Easy Thin Strip Jig For Your Table Saw!

Подписаться 12 тыс.

Просмотров 149 тыс.

50% 1

With this Thin Strip Jig idea anyone can greatly speed up the process of producing all the thin strips you need!
👇👇👇👇👇👇👇👇👇👇👇👇👇👇
The project that involves 1000 pieces is finally done! Clink on the following link to check it out - • Amazing Woodworking Pr...
👆👆👆👆👆👆👆👆👆👆👆👆👆👆
The previous video I made on another Thin Strip Jig option - • Easy Thin Strip Jig Fo...
And as I said in the video I got the idea from Colin Knecht's channel WoodWorkWeb.
Link to his video - • How to Make a Thin Str...
---------------------------------------------------
If you would like to buy me a coffee as a way to support my channel click the link below.
www.buymeacoffee.com/ltdwoodw...
--------------------------------------------------
Subscribe to my channel - / @ltdwoodworks
My Woodworking videos playlist -
• Woodworking Projects
------------------------------------------------------
Tools, Supplies and Camera Gear Used
FocusFoto Smartphone Video Rig - amzn.to/2SslDeL
Diabo by Freud D1060X 10" x 60 Tooth Fine Finish Saw Blade - amzn.to/2T6CnY2
DEWALT 20V MAX Cordless Drill Combo - amzn.to/2PbJAoJ
The above links are affiliate links which means if you purchase anything through the links I will receive a small commission but there is NO extra charge to you. Just a small way to support my woodworking:)
---------------------------------------------
Now selling Woodworking Themed T-shirts of all kinds! New designs added all the time. If interested visit -
teespring.com/stores/ltd-wood...
--------------------------------------------
Instagram - / ltdwoodworks1
Website - Ltdwoodworks.com
Facebook - / ltdwoodworks

Хобби

Опубликовано:

20 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 224

@lskanon863 Год назад

Thank you for sharing your knowledge. Very much appreciated.

@LTDWoodworks Год назад

You’re welcome and thanks for watching!👍

@user-dp6cc7km5j 3 года назад

Very useful! Just finished sawing wenge . The result is great! Thank you very much!

@LTDWoodworks 3 года назад

Glad I could help. Thanks for watching!

@joshuameltzer3761 3 года назад

Of all the videos I watched on thin strips jigs, this one is the simplest and most effective-way to "keep it simple stupid" and not overthink it. I made a series of them 1/8, 1/4", etc... Thank you!

@LTDWoodworks 3 года назад

Glad you enjoyed it and thanks for watching!

@lucyanneanne5411 10 месяцев назад

Brilliant so easy. Cheers

@williamkaiser8490 8 месяцев назад

Simple and Ingenious! Thanks!

@LTDWoodworks 8 месяцев назад

You're welcome!

@WhiteLabWorkshop 4 года назад

That is such a simple setup to gain a ton of efficiency!

@LTDWoodworks 4 года назад

Thanks! Any day now I'll start putting it to the test cutting up over 200 strips👍😬

@whomadethatsaltysoup 3 года назад

Excellent tutorial! Super easy jig, and a accurate, safe and repeatable method for cutting thin strips. There is no such thing as cheating! Anything that makes life in the workshop easier and safer, needs no apology 👍

@LTDWoodworks 3 года назад

Thank you and thanks for watching!👍

@nitestrike1000 5 месяцев назад

This is so easy, its genius 👏

@johngunning2123 3 года назад

Great idea!

@LTDWoodworks 3 года назад

Thanks! It works great but lately I've been thinking I may make another one that's not so big and clunky. Thanks for watching!

@keithdavison5578 3 месяца назад

That's incredible once you know how thank you very much I'll give it a go very helpful

@hansdegroot8549 3 года назад

I saw Colin Knechts video about one year ago. And I made a jig according to that with some (minor) changes. It works quite OK. Not perfect because I didn't make it enough precisely. This winter I'm going to make a better version. Thanks for sharing the video. it is a good reminder for me.

@LTDWoodworks 3 года назад

No problem 👍 Thanks for watching!

@leonardnoel888 7 месяцев назад

Very good. I really like it. Tanks you.

@veritastruth9456 3 года назад

Thanks for this video!! You are awesome.

