ Revision Locust Goggles - amzn.to/3B25bae - www.bradleyssurplus.com/colle...
▶ Lipo Battery Bag 240x190x60mm Size - amzn.to/3NzCZju
▶ SentrySafe Fire and Water Resistant Bag for Documents, 5" x 11" x 15" - amzn.to/38X6BbX
▼ VISIT OUR WEBSITE
▶ Products we make: soulbuilt.us
▶ Engineering: www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: / soul.built
▶ Facebook: / soulbuilt.us
Why You NEED this Gel Ball Dispenser | Gel Blaster's GELLET DEPOT grows, stores & dishes out ammo
#gelblaster #surge #splatrball #gel #gellets
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY

Спорт

Опубликовано:

12 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 190

@engineerable Год назад

What's your favorite way to fill mags? ▶ WHERE TO BUY GELLET DEPOT - amzn.to/3Udvhib

@masonandterrance103 Год назад

❤❤❤❤

@briangreig9913 Год назад

Here's the secret. You have to physically tip the depot so it faces slightly up so you don't crush gels in it. And you also should shake it when you're draining the water.

@engineerable Год назад

Thanks for tip, I do tilt and shake for draining, and that works well.

@gavincleland9010 Год назад

I have one, and it's really cool that it can be used like a funnel on it's own. It makes reloading both the standard 400 round magazines and the 1200 round (modded, thanks!), srb400 mags. Especially nice because my first srb broke a gear or more in the gearbox, meaning I now have 2 standard mags and a drum mag to fill. Still waiting to hear on if brand name gel blaster gearbox assemblies (lightning etc) can be put in to fully replace the gearbox on the srb400.

@PlayNowWorkLater 9 месяцев назад

Cool Video! Really like the channel intro with the stop animation of the cassette tape. Clever!

@MrBobert1989 Год назад

I love my Depot. Thinking about ordering a couple more.

@TanSolo60 Год назад

absolute must have.

@Hikaru109Ichijyo Год назад

that's pretty handy. I use those squeeze water bottles with the pour spout (or the condiments squeeze bottle, just exacto knife the tip to size for gellets; also I prep orbz in a bucket and transfer them to the squeeze bottles) or scoop from bucket and car oil funnel (although some you may have to use wire cutters to clip the tip to size for orbeez)

@ThatOneGuy-xd9sw Год назад

RIP to the bug at 6:50 😂 *At the back of gel container

@thepeskyone Год назад

Bro got demolished 😭

@XTROutdoors Год назад

The ants said “I wanna watch too”

@taylorrichter1320 Год назад

I love mine way better then my old ones and I picked mine up at target along with my starfire xl

@jonathanprice3746 8 месяцев назад

I love your intro! 😮

@billted3323 Год назад

1. They shoulda put a vent on the lid 2. Make easy to open valve 3 Angled the bottom of the bucket or Valve so the balls want to fall out. 4 Make valve more narrow at the tip or flexible tube on tip 5 Make valve that dosen't crush some of the balls when turned off

@engineerable Год назад

All great ideas. I'm going to 3D print a flex tube that you need to pinch open to load gels. We'll see how that works.

@neonsurfer3217 Год назад

You cant except all of that for a such low price be happy.

@billted3323 Год назад

@@neonsurfer3217 You don't know how much it costs to make.

@RVDL 10 месяцев назад

@@engineerable Did you manage to find the time to create that flex tube yet? And is the 3d design available for purchase already?

@IAM_maddox Год назад

I need this I getting a gel blaster for Christmas

@daunplugtoaster6344 Год назад

heres a tip i do for mine, just tip the bucket back when you are done filling your mags to avoid smashing

@carsonguth7799 Год назад

6:40 - 6:50 that poor little bug got slammed 😭🤣

@engineerable Год назад

RIP 🐜

@mitchellhoward7427 9 месяцев назад

cool product. execution on that latch/drain leaves a lot to be desired.

@glowytheglowbug Год назад

very satisfying

@Staypositive_qoutes Год назад

How long to put them in

@thiswillbefunright2167 Год назад

thats realy cool

@cheesecake9336 Год назад

Dang those line on the orbes

@Ryno69ification Год назад

In Aus we all just use the black speed loader bottles for loading mags

@engineerable Год назад

Unfortunately, we don't have those here, unless we order them from Zhenduo.

