FIX Engine Surging on any small engine QUICKLY

How a Primer Bulb Works

ЧЕСНОК + ЧОМПЕР = ИМБА! / ТАКОЙ ГИБРИД МОД Я ЕЩЁ НЕ ВИДЕЛ

открыли бесплатный магазин техники - все по 0 рублей ч4 - удивили мужика.

ЭТО НАСТОЯЩАЯ МАГИЯ😬😬😬

EASY PRIMER BULB FIX FOR PUSH LAWN MOWER THAT DOES NOT START EXCEPT WITH STARTING FLUID DIY

Raley's Small Engines

Подписаться 54 тыс.

Просмотров 81 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Your push lawn mower only starts when you spray fuel, carburetor cleaner or brake cleaner into your carburetor. Then it runs fine.
This short, easy DIY video will show you how to diagnose it and the most common reason your primer bulb doesn't work.
At one point in the video I said vertical and meant to say horizontal.
CLICK THIS LINK FOR THE 2 STROKE PURGE / PRIMER VIDEO
• Simple Trick For Corre...
CLICK THIS LINK TO REPAIR / REBUILD PLASTIC CARBURETOR FOR FREE VIDEO
• Plastic Carburetor, Re...
CLICK THIS LINK FOR OUR STORE TO GET YOUR TSHIRTS HOODIES AND MORE !
my-store-cf5bc...
THE LINK TO OUR CHANNEL TO SHARE WITH YOUR FRIENDS
UCA9GlAGvSMsoXBPR77JTTJQ
Edited by YouCut:youcutapp.page...
EASY PRIMER BULB FIX FOR PUSH MOWER THAT DOES NOT START EXCEPT WITH STARTING FLUID
#smallenginerepair
#primer
#carburetor
@restore

Опубликовано:

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@RaleysSmallEngines Год назад

Click this link to visit our store to get your T shirts, Hoodies and much more my-store-cf5bc2.creator-spring.com

@toneloc698 2 месяца назад

Thanks for mentioning the brake cleaner for the carb. It worked! My wife and I were happy. We had company coming over so it had to get done. Thanks again brotha!

@tomshearer7409 6 месяцев назад

This helped me out to running condition 1st pull start for a friend of a friend who is very appreciative of you and your channel

@Markomyt1 3 месяца назад

A friend was "Working" on his mower and then it wouldn't start. He didn't line up the hole in the gasket with the carb "tube". He asked me how he was supposed to "Know" that those need to be lined up... I had no words for him...

@andreyzagoruyko5390 Год назад

THIS GUY KNOWS HIS STUFF THANK YOU SOOO MUCH! Chinazon, haven't heard that before, nice.

@RaleysSmallEngines Год назад

Wow, thank you

@ken48827 Месяц назад

Learned something new again today! Now can you do the same video on a Tecumseh flat head carb?

@TheBandit93 Год назад

This was an informative video for those who might have this problem great tip thanks for sharing. Take care and have a Happy New Year.

@RaleysSmallEngines Год назад

Thanks, you too!

@howardc1964 5 месяцев назад

heat gun unwarping priming bulb cover worked for me. Prior gasket has broken into pieces likely aiding in the warpage. Pretty easy to diagnose with the cover mounted and pressing bulb with no fuel coming out of the brass tube (Need to confirm bulb is producing air pressure with soak bubble test first)

@tinkeringtaylor3053 Год назад

Really good information T Bone, i know a lot of people have trouble with type of primer thank you Happy new year 🎉🎉🎉

@RaleysSmallEngines Год назад

Happy new year! Thanks for watching.

@juangil-xq9ng 3 месяца назад

ME GUSTO COMO SE PUEDE APRENDER DE OTRAS PERSONAS QUE TIENEN BUENA INTENCION DE AYUDAR......MUCHAS GRACIAS POR SUS VIDEOS ......MUY BIEN EXPLICADO

@francislang5075 Год назад

happy new year

@RaleysSmallEngines Год назад

Happy new year

@mr1pearl Год назад

The socket hack is a good one have to try it 👍 Happy New Year 🎇

@RaleysSmallEngines Год назад

Heck Yeah. Happy New Year

@philliphall5198 Год назад

I used a cheap set of pliers and welded welding 1/8 rods to it and bent them to fit the release points Works, $3.00

@RaleysSmallEngines Год назад

Awesome idea

@JungleBobRepair Год назад

Thanks for the tip!