@LTDWoodworks 3 года назад

Thank you and thanks for watching!

@AndyCPugh 4 года назад

1000 strips! Looking forward to that.

@LTDWoodworks 4 года назад

Technically a certain amount of strips that will be cut into 1000 pieces 👍

@user-ci9xv6kx8y 4 года назад

Thank you for the video! 👍👍👍

@LTDWoodworks 4 года назад

You’re welcome and thanks for watching!👍

@aramoramo923 3 года назад

Wow superb

@LTDWoodworks 3 года назад

Thank you! Cheers!

@m.bh.535 Год назад

easy and fast. Thank you for this vedio.

@LTDWoodworks Год назад

Most welcome 😊

@m.bh.535 Год назад

realy it is the faster method that I ever saw to get a lot of srips with the same thikness. Thanks a lot for this video.

@LTDWoodworks Год назад

You are most welcome and thanks for watching!

@Dutchshedwoodshop 4 года назад

Awesome. Great idea buddy!

@LTDWoodworks 4 года назад

Thank you and thanks for watching!👍

@TheGrantAlexander 4 года назад

That looks like a much better design! 👍

@LTDWoodworks 4 года назад

Yep, as I've said before it's ugly but works great!👍

@PinetopJackson 4 года назад

Great idea! I'm a pretty amateur woodworker myself...I recently bought a used table saw, and I'm just amazed at the possibilities it opens up!

@LTDWoodworks 4 года назад

Thank you! The world of woodworking itself has endless possibilities. It’s up to all of us to try and find them😊👍

@billcorwin3316 7 месяцев назад

Way too dangerous

@mohamedgareb5949 3 года назад

Wow really smart i like it

@LTDWoodworks 3 года назад

Thank you!

@madjayhawk 4 года назад

Great video. You have some very nice tools.

@LTDWoodworks 4 года назад

Thank you! And I’m still collecting. He who dies with the most tools, wins!😆

@danieldibiaso9342 3 года назад

I’ve seen a few jigs like yours and if I can make a suggestion. The piece you screwed on the back to hold the stock if you use a piece that is higher than the stock you are cutting and extend it farther out it will not only push the piece you want to cut but will also push the entire piece of stock reducing any kickback.

@LTDWoodworks 3 года назад

Thanks for the suggestion. Definitely worth a try👍

@misterfee6467 2 года назад

Or puch it into the back of the blade?

@DeanMakes 4 года назад

That's really cool, I need to rip a few thin strips for my next project so I may steal this idea ✌️

@LTDWoodworks 4 года назад

Go for it! It's supper easy to make and use👍

@kemokemolino6532 Год назад

Thank you

@LTDWoodworks Год назад

You’re welcome

@karlpopewoodcraft 4 года назад

I'm 100% making this push stick, I'm always making thin cuts and struggling through the process. Thanks for sharing this great solution.

@LTDWoodworks 4 года назад

Definitely do. It's well worth the time to make it👍

@ryanpinkham6784 2 года назад

Now this, is a simple jig!

@LTDWoodworks 2 года назад

Yep, and it works great! I’m still thinking of making a better one though with some better features. Stay tuned 👍

@GrumpysWorkshop4 4 года назад

Great jig

@LTDWoodworks 4 года назад

Thank you! It's ugly but it works!👍

@heyimamaker 4 года назад

I like this one, if I never need some thin strips I know whos jig I will use!

@LTDWoodworks 4 года назад

Thanks and thanks for watching!👍

@berryconway4296 3 года назад

Beats the jig I've been using. Thks

@LTDWoodworks 3 года назад

No problem, thanks for watching 👍

@musicbymark 4 года назад

Very good method - probably w/ more consistent thickness results than other thin strip jigs I've built where you have to snug the fence up to the jig's wheel/index every cut as the stock gets smaller. However, the thick beam/handle and solid 3"x 3" or 4" x 4" is quite heavy, and using SOLID stock isn't necessary. I think will modify the design by making a hollow version of the 3x3" or 4"x4" --i.e., just using 2 pieces of 1/2" (3/4" max) plywood w/ spacer/support (forming an upside down "U"). Of course accurately jointing this U-box before assembly will be critical. I'm pondering yet another variation where the push stick/jig rides on the fence. Thanks for video.