@TanSolo60 Год назад

far out man!😃

@gothamsfinest7317 Год назад

I just used a ziploc bag to soak em a collapsible colander best way to strain, any bowl big enough to hold both the mag and your hand to scoop will suffice less money spent at the store

@gothamsfinest7317 Год назад

Anybody else try the old fashioned speed loading way airsofters do it?

@Obsnano Год назад

I wish i woulda thought about it first prolly gonna make millions

@gavincleland9010 Год назад

Serial commenting at this point, I have noticed that any of the brands of gel balls you can buy at normal retailers like walmart, in the US, are all prone to having pre busted orbeez in the pack.

@engineerable Год назад

Good to know. Hardened gel balls don't seem to have this issue.

@Rollypolly1064 Год назад

5:11 im calling the ant bobithy and the ant on the bottom at 5:19 is going to be named jeb

@jamaicansoul_js Год назад

6:50 R.I.P ant

@xxravenzxx6362 Год назад

Quick question can you replace the splat gun gearbox with a v3 metal airsoft gearbox?

@engineerable Год назад

In theory yes, however there are some modifications required and replacing some parts with Gel blaster specific parts.

@franksworld9922 Год назад

Oh that's what this is for. I have been putting hair gel in mine.🤔🤭

@engineerable Год назад

Gel balls also make good hair gel

@franksworld9922 Год назад

@@engineerable only LA looks for me.

@ZedricVa Год назад

Hi, got a question do i really need to buy the official ammo from the Splatrball site for my splatrball gun? And if not can i buy other brand ammo or does it effect the fps in sort of way?

@engineerable Год назад

You can use any 7.5mm ammo. Higher quality, harder ammo will perform better than Splatrball's fairly generic ammo.

@ZedricVa Год назад

Thanks.

@RayneHellfire Год назад

:O High Capacity Magazine-Clip.

@ivanfigueroa2990 Год назад

so from what im seeing in this is that its not really the containers problem it is the place you are using it on, i mean if you were to use it on a plastic table you could move the mags in different wats, the way it crushes the beads on closing it sucks though, would buy it

@engineerable Год назад

Even when I use it on a table, I end up pulling it out such that it balances on the edge, and shaking it a little.

@ivanfigueroa2990 Год назад

@@engineerable dang they might need to make a v2 with a longer exit piece

@itzjeremy811 Год назад

Can I use the brand gel blaster beads on my splatrball

@engineerable Год назад

Any 7.5mm ammo will work (7-8mm)

@vick2303 Год назад

One tip I would say is to leave some water to make the dispensing smoother

@engineerable Год назад

The water self drains, and the balls stay wet on the surface. You don't want excess water in your mags or hoppers. All the water should be drained before dispensing. Otherwise it can damage your mag or blaster.

@Famous0pp Год назад

@@engineerableright

@jorgeayon5636 Год назад

Hey j have a question my slatrball will skip some bullets like i shoot and it shoots but it skips some i did let the ammo for 4 hours what can i do

@engineerable Год назад

Full auto, single fire, or both?

@jorgeayon5636 Год назад

Both. When i shoot in single it takes a lo g time to shoot a bullet out and when its on full auto it skips some bullets it shoots but it skips them do you know what i can do?

@BL98334 Год назад

I got a black red slr m4 cqb can it also fill that one

@engineerable Год назад

Probably yes

@TheRudeisland401 Год назад

I bought one and it does NOT close at the bottom all the way, i can store gel balls in here but you CANNOT grow them in here... i guess it varies if you get a good one or not. mine leaks like crazy.

@engineerable Год назад

@Rashad Howard That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

@rashadhoward3903 Год назад

@@engineerable got mine from Walmart yesterday and fresh out the box it leaks

@engineerable Год назад

@@rashadhoward3903 That sucks, it sometimes happens to mine when they sit with the valve closed for a while. The rubber seal on the door has come off. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

@gonzo26nix Год назад

2:55 so.. what you're saying is.. is that the bucket can get knocked down, just to get back up again, and that you're never going to keep it down? (cues Chumbawumba song)

@engineerable Год назад

😂

@markiemw7646 Год назад

What do I do mine won’t stop leaking from the bottom

@engineerable Год назад

I recently noticed that the gasket can get stuck to the opening. Pull it out with your finger and reseat it on the door. Seems like a major flaw, because it will continue to happen once in a while.