@RaleysSmallEngines Год назад

You bet. Happy New Year.

@jrbrumble-iy9ed 5 месяцев назад

good job helped alot

@tomderrick7385 2 месяца назад

On my 6.5 HP Briggs engine and aluminum carb, the bowl gasket was worn, bleeding air pressure needed to push gas into the tiny venturi. If Raley’s method does not make a squirt into the throat, consider replacing the bowl gasket.

@michaelfarris2556 Год назад

Was that primer bulb off the new mowers they are making. I have one of those newer pieces of crap mowers. Plastic carburetor, why are they doing this?

@dkupy100 Год назад

$$$

@RaleysSmallEngines Год назад

These are very common, been around for years now.

@EWB66 5 месяцев назад

If you look down in the hole after you remove the primer bulb, you will see a screen that is removable. I have had those screens stopped up with dirt. Also, the reason that the primer doesn't work, is that the hole in the gasket is not lined up with the carb hole. Put the cover on and leave slightly loose. Get canned air with a straw or turn your compressor pressure very low. Blow air into the hole on the front of the primer bulb while moving the primer bracket. Once the two holes are lined up, you will see gas, tighten the bolts down. I have never had to install 2 gaskets or replace a bracket. It is almost always that the 2 holes are not aligned. For ease, I keep a can of canned air in my toolbox just for this reason. And yes, the whle can also be clogged like you said in the video.

@STTC Год назад

Another great video sharing the knowledge,,, Happy new year T-Bone and Mrs T ❤️

@RaleysSmallEngines Год назад

Thank you. Happy New Year

@BaronKube 3 месяца назад

I found out if you take a can of carb cleaner with a straw and stick it in the hole on the primer bulb and spray some in there, it might work. It fixed my issue lol, maybe it will work with someone else too

@Big_Johns Год назад

Looked it up, the primer removal tool is $55 and the insertion tool is $37, that $3 socket modification tool sounds like a great idea brother. 👍👊 Nice video T-Bone, Happy New Year to you and Mrs Bone. 🙂🎉

@RaleysSmallEngines Год назад

Yes I knew they were pretty expensive, just didn't know exactly how much. Happy New Year brother.

@Big_Johns Год назад

Too rich for me, I’ll be modifying a socket for sure. Thanks and Happy New Year to you and Mrs T-Bone too. 🙂👍🏼

@mikehrdlicka8635 Год назад

I use piece of 3/4 conduit for buld installation

@RaleysSmallEngines Год назад

Awesome great idea

@TheStevenc819 Год назад

I have the same model. On the fuel inlet side of the carb there is a smaller white nipple. Where does that attach?

@RaleysSmallEngines Год назад

It doesn't hook up to anything. Thanks for watching and commenting my friend

@ampg8862 Год назад

Chinazon ...Fleebay. 😆 🤣 😂

@courtneyroy270 3 месяца назад

Great show, the primer plastic vain you put soap in to see if it's working, does that lead to a jet hole on the carberetor at the end of the vain or valley, because mine doesn't so its going nowhere, what should it be doing please with the connection to the carb please

@TheRustyRooster Год назад

Good need to know information right here folks... y'all pay attention T-Bone dropping years of experience and knowledge on ya.... HEY MRS. T-BONE 👋

@RaleysSmallEngines Год назад

Thanks brother. Mrs T says hello

@RANS87IROCZ 5 месяцев назад

I was pushing mine had zero action and no start, found clogged jet on briggs n stratton 300 model

@OutlawCamper Год назад

Happy New Year! Nobody wants to revisit last year, but you might want to check out my "Holiday Show & Giveaway Winner" video from a week or so ago...