@LTDWoodworks 4 года назад

Totally agree that this type of jig doesn't have to be so solid. I have a tendency to use what I have laying around so that I can put it together quickly. My shop time is VERY limited so this one was very quick to throw together. I can see my self making a lighter version one day down the road. But hey, it was a great work out!😉 I also think that the base doesn't need to be tall at all. Just sturdy to hold the back support piece is probably all that's needed which I believe is what you are saying. Hope to see your version one day. Thanks for watching!

@johnh2o1 3 года назад

That will definitely be less setup between cuts but you can only cut short strips, the other jig will cut any size. Looks like I may need this jig too, thanks for sharing

@LTDWoodworks 3 года назад

Very true. If I remember right this one will do around 18 to 20 inches safety. Beyond that you would have to go the other route. Thanks for watching!

@MCsCreations 3 года назад

I've used that background music before in my videos... Some people don't like it, but I find it pretty fun! 😊 Anyway, fantastic jig, dude! Thanks a lot! 😃 Stay safe there with your family! 🖖😊

@LTDWoodworks 3 года назад

Ya, I find as well that you can't please everyone when it comes to music. Oh well... Thanks for watching!

@mohaimenkazi9787 3 года назад

thumbs up for the idea and subscribed because the dog! :D

@LTDWoodworks 3 года назад

Excellent reason to subscribe! Thank you!

@KirstiePervinDavies 4 года назад

This is one thing I’ve always never enjoyed doing. Cutting thin strips for splines. Always trial are error to get the right fit. Nice video ✌🏻😃

@LTDWoodworks 4 года назад

Thank you, about to put it to use starting the big project I mentioned. Strips, strips everywhere!

@KirstiePervinDavies 4 года назад

LTD Woodworks look forward to seeing it! 🙌🏻

@lincolndickerson1293 Год назад

Nice jig

@LTDWoodworks Год назад

Thank you and thanks for watching!

4 года назад

Hello my friend. Great idea to cut strip wood in a table saw. I watched with curiosity. It's nice to create and share a variety of ideas to help many people. Congratulations ... I wish you a nice weekend. Great greetings...

@LTDWoodworks 4 года назад

Thank you and stay tuned for a big project coming soon.

@tuckersfuntime4050 2 месяца назад

gooood job Dad from Tucker

@mrupholsteryman 3 года назад

Congrats on the shoutout! Christofix sent me! 😀😇😎

@LTDWoodworks 3 года назад

Thanks! Ya, awesome channel Chris has👍 Thanks for watching!

@EdvanioSilva 4 года назад

Great! The only limit maybe is to cut long strips. Thanks for sharing ideas.

@LTDWoodworks 4 года назад

True, I would say this is definitely for shorter strips. Thanks for watching 👍

@DIYNauticalDream День назад

@LTDWoodworks how would you make one for long strips? We are planning to re saw lots of long teak strips for a teak deck on our sailboat.

@LastLeafStudioVideo 4 года назад

Now that's how you do it.

@LTDWoodworks 4 года назад

Ya buddy, it works great!

@LonghornWorkshop 4 года назад

Cool, I think you are going to cover the whole wall with the 1,000,000 strips...;0) It’s great that you gave a shout out to Collin...

@LTDWoodworks 4 года назад

Ok, let's not get crazy with 1,000,000 strips!😳 And yes, got to give credit where credit is due 👍

@richardbragg8161 Год назад

thats good and all for short pieces,but what about 4 to 6 ft boards?

@2drsdan Год назад

If you used a larger tail hook piece made from Baltic birch ply that is above the blade to provide support, it becomes a mini sled kinda. And then safer as well.

@Itmovesme1 3 месяца назад

great idea, i'm going to use it..

@someguynj 2 года назад

Nice idea. Only thing that catches my attention is that since you need to hold both sides to keep the stock from slipping to the left, it forces you to be directly behind the blade in the path of any kickback. I feel like a 1 sided sled with a stop block would be safer, right?

@LTDWoodworks 2 года назад

I think in general you're right. Standing directly behind what you're cutting should be avoided whenever possible. The table saw is always a challenging tool to be safe around. I think even a two sided sled would work just fine as well but I think I might try a one sided version like you say. Thanks for the idea👍

@SusanHCooper 3 года назад

I love how these videos show you how to "save money" making a DIY product in a workshop full of $1000 + tools..