@_DQ_ 2 месяца назад

my mag doesnt have a top open part only of the sides

@engineerable Месяц назад

That sucks.

@Guy-Void Год назад

I have this and it is very hard to open and close

@engineerable Год назад

The dispensing flap? Yeah, I mention in the video that it's not as easy as it should be.

@AMIRKED Год назад

The ants be like: OHH WOW WHAT U GOT HERE… oh thats a can and a GEL Mag so bigg

@saiku8003 Год назад

Imagine if someone made a mod with this was the ammo storage of a top magazine gel blaster

@engineerable Год назад

That would be crazy! Crazy heavy!

@holycrusader3119 Год назад

@@engineerable Mounted turret mode: Activated.

@Ruezzreacts27 Год назад

Do you service gel blaster for people ?

@engineerable Год назад

Sorry, no, I only make videos of modding.

@Staypositive_qoutes Год назад

How long does it take to get 10K to 6-8 mm

@engineerable Год назад

Let them soak for 4 hours.

@baseball_fanatics1293 Год назад

Anybody have a link for better quality gellets?

@engineerable Год назад

Here's a list of the best gel balls www.engineerable.com/single-post/best-gel-ball-ammo-for-gel-blasters-7-5mm-or-7-8mm-diameter

@baseball_fanatics1293 Год назад

@@engineerable thank you

@codoL73 Год назад

He killed the ant!

@engineerable Год назад

Rest in power 🐜

@kaorupangilan6288 Год назад

a sealed tab in front of the spout that slides upwards wouldve been a much better way to control the gel balls.slide it a little up to only let the water out, then slide it out fully to finally let the balls themselves out. then you can just slide it back down to close it with no loses. That tab is just asking for an eventual snap

@engineerable Год назад

Yes, I also found out that the gasket will sometimes stick and come of the flap which causes it to leak until replaced properly

@notConga Год назад

Unfortunate, this wouldn't work on our Aussie magazines, they have a much smaller fill hole. Otherwise this looks like a mad little gadget. Back to the good ol' milky whites in a 2L orange juice bottle for me then!

@engineerable Год назад

I've heard the bottles you all use for filling the mags are better/faster. The issue I have is draining and getting the gels in those bottles without spilling a ton. Maybe I should use the Gellet Depot to fill the speed loader bottles.

@TheCarpet- Год назад

I can’t believe gel blasters are illegal here in australia They’re quite literally just little bits of jelly, and not to mention, they are a kids toy, how does that work out?

@engineerable Год назад

Yeah, that sucks.

@chezlordtheinevitable5726 Год назад

Oof you must not live in Queensland because you can get them here

@MobileDecay 4 месяца назад

Lollipops are next on the chopping block! 🤯

@fishingsomedaynotsunday Год назад

This is for adults?

@engineerable Год назад

Depends on the blaster. The pistol blasters are weaker and good for kids. The rifle sized blasters are stronger and good for teens and adults.

@markw.4679 Год назад

I have a gel blaster to play with my boys. They will remember it for the rest of their lives. I also own two Hasbro lightsabers to battle with them too. Great fun!! 👍

@rayderian2212 Год назад

Can I have a joe blaster

@AdrenalineRushMX Год назад

its biodegradable?

@engineerable Год назад

What, the ammo?

@AdrenalineRushMX Год назад

@@engineerable yes

@shaddymate4095 Год назад

A water bottle does the same thing for a fraction of the fraction of the price

@newsupercool79 Год назад

I just use soda bottles

@anthonyking5942 Год назад

For its price it’s not worth it, maybe if it was like 5$ but it’s nothing special and anything else has just the same speed and consistency tbh. just my op tho 🤟

@engineerable Год назад

What do you use?

