Easy Press-Fit Bottom Bracket Replacement

Подписаться 10 тыс.

Просмотров 77 тыс.

50% 1

Easy Press-Fit bottom bracket removal and replacement without a bearing press. If you have a bike with one of these, you WILL eventually need to replace it, probably sooner than later. I was intimidated by the thought of trying to do it myself because I was afraid I'd damage my bike but it's pretty easy. I paid $85 for the BB, a wrench and the removal tool. Here are the links to what I needed:
Here are some affiliate links. Clicking costs you nothing but will help support my channel. Thanks!
Bottom Bracket: amzn.to/2LkrCP8
Threaded BB removal tool: amzn.to/2PLWL2o
Bearing removal tool: amzn.to/2ZLpdBj
Park Tool Anti-seize Compound: amzn.to/2zWSWNc
Also a hammer, 8 and 10mm hex sockets, rags, grease and cleaner.
Music by: www.audionautix.com
Instagram: / trailbreaker01
#mtblife #trekfuel #bikerepair

Опубликовано:

8 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@mtbboy1993 5 лет назад

Nicely done, evry thing was done correctly and well presented.

@LunchRide 4 года назад

Thanks for this video. I'm going to need to remove mine and this vid provided some comfort on the process!

@TrailBreaker 4 года назад

You're welcome! Glad it helped.

@napoland9676 3 года назад

Thanks for the link to the BB. My SRAM Dub just kicked the bucket yesterday.

@TrailBreaker 3 года назад

Glad to help

@graemepalmer6991 4 года назад

Very helpful, thanks!

@TrailBreaker 4 года назад

You're welcome, Graeme!

@eddie2go 5 лет назад

just heard the dreaded creak today on a ride. Seems pretty easy since I also have a 18 fuel ex. Thanks for the knowledge.

@TrailBreaker 5 лет назад

Bound to happen :-(. Glad I could help. Thanks!

@DHFlip18 4 года назад

Love your videos, they're well presented, don't drag on and full of great ideas 👍. Shred the gnar and party on!

@TrailBreaker 4 года назад

Thanks, Buddy! I hope to inform and maybe entertain a little along the way. I try to edit brutally because you have a lot of RU-vid to watch! Thanks for Watching :-)

@DHFlip18 4 года назад

@@TrailBreakerYour effort is evident and much appreciated. As is humor (something often lagging in other videos). I've watched several of your videos and will continue to do so, definitely turned me into a subscriber.

@TrailBreaker 4 года назад

Downhill 4Life Thanks 👊 . Your encouragement means a lot 😁👍

@BangArgo 2 года назад

Thanks for sharing..very nice information

@TrailBreaker 2 года назад

Glad you like it! Thanks👊🏻

@emilegoguely4032 4 года назад

Perfect, (I'm actually picking up a fuel ex) I am impressed that the prongues still have something to catch even with that middle-spacer

@TrailBreaker 4 года назад

👍🏻

@emilegoguely4032 4 года назад

Got them out, holy smokes was it a bear, used a heat gun vigorously and one side still didn't want to give. Over night soak in wd40 and full forces the next day got it

@TrailBreaker 4 года назад

Emile Goguely WOW! Way to stick with it. Nothing worse than thinking you’re gonna have to take it in and have a pro “fix” your mess😁

@mtbboy1993 5 лет назад

This seems to be a nice bb, stock was probably junk, but bb should be serviced, but the new is clearly a better design.

@ssirany 4 года назад

u r awesome my friend 👍🏼

@TrailBreaker 4 года назад

Thank you! Cheers!👊

@TrailBreaker 5 лет назад

This is easier than you may think! Do you have one of these? Quiet or noisy? Let me know

@dineshhanda2301 Год назад

Hi, I tried in the same way for removing the pressfit part, but even after giving a lot of hard bangs with the hammer, it's not moving. Please give your expert advice.