@LTDWoodworks 3 года назад

So, just because someone has lots of expensive tools this means they can't try to save money? Maybe this person is trying very hard to build a business and put money where it is most important. Maybe saving money on a simple jig like this has allowed someone to save enough money to purchase better and more expensive tools. Maybe this person is trying to help others that don't have the money to buy certain things needed to do a job. I'm not sure if I'm miss reading your comment or not, but it "sounds" like a snide comment. So, if I'm right in how I'm reading your comment I would say I love how someone could leave a comment like yours when they obviously have no clue on someone else's background or reason to make a video like this. I would say that if you don't have anything nice to say then don't say anything at all. If I did in fact miss read your comment, you have my apologies. Otherwise, next time just move on.

@SusanHCooper 3 года назад

@@LTDWoodworks I wasn't trying to offend you, as I loved what you made! Unfortunately, I can't use your instructions.. Most DIYers on youtube looking for help, are similar to me.. Beginners who are starting out w a limited number of woodworking tools...I love it, but don't have the tools to make it .

@philippe5518 4 года назад

Great jig! Beats having to move the fence every time. Can I offer one possible improvement? After you push the wood through the blade you had to reach a long way forward to get that thin strip of wood to clear the blade out the back of the saw. It seems to me that if you set your offset halfway on the jig rather than right at the back you would not have to lean so far over the blade.

@LTDWoodworks 4 года назад

Thank you! Yes, reaching over the blade is something I never like to do. The shots in this video are actually the very first time using the jig. Now that I have used it a lot ( watch the 1000 piece cutting board video 😉 ), I now just let the pieces fall since I don't have an out feed table yet. For real short strips I think your idea might work just fine. I may have to experiment and give that a try. Thanks for watching!

@philippe5518 4 года назад

@@LTDWoodworks I was thinking about this today as well, an easier fix might be to extend your grip/handle back towards yourself. It would then work somewhat like a push-stick. I did watch the 1000 piece cutting board video, I would not have the patience. It turned out great, I liked the pattern.

@LTDWoodworks 4 года назад

This is why I like the RU-vid world, everyone has great ideas! Thanks again for watching!

@homesformeremortals5935 Год назад

Simple jig.

@LTDWoodworks Год назад

Yep! Thanks for watching!

@eddaeges9309 2 года назад

I need to make 36 - 40 inch 1/8 - 1/4 pieces. Any tips for cutting long lengths like ?

@b1j 3 месяца назад

I’d prefer to square up the right side (against the fence) with the bottom of the push block to avoid left/right wobble.

@Itmovesme1 3 месяца назад

show me a video of how you do that other wise i'm going to try this.

@gwheyduke 3 года назад

This is a great method. I"m trying to cut a lot of 3/16 inch irregular shapes that don't have a flat bottom. Any suggestions, maybe something similar to what you did in this one

@LTDWoodworks 3 года назад

Well, I think I would have to see what you are actually cutting 🤔 Any way to make a flat edge or are you trying to keep the irregular shape? Maybe a bandsaw would be better for your situation? Or you could email me some pictures and we could decide from there.

@gwheyduke 2 года назад

@@LTDWoodworks I'm cutting out "wings" for whirligigs

@MCsCreations 3 года назад

BTW, take care with Cody... He shoot at Obi-Wan and he was his friend as well! 😬

@freewoodencrosses 2 месяца назад

Great idea, but my thin strips are often 18 inches long. I would need a jig over 18 inches long... , maybe 24 inch.....????

@JustMightDIY 4 года назад

Another great jig! Now I'm really curious as to what you'll need 1,000 thin strips for... 🤔😉

@LTDWoodworks 4 года назад

Well you'll just have to wait and see 😉 Admittedly I'm nervous that it will turn out ok. But we'll see!😀

@JustMightDIY 4 года назад

@@LTDWoodworks Seriously can't wait to see what you do - already know it'll be an epic build. 😀

@LTDWoodworks 4 года назад

@@JustMightDIY Think small but epic😉

@JustMightDIY 4 года назад

@@LTDWoodworks I ❤️epic!

@richardthoming3418 2 года назад

Great Vid! Is there a jig to split 5.5 redwood fence boards down the middle to make two thin boards?