@lebthot5787 Год назад

@@engineerable water bottles 😂 work great and are portable, you can also drain em easily and squeeze the air out them so they don’t crunch and rattle while you running💯plus the small back pack i run with already has 2 water bottle slots for quick reload

@engineerable Год назад

@@lebthot5787 Makes sense for personal use. I hope this bucket will be better for gel blaster party with friends who are novices and make a mess with bottles. I've had a lot of spills when playing with friends. Maybe I'll put a 5 gallon bucket under this to catch F ups.

@lebthot5787 Год назад

@@engineerable good call fr, i’ve personally just never played a style where i’d be able to retreat to a fixed position to reload with one of these. new people do be spilling a whole bottle in the car

@kill3rgamingxd114 Год назад

@@engineerable bottles are better

@rncj4535 Год назад

I didnt het a funnel with mine

@engineerable Год назад

Sucks, but should be easy to make with some thin plastic. Cut and bend the plastic window from product packaging to make your own funnel

@bighammy1k520 Год назад

SEE 1200

@thegamingweeb3890 Год назад

3:10 “slams contraption into table. (Not even a minute later) “so it seems that some of them are already broken since being grown”

@engineerable Год назад

😂 the gels are not nearly that fragile...

@thegamingweeb3890 Год назад

@@engineerable it was a joke

@engineerable Год назад

@@thegamingweeb3890 ahahaha, got it, others have commented that and I think some are seriously thinking it did break the gels. Sarcasm is hard to read.

@TanSolo60 Год назад

what you need is the black bottle gel speed loader you can pour the gellets into the bottle and use the spout to load the gellets whithout loseing any.

@engineerable Год назад

I'm gonna make the 3L bottle version of that, otherwise it's go crazy refilling that little bottle. We go through 10,000 gels in no time.

@ammonbergevin5302 Год назад

Tips over the entire bin 3-4 times 'Something I noticed is that some of the balls are already broken'

@engineerable Год назад

The gel balls are not that fragile. If they were, it would be a problem.

@inkycat191 Год назад

I see no reason to buy this why I would need it, can’t i just use a bottle and have an extra bottle cap that got drain holes that aren’t big enough for the gel balls?

@engineerable Год назад

You can, and I used bottles before this. This just simplifies the whole process.

@rashadhoward3903 Год назад

Mine leaks

@engineerable Год назад

The rubber seal on the door has come of. Push it back on the door and make sure it's properly sealed. It's a bad design I only discovered after making the video

@rashadhoward3903 Год назад

@@engineerable tried that and it won’t properly seal all the way I’ve pushed it on as hard as I can it still leaks… kinda sucks

@engineerable Год назад

@@rashadhoward3903 when I said push, I mean that the seal needs to go over a mushroom like piece of plastic to lock it in place on the door. If it's not seated properly it will continue leaking.

@Wyrm_The3rd 11 месяцев назад

cant you just make your on diy one with one of those wine thingies

@engineerable 11 месяцев назад

Sure

@Wyrm_The3rd 11 месяцев назад

@@engineerable cool

@donaldmott4213 9 месяцев назад

I have one... I made the mistake of leaving it open the first time I used it and lost 5,000 gels 🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️

@engineerable 9 месяцев назад

Whoops, yeah it would be nice if it was spring loaded shut

@donaldmott4213 9 месяцев назад

@@engineerable have you tried the softien gel blaster yet? If so can u do a review on it? because I've been thinking about buying it

@engineerable 9 месяцев назад

@@donaldmott4213 I recommend buying something better quality. Check out this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023

@donaldmott4213 9 месяцев назад

@@engineerable I seen a couple that I liked, the unlox v2 pistol seems good, I didn't see the vector on there though, I wanted to get it too but it looks gas powered, and I don't want to hurt someone

@glitchemerald9866 Год назад

Gel blasters have changed my life and not in they way you’d think You think I’m going to say ( they changed my life so things are fun) No what I mean is when someone tells me to touch grass I can’t the moment I go outside the entire neighborhood shoots me with those guns and it hurts worse then a nerf gun and you might say well it’s just some kids Here’s the thing they go around the neighborhood passing theses guns out to shoot I’m not risking a day in the hospital to bruises and injuries

@engineerable Год назад

WTF bro?

@salvation7362 Год назад

Maybe... and hear me out, maybe... some broke when you repeatedly knocked the container over onto the table!?