@tristantopambudi3186 3 года назад

I'll try to do it to mine once I get the right BB as I don't know which BB I need ,Scott specs only wrote Sram GPX PF 41×89,5 mm , there are so many online I don't knowIs it BB86 or BB92 to buy ? I could used help Thanks

@apparentlynobody 3 года назад

You are looking great. 👍😀

@TrailBreaker 3 года назад

21 1 21 Thanks!?

@peytonpettibone3836 4 года назад

Will this work with Race Face Evolve SS Crankset 170mm NW32T Black 9/10/11 crankset?

@ramonskepweng333 4 года назад

Is the dub spindle fits that bb

@masoudbj8649 Год назад

How to service the bearing of the new BB?

@rontalampas5329 4 года назад

Would the spacers provided go on after placing the dust cap?

@TrailBreaker 4 года назад

Yes, I'm pretty sure. I didn't need any spacers but if you tighten the arm on and it's still got some side-to-side play, add them.

@davidrogers1507 4 года назад

I would really like to find a non press fit replacement for my creaking BB92. I have a race face next R crank with a 30mm crank shaft ...not sure what crank set and diameter is on your ride? ...hoping tri peak has one that will work for me ...

@2cyclebikeraricstreet195 2 года назад

Did it work? Nice ideabut steel? Too heavy. Is therre an alternative? Al alloy?

@polishguywithhardtospellna8227 4 года назад

I'm looking to replace dub pressfit 92 on bnbike and DIY removal and install came to memory, so started looking at people's ideas and eventually came here. I've got same bike ha ha ha Correction:no I don't, mine is alloy ex7

@headoverbars8750 4 года назад

I did a double take too. I have the EX 5 same frame as yours.

@TrailBreaker 4 года назад

Cool! Hope it helped👊

@MrOzzy281 3 года назад

2 hours later, after splitting a curtain rod offcut to make this tool, all done.

@MaYbYl8eR 4 года назад

I just tried to do mine exactly like this with the same parts 2015 trek fuel ex7 I couldnt get the 2 sides to close up on the bottom bracket without a lot of torque. So much that o stripped the bb. Had a hard time getting it off. 60$ out and bikes taken apart

@TrailBreaker 4 года назад

Oh crap! What are you doing?

@jakeua-o7014 2 года назад

Bb92 for deore m6100 crankset fit?

@kimjongduex7431 4 года назад

I’ve got this job to do, I’d love to know how this bb performed? Is it still going strong?

@TrailBreaker 4 года назад

Yes. 100%

@Knud451 5 лет назад

Good info! How has you experience been with it since then?

@TrailBreaker 5 лет назад

Thomas Hemming Larsen Zero issues! Design seems solid👊🏻👍🏻

@Knud451 5 лет назад

@@TrailBreaker Nice. Thank you!

@subseven949 4 года назад

that new threaded BB looks like it's sticking way out on the drive side. Did you have to realign your rear derailleur?

@TrailBreaker 4 года назад

No. I see what you mean but he cranks are still perfectly centered on the frame

@jonienglish3231 4 года назад

Good Video what Casio Watch is that ?

@TrailBreaker 4 года назад

Thanks! I don't remember. It's a $15 knock-off that lasted about 2 years. I'm pretty rough on watches😀

@Nivacromcolumbus Год назад

Brilliant video, did the BB last long? Thanks

@TrailBreaker Год назад

About 3 years in pretty harsh conditions. No complaints. Eventually swapped to DUB crankset

@Nivacromcolumbus Год назад

@@TrailBreaker nice one, thanks for replying. 👍

@larryt.atcycleitalia5786 2 месяца назад

Did I miss the test-ride part where the bike was creak-free after the replacement? And then there's the issue of...for how long?

@TrailBreaker 2 месяца назад

No you didn't miss it but the new BB lasted about a year and a half when it got noisy again. Tried to keep grit and degreaser out but they never last forever. PITA

@efrenryan9044 2 года назад

i have ordered the same bb, may i know how long that tripeak bb you installed lasted?

@TrailBreaker 2 года назад

Three years. I removed it once last year and cleaned and repacked the bearings from creek crossings. I just swapped it out for a DUB crank and BB NOT because of the BB. I was quite happy with it!