@LTDWoodworks 2 года назад

I assume you mean making each board roughly a 1/4” thick by 5.5” wide because my guess is the board is about a 1/2” thick to begin with? If so, do you have a bandsaw with a fence? That’s probably what I would use. The use of a table saw can be done but would not be as safe.

@thecelt4807 9 месяцев назад

i need this exactly but my problem is i need a set up where the max height for wood im using is up to 140 or 150 mm in height strips any ideas for set up as most tables that i know are 12 inch and dont give me enough vertical height for the strips i need ..anyone ?

@oldmarine312 3 года назад

Did you consider making the stop block you cut off, a sliding stop block so you can cut different thickness of strips?

@LTDWoodworks 3 года назад

I have👍 I think in the future I’m going to make a new and improved version. I threw this version together pretty quick as I had a deadline to meet at that time. Thanks for watching!👍

@charleslipham3172 3 года назад

How effective would this be for resawing a board to make thin strips for an edge grain cutting board

@LTDWoodworks 3 года назад

I would say very effective since that’s exactly why I made this jig👍 Check out my other video on my 1000 piece cutting board 👍

@trevenmaharg1585 3 года назад

Hey, I just bought a dewalt 7491rs and was wondering if you recommend thin kerf or full kerf for cutting and ripping hardwood. Thanks

@LTDWoodworks 3 года назад

I personally use any of the Freud blades. In my experience they work great and are way less expensive then some "high end" blades like Forest blades. Thanks for watching!

@slavneslavne 7 месяцев назад

All fine, but use a planer push block to press the workpiece towards the saw blade. BTW I don't understand why people are so indifferent with simple security precautions.

@b1j 3 месяца назад

On a band saw a jig like this would make less waste.

@billhaughenberry2917 2 года назад

Morning, nice job looks like he can rip out some nice strips with that, I am wanting some thing that you can make different sizes I guess you could always just put a shim between the push block and the fence and remove them when you need a different size? Question for you though I watched you run that piece of scrap through your jointer but when you placed it up against your fence to do the initial cut off of the excess it appeared in the video that there was a rather large gap at the top which would indicate to me that either your jointer fence is off out of square or your tablesaw fence is out? Just an observation could be a obstacle illusions. Anyway thanks for the great idea.

@LTDWoodworks 2 года назад

Thank you! If I remember right, it was probably the jointer. That old jointer was not very good. I have since sold it as it wouldn't hold square very well and got a better one. Nice and square now👍 I've been meaning to get around to making a better one that is lighter and better built. So many things to build and so little time. Oh well... Thanks for watching👍

@trippinballs101 Год назад

Are there jigs that will work on band saw

@LTDWoodworks Год назад

The only "jig" I use so far on mine is a fence I made out of plywood. This would work just fine for cutting thin strips on the band saw. Just set your thickness and push the wood through with a scrap piece of wood to protect your fingers. Good to go! Thanks for watching!

@johnimming8009 2 года назад

I am assuming if you want to cut 1/8” and 1/4” strips you would need to build x2 separate jigs or add a new piece on the back each time?

@LTDWoodworks 2 года назад

Nope, the back piece sticking out only an 1/8” should still push just about any thickness above the 1/8”. It’s really just there to push the wood. Another thought which I would like to do it make an adjustable piece in the back that would slide out more when needed.

@jwill9877 3 года назад

Plantation shutters is my guess

@LTDWoodworks 3 года назад

Great answer but no. It was for my 1000 piece cutting board I made for when I reached 1000 subscribers on RU-vid. Check out that video👍 Thanks for watching!

@sreejeshkv918 3 года назад

How to cut long thin pieces

@doycebrimmage6865 3 года назад

Great for short stock...what about longer stock?

@LTDWoodworks 3 года назад

Ya, this one is only good for around 20". I would use this method for longer stock. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HLH3o91II4A.html

@davidbruce5377 2 года назад

Hi, Cody!! Sir, I need to re-saw (Mahogany) 10 foot plus, rough 2 x 6, into finished 1 x 6 for decking purposes. Question, after the jointer, what blade should I use in the table saw? P.S i have a thickness planer; can you suggest a process, that utilizes the mentioned equipment? FYI, I'm in The Philippines.

