Easy DIY Red Truck Christmas Ornament (Decoupage tutorial)

Подписаться 30 тыс.

Просмотров 4 тыс.

50% 1

Red Truck Christmas ornament (decoupage tutorial) In this video, I'll be showing you how to make the ever so popular Red Truck Christmas ornament from one of those little wooden blanks that you find in the craft stores. I'll show you how to do some 3d effects with air dry clay , as well as adding pictures with a decoupage tutorial. This is the fifth ornament in a 6-part series. There is 1 more ornament to go! Be sure to Subscribe, so you don't miss any of them! Everything I'm using is listed below under
the "Supply List".
If you make this ornament, send me a comment. I'd love to hear how yours turned out ❤
If you enjoyed this video, please like and subscribe so in the future you can see more instructional craft videos like this one. Click the bell if you want to be notified anytime I add a new video. 🔔
Let me know what craft video you would like to see next, in the comments. Your video could be next! ❤ For some ideas, check out my Etsy shop, see link below. 😍
www.etsy.com/shop/MasonCreati...
Previous ornaments in this series:
Ornament #1 3D Violin: • Easy DIY Christmas Orn...
Ornament #2 Songbirds: • Easy to make DIY Chris...
Ornament #3 Poinsettia: • DIY Poinsettia Christm...
Ornament #4 Christmas elves: • Easy DIY Santa's Elves...
Glitter ombre Mermaid mason jar soap dispenser: • How to paint an easy g...
Links to connect with me:
My Channel: / @masoncreationsetc
My Etsy shop: www.etsy.com/shop/MasonCreati...
My email: masoncreationsetc@yahoo.com
🎯 Disclosure: Some of the below links are affiliate links; where I'll earn a small commission if you make a purchase at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
My favorite Tools:
Bowdabra Mini Bow Maker (Amazon): amzn.to/3QZpwFj
Clay sculpting tools (Amazon): amzn.to/3NGiORU
Cricut cutting machine (Amazon): amzn.to/3J6kpNz
Mat-extra large silicone work mat (Amazon): amzn.to/3RrXV0P
Mini hand sander (Amazon): amzn.to/3jk4eVQ
Pink disposable gloves (Amazon): amzn.to/3HGHV4R
Rhinestone picker (Amazon): amzn.to/3u8AZbf
Sponges Round (Amazon): amzn.to/3v1Obz0
Sponges on Stick (stippler): decoupagenapkins.com/products...
Speedball Pink Soap brush cleaner (Amazon): amzn.to/3rFzLml
Surebonder cordless hot glue gun (Amazon): amzn.to/3PVoOs6
Water brush pen: decoupagenapkins.com/products...
Supply List:
Oblong ornament: www.hobbylobby.com/Christmas/...
Red Truck picture Etsy: www.etsy.com/listing/87287257...
Triple thick glaze (Amazon): amzn.to/3JpaTVJ
Delight Clay White: decoupagenapkins.com/products...
Christmas silicone molds (Amazon): amzn.to/3eSCwNK
Black flash paint: www.hobbylobby.com/Crafts-Hob...
Metallic Lustre Gold rub (Amazon): amzn.to/3rFerNR
Misc supplies:
glitter, ribbon, trim, Christmas paper, crushed beads, Christmas greenery and poinsettias,
misc paint colors, rhinestones

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@evanestrick322 7 месяцев назад

Love it

@masoncreationsetc 7 месяцев назад

Hi there! Thank you and I'm happy you enjoyed this video! Thanks so much for watching and taking the time to send me a message 😊💖

@gizmo7877 Год назад

I love this ornament for so many reasons. So beautifully done with great embellishments, and I’m obsessed with the little red truck, so fifties with beautiful memories of my childhood Christmas’. That crackle application is the best. I like the one application. All your wonderful work produced an ornament anyone would love to own. Or better still, a great gift for special family and friends.

@masoncreationsetc Год назад

Thank you so much Gizmo! I'm actually in the process of making more Christmas ornaments. You'll get to see them soon 🎅🎄❄

@gizmo7877 Год назад

@@masoncreationsetc Don't forget the Angel! looking forward to that one.

@masoncreationsetc Год назад

I won't forget the Angel 👼 She's in line to be worked on next week. I just finished up a Reindeer, some gold bells and a Santa plaque. I'm working on editing them. Talk soon, my friend 🎅🎄❄

@HealthyUandI 2 года назад

I love that one. It's my favorite so far. Great crafting work 😁🥰👍

@masoncreationsetc 2 года назад

Thanks Marie, glad you like it. The little red truck is so popular.

@TOConnor12 2 года назад

I love your attention to detail. Can't wait to see what your next videos will be about. Merry Christmas 🎄

@masoncreationsetc 2 года назад

Thank you! You too! 🎅❄

@doravasiliadi2441 2 года назад

Thank you very much for the lovely videos of yours. Have wonderful Christmas holidays!😊

@masoncreationsetc 2 года назад

I'm so happy you're enjoying my videos. I hope you had a nice Christmas!