@RaleysSmallEngines Год назад

Happy New Year Jack. Thanks a bunch my friend. Just now catching up on RU-vid because we have been on vacation.

@jamessanders7408 5 месяцев назад

👍

@WadeWalker-p2j 3 месяца назад

I tried all of this to the point of buying a new base and primer bulb. Still not getting gas to the carb. Starts and runs fine with a little squirt of gas in the carb . What else can I try? Thanks!

@RaleysSmallEngines 3 месяца назад

Sometimes I use 2 gaskets and soak them in oil, then wipe them off b4 installing.

@benjurqunov Год назад

I've had several Tecumseh. The plastic housing gets hot and warps. They can get pretty bad.

@Iflew727 Год назад

Thanks for posting the video! I had cleaned my carburetor, put everything back together, and had no priming. That little channel was plugged with gunk. Easy fix!

@Turningwrenches85 Год назад

I like the tips I have some primer bases that are warped and will try those fixes to see if they help our my situation when I get to them . Good video t-bone

@francislang5075 Год назад

happy new year

@RaleysSmallEngines Год назад

Happy new year

@themowerman Год назад

Good information mate

@RaleysSmallEngines Год назад

Glad you liked it. Thanks Mick

@TomDobyMowerRepair Год назад

awesome video TBone! hey aint you supposed to be on vacation?

@RaleysSmallEngines Год назад

Thank you. Yes we were, but had fun doing the video. Happy New Year !

@philipbreau1246 Год назад

Would a bad float bowl seal prevent priming?

@rauljr9869 Год назад

Great video and even better tip on the how to make the modified tool for replacing the bulb! Thank you and Happy New Year to you and the Mrs.

@RaleysSmallEngines Год назад

Thank you. Happy New Year

@RayofallTrades Год назад

Great description of the issue and fix. Been a sub for a while and started making a similar channel trying to share any knowledge I have as well. Any advice you're willing to share for a newbie? Keep up the great work T-bone!

@RaleysSmallEngines Год назад

Awesome, thank you! Advice for RU-vid? Well I have no idea what I'm doing, just winging it the best I can. Just keep putting out content, someone will watch it my friend.

@RayofallTrades Год назад

@@RaleysSmallEngines thank you, will try that

@scottsprinkel3914 Год назад

Just came across your video.. very informative.. I replaced the carb on my john deere ja62 and ran like a champ but wasn't priming.. haven't tried your glue gun technique yet but I was able to get it to prime by using my hand to push against the housing and put a little extra on the bolts and wallah its priming.. it might be a temporary fix and if it is I will heat it up and try your technique.. thank you for the video and just subscribed.. and by the way this is a horrible design😅

@derekgraham1677 4 месяца назад

Any chance of free stickers plz. Your fixing Lawnmowers, helps me alot, when im fixing them.

@RaleysSmallEngines 4 месяца назад

Email me your address to raleytrans@gmail.com and I will get you some in the mail my friend.

@derekgraham1677 4 месяца назад

@@RaleysSmallEngines Derek Graham 18 church hill gardens, dromara, dromore, co down. Bt252NB. Northern Ireland. Thanks Derek

@francislang5075 Год назад

happy new year

@RaleysSmallEngines Год назад

Happy new year

@dusttoyou4550 Месяц назад

Sometime we just get lucky and find someone, like your channel, who has a fix we need! I will be following your advice on 4 cycle carb prime bulb fix. I have a question you may be able to answer. I have a Northern Wel-Bilt coal water pressure washer and have had no luck in finding out what manufacturer made these engines. Any advice? Thanks

@fleadoggreen9062 Год назад

Thanks I was wondering how to change the primer bulb

@larrylucas5731 5 месяцев назад

Been pulling my hair out about this issue. Thank you for the quick fix! Member for life.

@TLMD Год назад

I love this information brother. I am going to Chinazon right now to order me a Mr. Heat gun.....lol Great video Sir!