@LTDWoodworks 2 года назад

Hi! For the blade on your table saw I typically use a Freud name brand 10" thin kerf rip saw blade. There's better blades but for the price and for the amount of work that I do, these work great. For your process I would probably rip them just a bit thicker than what you need. Then run them through your thicknesser to the correct thickness. All being sure to run both sides of the piece so both sides are nice and flat. Hope that makes sense and helps. Let me know if you have any further questions.

@frankrodriguez6424 Год назад

Delta T1 right! Best table saw. Surprised u have not upgraded the fence

@LTDWoodworks Год назад

It is! I'll have to look into that. My fence does pretty well so it hasn't been a real concern. But always looking to make things better so I'll see what's available. Thanks!

@rwe2156 Год назад

Kumiko😊

@LTDWoodworks Год назад

Nice guess👍 But no, is was a 1000 piece cutting board. Check out that video 👍

@Cavalier666 9 месяцев назад

I'm guessing parquetry flooring.

@khinrichs01 3 года назад

I think you are going to be building OSB strand board. Right? Like the channel.

@LTDWoodworks 3 года назад

Not quite, it was for a 1000 piece cutting board 👍

@phaedruscj3330 Год назад

The link to the previous video links to this video :)

@Tal.10 3 года назад

Sorry for the stupid question, i'm new to woodworking, Why can't we just put our fence at the right thickness & cut the strips using only the fence as a guide? Thanks for your great video

@LTDWoodworks 3 года назад

No worries! Doing the method you describe would have a greater risk of getting the cut piece pinched between the blade and the fence. So after it's cut free it could get shot back at you at a million miles an hour. Not good! So basically the method in my video is MUCH safer👍 Thanks for watching👍

@Tal.10 3 года назад

@@LTDWoodworks Thanks a lot 👍

@SonofDaVinci4 2 года назад

Great jig! Also, I noticed your excellent platform set up for your drill press. I'm going to adopt (steal actually) this design for mine and my Dad's! Will credit you and show your video to him. He's going to love it. Going to use knobs instead since his hands are getting pretty bad.

@LTDWoodworks 2 года назад

Thanks! For the drill press table I have actually built a new one that works much better! Be sure to check out my build video on it. It has T-Tracks with knob operated hold downs for the work pieces so you can be hands free. And it has built it dust collection! Thanks for watching!

@Timber81 3 года назад

Your making a strip wood boat?

@juanitanewman1079 3 года назад

What happens if you want a piece of thin strip around 16 to 20 inches long

@LTDWoodworks 3 года назад

I would think that this jig would work for something that long. You would just be starting the jig with your cut piece farther back while still resting up against your table saw fence. Or you would just have to make a longer jig. That does make me think that I'll verify the longest length that this current jig would cut safely. So I'll check and let you know👍

@LTDWoodworks 3 года назад

Yep, just check. The total length of me jig is around 17.25" so it would handle up around 20" long strips just fine👍

@aaronreed8402 3 года назад

Ok I feel like an idiot deluxe for not thinking of this simple jig. What a great and much safer idea than what I was doing. Thanks for sharing!

@LTDWoodworks 3 года назад

Ha, well this is what RU-vid is for. Sharing ideas such as this. Thanks for watching!

@Enceladus_edits Год назад

That’s cool if your strips are 1’ long

@DamianDArienzo Год назад

I would have gone with Kumiko....

@LTDWoodworks Год назад

Good guess! Guess you've now seen what I actually made with it? If not, it was a 1000 piece cutting board. Thanks for watching!

@poultonprojects 4 года назад

Canoe 🛶??

@LTDWoodworks 4 года назад

Ha, no. That would be a cool project one day though!👍 Try again!😉

@k1ngN0rk 3 года назад

What machine is that at 01:19 ? Thanks

@LTDWoodworks 3 года назад

That was my older Delta wood jointer. I sold that one to get a slightly bigger one though. It makes a flat surface along one edge of wood. If you have any other questions just let me know. Thanks for watching!

@GK-ee7mw 10 дней назад

Curious why you couldn’t just set your fence at that thin distance from the blade and run your piece along the fence?