@KT-rl1dy 6 месяцев назад

If i tried to tap the paint brushes together. I would make a mess. How long did it take to learn that technique? I am glad i found you. Thank you .

@masoncreationsetc 6 месяцев назад

Hi there! I'm glad you found me as well! Did you make the paint very thin and watery? Also a fan brush works best. You'll need to tap it lightly. Try tapping it with your finger instead of tapping it against another brush. Practice on a plain piece of paper until you get the feel for it. Let me know if this works. Thanks so much for watching and taking the time to send me a message 😊💖

@angelahealy3922 9 месяцев назад

I loved watching this tutorial. I do have a question. Did you print the red truck with a laser color printer or an inkjet printer? I have found my inkjet prints tend to "run" the color so I was wondering if you sealed the print before mod Podge if you used an ink jet? Thanks so much! Angela

@masoncreationsetc 9 месяцев назад

Hi Angela, I'm so pleased that you enjoyed this video! I printed the picture with an inkjet printer. If you print with an inkjet, the ink will definitely run if you don't seal it first. But don't try to use any type of brush on sealer, they are water based and will make your ink run. Use a spray on clear matte sealer and give it a couple of coats front and back. It will dry really fast. I'll leave you a link for the one I use. It works perfectly! I have actually recently found a product that works so much better than Mod Podge for decoupaging. It's called Polyvine. You can't buy it in stores, so I'll leave you a link for that as well, and it's a safe link. I use it to glue it down and to seal it afterwards. There are several different formulas, but for normal everyday items I use the "decorators varnish" If you are doing coasters and need heat and water resistance you'd use the "heavy duty wood varnish" I think you'll like it. Thanks for watching and taking the time to send me a message 😊💖 Matte spray sealer (Amazon): amzn.to/3j19tGm Polyvine Varnishes: decoupagenapkins.com/pages/search-results-page?q=polyvine%20varnish&sca_ref=3969749.C8aAXEduCt

@angelahealy3922 9 месяцев назад

Thank-you for your assistance. This is very helpful information. I will check out the products. I have been looking at the Polyvine Varnishes for sealing my coasters I am making. They didn't have that last year when I purchased my napkins from decoupage napkins. I do have another questions. I see that you are using a gloss varnish, would you mind sharing what brand of gloss varnish. I noticed that you store it in a jar. Thanks again for such wonderful videos and your assistance. @@masoncreationsetc

@masoncreationsetc 9 месяцев назад

Hi Angela, Polyvine is excellent, but it's hard to find. The link I gave you will take you right to the Polyvine section. I'll leave you a link for the gloss varnish I used. It's really nice. Goes on thick and self levels. Water clean up. It comes in a can and I believe it's a quart. I store it in a big mason jar because the rim of the can gets nasty. I use it a lot! It's actually waterproof as well, but I'm not sure if it's heat resistant, so it may not be good for coasters. Painters Touch gloss clear (Home Depot) : www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-30-oz-Ultra-Cover-Gloss-Clear-General-Purpose-Paint-242057/100674057

@angelahealy3922 8 месяцев назад

Good Afternoon, I have a question maybe you can answer. I'll start with the supplies I have/used. Purchased wood ornaments, painted with white acrylic paint, printed images and sealed with the 2x matte acrylic spray you recommended, I actually printed mine on a printable rice paper from Amazon which required a bit more drying time after sealing. I tore the images to soften the edges, decoupaged onto the little painted wood blanks, waited for then to dry and then went back around the edges of the paper to attempt to blend in to the wood blank. I can still see an edge of the image even after trying to blend the paint. I tried a brush and a little sponge pouncer. Is there a technique I'm missing? Any thoughts would be greatly appreciated. I just ordered the polyvine wood varnish. I am looking forward to using this. Thanks for all your great videos and look forward to some Christmas you might have coming up. Oh...I am using little paint jars you can get at Home Depot mixed in a multitude of colors. Right now I have white and a slightly off white but lots of colors of craft paints. Angela @@masoncreationsetc

@masoncreationsetc 8 месяцев назад

Hi Angela, sounds like you did everything correctly. Because rice paper is so fibrous, it doesn't disappear. You didn't miss a step. It's impossible to make edges disappear completely. Napkins are the most invisible because they're so thin, and even then, you can slightly see the edges. The Polyvine does help hide edges a little better than the mod podge. Do you want to email me a picture of what you're having trouble with? Maybe I can offer a solution. Sometimes we look at things a little too closely and are very critical with our own creations. No one else will look at it as close as you are. I'm so used to seeing those edges, that it doesn't bother me anymore. lol... I'll leave you my email address below. I'm happy to take a look 😊 Don't you love getting your craft paints mixed at Home Depot? I actually started doing that during covid when craft supplies were almost impossible to find. I liked it so much, I just kept buying them there. 📧My email: masoncreationsetc@yahoo.com