@Metal-Possum 4 года назад

Sram cranks are a gift from the devil. Not only does the GXP standard destroy one bearing faster than the other, it also has some known tolerance issues which results in some very sloppy fitting.

@TrailBreaker 4 года назад

Alex Paulsen Yep

@rontalampas5329 4 года назад

What SRAM crankset are you using? Also what is the spindle length and width?

@TrailBreaker 4 года назад

It's the Sram Descendent crank, 175 mm cranks and I think the width is 92 mm (BB92)

@2cyclebikeraricstreet195 2 года назад

@@TrailBreaker spindle length must be 92mm...width is diameter of spindle? 24 29 or 30mm? Doesn't look 34mm

@standingsideways85 3 года назад

Lol 😂. That sounds like my bike 😳

@TrailBreaker 3 года назад

Sorry! 😀

@justinwbohner 5 лет назад

There is a hole in the end of that bb tool you're using to tighten, correct? Slip the hook of your hanging scale in there and pull it until it shows a force that is 30N-m according to some simple math using the distance to center. You can get an exact torque this way. Also, I saw red loctite residue during removal. You should have used loctite 609, which is green.

@TrailBreaker 5 лет назад

Justin Bohner Good to know! Thanks! I just used the actual torque wrench on something else and tried to repeat the relative force. Is green more or less lock than blue? I don’t have that

@justinwbohner 5 лет назад

@@TrailBreaker 609 is designed for cylindrical fitment. The blue is usually threadlocker.

@TrailBreaker 4 года назад

Justin Bohner Cool! Thanks. Never knew👍

@rontalampas5329 4 года назад

Are the spindles 24mm thick

@TrailBreaker 4 года назад

I think it's 22 mm on the drive side

@elvyskennethmiguel8817 3 года назад

What is the size of you bb inner diameter? Is it 29 or 30mm?

@lux-3001 Год назад

GXP has 24mm drive side and 22mm non drive side spindle.

@rontalampas5329 4 года назад

Is that a cf frame?

@TrailBreaker 4 года назад

ron talampas Yep. Except for the chain stay.

@mtbboy1993 5 лет назад

You should try oval chain ring.

@TrailBreaker 5 лет назад

I have an Absolute Black on my Motobecane and love it! Feels like I have one more granny gear :-) Is there one that will fit this crankset?

@mtbboy1993 5 лет назад

@@TrailBreaker yes they make it for all cranks I know off, but to sure if they got vintage cranks but all the common standards they have, Sram, Shimano, four bolt, direct mount, for all of the brands.

@TrailBreaker 5 лет назад

Cool! I didn't know. Thanks

@mtbboy1993 5 лет назад

@@TrailBreaker if you got more questions feel free to ask, I am kind of a bicycle encyclopedia, I research so much.

@rontalampas5329 4 года назад

Having difficulty finding a crankset that’s compatible with tripeak

@TrailBreaker 4 года назад

ron talampas I think the SRAM cranks are all the same fro MTB and are, I believe, 24 mm on the drive side. The BB in the description fit perfectly

@rontalampas5329 4 года назад

Could you place a link for Tripeak bb86/92bra (shimano)?

@tobygraham45 4 года назад

@@rontalampas5329 check out wheels mfg, they should have one you're looking for

@jackdaniels2127 9 месяцев назад

Mine bearing won’t come out. Stuck

@konradc12 8 месяцев назад

I had the same problem trying to replace my Giant road bike press fit bottom bracket. I checked online here in the UK and found cheap bottom bracket removal kits, that fit every size of bottom brackets without using impact force. My kit is branded Lixada, but they are all the same. It is designed to remove the bottom bracket, and install. I replaced mine a few days ago. Look at this video of how it works - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bBLMemDW13s.html&ab_channel=FirstComponents

@hoptard 3 года назад

same as Wheels Mfg out of Colorado, another great Bottom Bracket/Bearings maker....BB86 Fat Bottom Bracket was a piece of cake on my carbon 90 SuziQ Fatbike, 177mm rear. www.wheelsmfg.com

@TrailBreaker 3 года назад

Thanks for the link!