@LTDWoodworks 10 дней назад

It’s because it’s not easy or safe to push a thin piece past the blade. If you were to just push the main piece through the blade and once the thin piece is free of the main portion it would stop between the spinning blade and the fence. While it’s stopped there it also as a HIGH chance of being shot back towards you if you’re standing behind the blade (which you should try not to do anyways). So, this method is also about safety. Hope this makes sense.

@GK-ee7mw 10 дней назад

Thanks for the reply. Yeah I guess that does make sense. Could you also put a stop block against the fence and use the miter gauge? That way you’re repeatable and accurate but the thin off cut isn’t binding ?

@LTDWoodworks 10 дней назад

@@GK-ee7mw Yep, I think that would work just fine 👍

@woodworker5468 8 месяцев назад

I’m guessing a lattice fence

@LTDWoodworks 8 месяцев назад

Nope, it was for a 1000 piece cutting board I did for reaching 1000 subscribers. Check out the video if ya want 👍

@Timber81 3 года назад

I have built 12 strip wood canoes an kayaks if you need help!

@LTDWoodworks 3 года назад

That would be a much future project for me but a very cool one👍 The project I made with this jig was a 1000 piece cutting board. Check out the video!👍

@myscreennameis 7 месяцев назад

This maybe a silly question, but, do you ever get worried that the strings from your hoodie will somehow get caught?

@Itmovesme1 3 месяца назад

but what did you think of the jig, i mean isn't that the reason we're all here...

@adamthewoodworker2571 2 года назад

Hi. What's the thinnest piece of wood strip you could produce on the table saw? I need to get 1/32inch and 1/64inch strips and wanted to see if you thought it would be possible to cut strips that thin on the table saw

@LTDWoodworks 2 года назад

Well I personally have no experience cutting anything less then around an 1/8". My opinion is that when you start going much less then say 1/16" the wood would loose it's stability. 1/32 and 1/64 is incredibly thin. Yes, that's the range that most wood veneers are made but I'm not sure of the process to get it that thin. So, it might be interesting to try. But with my saw not being a high end saw I would worry that when trying that thin just pushing the work piece thru the blade would cause the work piece to "rock" slightly side to side. Now I'm only thinking it would "rock" side to side by a 1/32 or so but that would be an issue when working this thin. Basically causing inconsistencies in the wood. Maybe a combo of a table saw and a drum sander would be best. Of course only if you had a drum sander as well.

@GregMorphis 3 года назад

That's an awesome idea, but if you have to cut 999 times to get 1000 pieces and your kerf size is .125 (1/8"), that's a lot of saw dust (waste).

@LTDWoodworks 3 года назад

Yep, you’re absolutely right. But the table saw blade leaves a much smoother surface as opposed to a band saw blade. I didn’t want to have to sand all that much. It was a one off project so oh well.

@GregMorphis 3 года назад

@@LTDWoodworks I watched that following this, that was pretty slick, 1000 piece cutting board. I'm a hobbyist and just getting into woodwork so I don't know all the ins and outs and don't own all the gear, just watching some videos to get some ideas. Take care!

@LTDWoodworks 3 года назад

Sounds good. Let me know if you ever have any questions. Thanks for watching!👍

@thistledownwoodcraft3426 8 месяцев назад

Kumiko

@avoidtheherd7066 6 месяцев назад

1000 thin strips? Kumiko?

@LTDWoodworks 6 месяцев назад

Nice guess. It was for a 1000 piece cutting board that I made to celebrate reaching 1000 subscribers. Check out the video 👍 Thanks for watching 👍

@useffrance519 3 года назад

Hi Mr. how are you? please give me full size of tow wood Piece?

@LTDWoodworks 3 года назад

Êtes vous Français? Si oui, je n'ai pas compris votre question? Peux-tu réessayer?

@useffrance519 3 года назад

@@LTDWoodworks Merci pour la réponse, non je ne suis pas français mais j'aime la france Je veux me dire, quelle est la taille réelle du morceau de bois de remorquage que vous êtes habitué à ce gabarit? votre taille de gabarit en bois? Merci

@LTDWoodworks 3 года назад

The main base wood is 17" (43.18cm) long, 3"(7.62cm) wide, 3.25"(8.255cm) tall. The small piece on the back is 3"(7.62cm) wide by 2.25"(5.715cm) tall. It sticks out from the base .25" (.635cm). Hope this helps!