@RaleysSmallEngines Год назад

Lol Heck Yeah or just go steal your wife's hair dryer.... She won't mind LMAO Oh share pictures of the bruising when she throws it at you LOL

@gravelyman Год назад

Happy New Year Mr and Mrs T-Bone 🎉

@RaleysSmallEngines Год назад

Happy New Year my friend.

@shakes7333 3 месяца назад

I've bought several over the years from Amazon over the years and 9 x's out of 10 they are warped. lol

@jwayne777 5 месяцев назад

Raley😊you just blew my mind, thank you

@maradavila4400 Год назад

Thank you for this video. Very informative. ❤

@danielbrown9469 5 месяцев назад

Good video...thank you for posting this!

@jamesronnie8444 2 месяца назад

This is great stuff, my brother. Keep it up.

@David-j5w9e 5 месяцев назад

Government crap they need to make them with choke cables again

@philg4116 Год назад

According to RU-vid, my B&S mower engine is the only one in the world that has no primer bulb.

@gradyhernandez4699 29 дней назад

I need air filter for Troy Bilt 340 and the cover

@philliphall5198 Год назад

Happy New Year Be safe and happy 😆

@RaleysSmallEngines Год назад

Happy New Year

@williamfair Год назад

👍🏾

@beachwave2 6 месяцев назад

Thanks for the video. I have to push the red primer bulb about 8 x then my Toro mower starts . It used to work after just 3 pushes.I will try this .

@2manycatsforadime Год назад

My mower will start for a second on starting fuid but then stops. I put new gaskets, primer ball, cleaned and blew out the carb passages. No change, still will not run except to start on fluid but then dies. Briggs motor different carb that yours.

@RANS87IROCZ 5 месяцев назад

Clogged jet, Just fixed mine and it's #1 issue for them models

@RANS87IROCZ 5 месяцев назад

Even if different model most carbs have same jet set up

@firstlast2544 5 месяцев назад

Darn tootin good video brother

@Pete.Ty1 Год назад

👍👍👍 Wishing a happy healthy and prosperous New Year to you and your family.

@RaleysSmallEngines Год назад

Thank you, Happy New Year to you and your family also.

@tednugentlives Год назад

I have a 2008 toro recycler which I replaced the carb with the Chinese knock off. Starts on first pull, however if I shut off for more than 5 mins it won't start. Starts hot or cold , but not warm. Any ideas, a leaking cover gasket might be it? Or is there a choke thats messed up. No primer bulb its a toro 20066. It pulls easy, I heard there is a compression release, but cylinder wear is my concern. Advice?

@mrodriguez5259 Год назад

Very good ,thanks

@billshedd55 Год назад

"Slip it on my little tool"; that could be taken the wrong way!😂😂😂 I use an 18mm socket with no grinding.

@Edward-turtle Год назад

New subscriber, this helped alot cheers dude

@RaleysSmallEngines Год назад

Great!! Thank you

@kendostick 5 месяцев назад

The fuel line coming off the primer is missing I can't seem to find where to run it to fix the problem starts fine while putting fuel in carb until it runs out of fuel

@kendostick 5 месяцев назад

Motor is a 2015 brigs 300e have a 450e with the same issue both set since new used only a few times guessing fuel lines rotted trying to get one going for my brother in law

@phoenixMaxxOnShop 3 месяца назад

Chinazon or Fleebay 😂😂😂😅

@amosbeasley3438 Год назад

Ty so very much! With this videos help, I (not mechanically inclined at all) have fixed my mower. Again, ty.

@Mrs.T-bone 5 месяцев назад

So glad to help.

@jeffcantrell3944 Год назад

primer bulbs suck npt blow if blowing hooked up wrong

@beegekhaos3171 4 месяца назад

Ooo i like that intro clip! @ 29 seconds

@TheStevenc819 Год назад

I do like you

@ryanfrankum3493 Год назад

Hey that little hole in the carburetor I put gas in it don't come out the tube in the 3

@wynnpham631 5 месяцев назад

You are not cheap, Mr

@Orders-l3p 8 месяцев назад

Great video

@RaleysSmallEngines 8 месяцев назад

Thank you

@williammoore2417 4 месяца назад

You have the best videos on RU-vid.