@engineerable Год назад

They're not that fragile.

@bang._banggg Год назад

It’s not flowing because you don’t have it opened all the way.

@kaidencarrington Год назад

THE BUG GOT KILLED RIP 😢

@thinhbui4182 Год назад

rather buy the black bottle, cheaper

@GlazedOver09 Год назад

Was i the only one watching the ants die

@engineerable Год назад

Nope, I never noticed it myself, until a ton of people started commenting about being an ant killer

@nanauejohnson4990 Год назад

You forgot the SRB-375!!!!!

@engineerable Год назад

Would probably work fine.

@samplays2199 Год назад

Bro has inf gel balls

@engineerable Год назад

This is nothing...

@FurryEskimo Год назад

Are gel balls like this dangerous to the environment? I know people assume they aren’t, but I’ve also heard of issues where a bunch go down a drain and clog a neighborhood’s sewers, or places where they’re left in fields and when it rains they swell up and animals eat them. Are we SURE they degrade over time? I thought it was like, a weird crystal,

@narutofox2100 6 месяцев назад

There bio degradable and they burst on impact 👍

@cheesygerit2299 Год назад

6:50 damn ant killer

@justinballard7765 Год назад

Tilt it back an it wont smash the gel balls

@motocaleb3790 Год назад

I wonder why they’re already smashed you were literally knocking the thing over

@engineerable Год назад

😂 the gels are not that fragile.

@chosenstatus Год назад

some smashed maybe because you kept dropping the damn thing on the table? lmfao

@engineerable Год назад

😂 if the gels we're that fragile...

@ZestyT Год назад

Tons of user error in this video

@jaydeeharris2344 Год назад

def not work the price

@thetophattedmonkey8791 Год назад

3:24 they are broken probably cuz you slammed it over a bunch

@engineerable Год назад

Gels are not that fragile. Throw one at the ground, and it will just bounce. Many don't even burst on impact. Those are broken from the package.

@SweatyBobtheBot 11 месяцев назад

or they could have smashed when you were throwing them around like a rag doll

@engineerable 10 месяцев назад

They're not that fragile

@KeysNoE Год назад

or you could just buy a speed loader from tactical edge 💀

@engineerable Год назад

The speed loader bottle is probably faster to load a mag, but you still need to grow the gels and strain them. This is an all in one solution. Also, why don't they make the speed loader bottles clear so you can see how much is in there?

@KeysNoE Год назад

@@engineerable I dunno, I think the black is just for asthetics tbh

@KeysNoE Год назад

@@engineerable I wonder if there is a clear 3d printing filament that you could make one with

@engineerable Год назад

@@KeysNoE I was thinking about 3D printing a nozzle that fits over a clear soda bottle's cap. Still have to soak, drain, and get the gels into the soda bottle though.

@KeysNoE Год назад

@@engineerable what if you did it inside the soda bottles? Maybe had a little slider to drain and stop gels from getting out

@yongyea4147 Год назад

$289 No thanks!!!!!!

@samracine8617 Год назад

This is cap Mine leaked immediately

@engineerable Год назад

Sucks! I noticed that the gasket on the door flap can come off. I never had the issue, but others who didn't know what they were doing managed to get it to come off. Check that.

@Yourmom-ll2gw Год назад

all right now shoot every single round that you loaded

@engineerable Год назад

That's what your mom said... 😂 (username ✔️ out)

@Obsnano Год назад

This is such a waste of money

@cityoftrees9953 Год назад

One of my splatrballs is fuckedup. Every time I shoot the gel balls break

@engineerable Год назад

Maybe a problem with the tappet plate. Could be bent, but that usually only leads to not firing. First thing to try is hardened gel balls like the Warinterest 3.0

@cityoftrees9953 Год назад

@@engineerable thanks I’ll try those. And it came out the box not firing.

@engineerable Год назад

@@cityoftrees9953 If it did that from new, then it's likely a dud. I had one that didn't shoot consistently and returned it. Later I figured out that it's the tappet plates are already bent sometimes and doesn't pull the nozzle far back enough to load a gel ball.

@cityoftrees9953 Год назад

@@engineerable man it said don’t return to the store or I would have. Now I’m stuck tryna make it work smh. May just try to return to the company.