@useffrance519 3 года назад

@@LTDWoodworks Thanks very much

@qvo3426 3 года назад

A wooden armor suit lol

@LTDWoodworks 3 года назад

That would be awesome! Great answer 👍 It was for the 1000 piece cutting board so check out that video too!👍

@qvo3426 3 года назад

@@LTDWoodworks Right after submitting my answer I seen the link to the finished project pretty badass cutting board

@LTDWoodworks 3 года назад

@@qvo3426 Thank you!

@jimwakelin6968 3 года назад

Watch your fingers. I know. I lost one

@LTDWoodworks 3 года назад

Yes, the table saw is definitely the most dangerous tool in the shop. I "try" to be aware of what I'm doing at all times by using what I call the most important tool in the shop which is the brain. I will never say that it (brain) gets used like it's supposed to but I at least try. A SawStop Saw is on my list. This will at the very least help when my brain doesn't work and I do something very stupid. Stay safe everyone!

@jimwakelin6968 3 года назад

@@LTDWoodworks I just ordered my SawStop this week. It will be shipped in 40 days

@LTDWoodworks 3 года назад

Nice! Did you order mine too?! When should I expect it?!😉😆

@paulusx11 4 года назад

Why the piece of wood at the end when all u do is cut it off??

@LTDWoodworks 4 года назад

That’s just where it’s being cut to size for the thickness of strip that I was going to cut.

@LTDWoodworks 4 года назад

It still sticks out 1/8” in my case. It’s not flush with the large piece of wood.

@paulusx11 4 года назад

So its not really needed?

@LTDWoodworks 4 года назад

It is needed. That 1/8" of wood that sticks out in my case is actually what pushes the wood thru as you are pushing the whole jig. 1/8" because that's how thick the thin strips I wanted were. If it was not there or just flush there would be nothing to push the wood forward. Hope that helps.

@assortedmountainlife 3 года назад

Why would you move your fence with each cut without the jig? Isn't your work piece supposed to be against the fence?

@LTDWoodworks 3 года назад

That’s the point of this jig. It’s so you don’t have to move the fence each time. This way the cut pieces are exactly the same width every cut. This jig acts as the fence, it just moves as you cut. Hope that makes sense. Thanks for watching 👍

@assortedmountainlife 3 года назад

@@LTDWoodworks Thanks for the reply. I mean though wouldn't your fence stay in the same place (say 1/8") if your work piece is between the fence and blade? then you keep cutting new strips from the discard piece. The problem would just be in pushing it through. Maybe it's not possible without the jig?

@assortedmountainlife 3 года назад

I'm trying to cut 1/2" x 1 1/2" strips from a 2x4. It will be fine with just a push stick until I get to a square input piece of wood. Then there may be a tendency for it to flip over. What kind of jig would you suggest for that?

@LTDWoodworks 3 года назад

Ah, gotcha. In that scenario I would say that's too dangerous. Trying to push a 1/8" thick piece of wood pass the blade would just be too hard even with a push stick, etc.

@LTDWoodworks 3 года назад

First question would be how long of a piece are you try to cut as well? I would say the one issue with the jig in this video is the length of a cut that it can safely make. It's around 17" to 20" max. For me I would say that if your total length is longer and the thickness is your 1/2" thick by 1 1/2" thick, it would be ok to use just your fence with a push stick. So no jig needed. If the length happens to be shorter than the 20" then using the jig would be a safer route to go.

@bradcross5981 3 года назад

1000 pieces? Strip wood canoe?

@LTDWoodworks 3 года назад

Nope, that’s a popular guess though. Check out my other video on the 1000 piece cutting board 👍

@lorenelkin9415 3 года назад

1000 pieces for a trellis???

@LTDWoodworks 3 года назад

Nope, good guess. They were for a 1000 piece cutting board. Check out my other video on its build👍 Thanks for watching!

@kryptik0 3 года назад

This seems rather dangerous with a real possibility of pinching the blade. If you are a beginner, don't attempt this.

@hansdegroot8549 3 года назад

Not true. I made it according Collin Knecht's video as well. Even before I had a real table saw (only an upside down circular saw that time) Now I have a table saw and I already used it some times on it. I consider myself as a beginner on the table saw. I don't have a zero-clearance insert plate yet but I covered the gap with duct tape.