@liljoeii6091 Год назад

Thank you for the video

@RaleysSmallEngines Год назад

You are welcome

@robcole332 5 месяцев назад

View 2 lol

@bob1519 Год назад

Great thx man really appreciate it

@bob1519 Год назад

You have a way of explaining things - it’s a gift brother keep up great work thx again

@RaleysSmallEngines Год назад

Wow, thanks brother

Далее

FIX Engine Surging on any small engine QUICKLY

16:03

FIX Engine Surging on any small engine QUICKLY

Просмотров 1,5 млн

How a Primer Bulb Works

8:02

How a Primer Bulb Works

Просмотров 73 тыс.

ЧЕСНОК + ЧОМПЕР = ИМБА! / ТАКОЙ ГИБРИД МОД Я ЕЩЁ НЕ ВИДЕЛ

00:41

ЧЕСНОК + ЧОМПЕР = ИМБА! / ТАКОЙ ГИБРИД МОД Я ЕЩЁ НЕ ВИДЕЛ

Просмотров 605 тыс.

открыли бесплатный магазин техники - все по 0 рублей ч4 - удивили мужика.

01:00

открыли бесплатный магазин техники - все по 0 рублей ч4 - удивили мужика.

Просмотров 353 тыс.

ЭТО НАСТОЯЩАЯ МАГИЯ😬😬😬

00:19

ЭТО НАСТОЯЩАЯ МАГИЯ😬😬😬

Просмотров 1,7 млн

00:16

Просмотров 584 тыс.

Lawnmower Only Starts With Starting Fluid! Step By Step Repair!

8:00

Lawnmower Only Starts With Starting Fluid! Step By Step Repair!

Просмотров 162 тыс.

Craftsman Lawn Mower With Priming Issue

13:40

Craftsman Lawn Mower With Priming Issue

Просмотров 20 тыс.

Weedeater 101 - The two most common reasons for failure to start.

15:16

Weedeater 101 - The two most common reasons for failure to start.

Просмотров 471 тыс.

TRY THIS TRICK to get your lawnmower started after sitting! Briggs Troybilt spring start up guide

10:06

TRY THIS TRICK to get your lawnmower started after sitting! Briggs Troybilt spring start up guide

Просмотров 1 млн

How I fixed a primer base that wouldn't prime. (quantum Briggs)

12:32

How I fixed a primer base that wouldn't prime. (quantum Briggs)

Просмотров 22 тыс.

push mower wont start or stay running after starting fluid, spring mower maintenance.

16:27

push mower wont start or stay running after starting fluid, spring mower maintenance.

Просмотров 4,4 тыс.

Briggs & Stratton 5-6hp Engine |Carburetor Primer Bulb Plate Fix When 2 Gaskets Don't Work(Updated)

28:45

Briggs & Stratton 5-6hp Engine |Carburetor Primer Bulb Plate Fix When 2 Gaskets Don't Work(Updated)

Просмотров 14 тыс.

Free Smoking Lawn Mower - Not an Engine Issue

33:49

Free Smoking Lawn Mower - Not an Engine Issue

Просмотров 450 тыс.

Stop Your Engine Surging! (Easy DIY Tutorial!)

11:53

Stop Your Engine Surging! (Easy DIY Tutorial!)

Просмотров 276 тыс.

Fixing An Ariens Mower That Won't Start When Hot

12:10

Fixing An Ariens Mower That Won't Start When Hot

Просмотров 13 тыс.

ЧЕСНОК + ЧОМПЕР = ИМБА! / ТАКОЙ ГИБРИД МОД Я ЕЩЁ НЕ ВИДЕЛ

00:41

ЧЕСНОК + ЧОМПЕР = ИМБА! / ТАКОЙ ГИБРИД МОД Я ЕЩЁ НЕ ВИДЕЛ

Просмотров 605 тыс.