Тёмный
No video :(

Easy to Make DIY Hot Wheels Display Idea 

Jk Canvas
Подписаться 4,3 тыс.
Просмотров 135 тыс.
50% 1

In this video I make a 100 space Hot Wheels display out of Poplar and 1/8 plywood. This is an easy weekend project you can do with minimal tools. I used some 4/4 poplar left over from a previous project that I milled down, however if you do not have a planer you can purchase s4s material from your local big box store.
I had a lot of fun making this and you will too.
Below are links to my Amazon Associate and make a commission on items purchased when using these links.
Building a Story Brand, By Donald Miller
amzn.to/2U6Grev
Making Time, By Bob Clagett
amzn.to/2TWG95m
Relitec Positioning Squares
amzn.to/30NZxG5
Feiyang Miter Springs
amzn.to/2umXm09
Bora WTX 5 Pc Clamp edge saw set
amzn.to/2VYZojb
Bora 24" Parallel Clamps
amzn.to/2JxBKDK
GoPro Hero 5 Black
amzn.to/2IuAliu
MicroJig GRR-RIPPER
amzn.to/2S1xUs4
25 ft Milwaukee Tape Measure
amzn.to/2t7Tn3I
Rigid Cordless Set
amzn.to/2Dn1i4m
Kreg Jig
amzn.to/2JHRp1y
Titebond II
amzn.to/2z0f2OP
amzn.to/2DmGNF2
Knipex Pliers
amzn.to/2Qi3gpj
Saw Blade
amzn.to/2QklLJK
EDC Pouch
amzn.to/2yQOhMG
DISCLAIMER: Woodworking and the use of power and hand tools can be extremely dangerous. You are responsible for understanding the safe use of your tools and techniques. Your safety is YOUR responsibility, I accept NO responsibility or liability for any injuries, accidents, death occurring to you or others if you attempt to do the things that I do or use advice that I give.

Опубликовано:

 

22 янв 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 223   
@LadysCustomCreations
@LadysCustomCreations 4 года назад
Its awesome Ty for the vid
@JkCanvas
@JkCanvas 4 года назад
You are very welcome. Thank you for watching.
@petebutler5139
@petebutler5139 3 года назад
“It’s really easy, and you can do it with just your basic hand tools” says the guy with a workshop and tools that rival The Bat Cave! 😜
@user-hx3nw3vj8m
@user-hx3nw3vj8m 4 месяца назад
My thoughts exactly 😢
@silverfox2183
@silverfox2183 4 года назад
"Basic hand tools"? Chop saw maybe... but a Table saw? A Planer? Corner clamps? 8+ hand clamps? Router table? Thanks for the "basic hand tools" version...
@jayc1716
@jayc1716 4 года назад
Basic to him 😂 us poor folks have to use hand tools lol
@PlaYzDiecast
@PlaYzDiecast 3 года назад
What I was thinking
@ultraman8862
@ultraman8862 3 года назад
Exactly
@Goobskers
@Goobskers 3 года назад
@Northeast Texas Gardener those are all basic tools you knew what they were didn’t you? Just Bc your to broke to afford it doesn’t make it not basic...............
@Goobskers
@Goobskers 3 года назад
@Northeast Texas Gardener ok first of all a “Lear jet” to people who know planes it is a basic jet there not even consider a “high end jet” and they are basic tools lol just be you can’t use them or to broke to have one once again doesn’t make it not basic. I put money on it that if you needed a planer you could call someone to use it or buy one for 200 bucks dewalt has a hand one....... lol mr gardener just stop and go back to your green house and leave the tools to us men.
@HasekiVivabook
@HasekiVivabook 2 месяца назад
so good and healty
@XavierP333
@XavierP333 8 месяцев назад
Great work. It's easy, only if you have the power tools at home
@Gillysaurxx
@Gillysaurxx 3 года назад
“Really simple, you can make it with hand tools”...pulls out planer and table saw
@supertroepie260
@supertroepie260 3 года назад
Exactly!
@MUSTANGHUNTER
@MUSTANGHUNTER 3 года назад
🤣
@xr8rick
@xr8rick 3 года назад
I was thinking the exact same thing.
@jacobthompson5042
@jacobthompson5042 3 года назад
You can still do it with hand tools he just has the tools to make it easier
@fatboyshadetree5139
@fatboyshadetree5139 3 года назад
"Make it with hand tools" but uses about a thousand dollars worth of power tools and specialty tools to get it done. I never even saw those corner springs before.
@pablitoscards
@pablitoscards 7 дней назад
Amazing job❤
@garyjust.johnson1436
@garyjust.johnson1436 Год назад
Nice! Great video!
@JkCanvas
@JkCanvas Год назад
Thank you
@diegopellecer
@diegopellecer 7 месяцев назад
Its pretty easy but those tools aren't the usually tools I have in my house. Amazing work!!
@SalvatoreCostasowegot
@SalvatoreCostasowegot 3 месяца назад
I made 3 of them with an hacksaw, a hell of a job but in the end I made it. I built a grid of 8cmX4cm slot for a total of 220 slots using a 3cmX1cmX100cm wood. I used a total of almost 99 meters of wood! :-)
@josekma1
@josekma1 3 года назад
WOW, nice shop!!!
@RiverasHotWheels
@RiverasHotWheels 4 года назад
All you had to do was RU-vid search “Hot Wheels Display Rivera” 😁 first I made one that holds 150 cars. Then I made 2 that hold 180. Then I made one that holds 216 cars! That one is massive! I like the display you made. Poplar frame and nice backboard. Legit 👌🏽 Love your assembly table!
@JkCanvas
@JkCanvas 4 года назад
Rivera's Hot Wheels I will have to check them out. The 100 card display was quite big. I can only imagine what 216 parking spots looks like. Thanks for stopping by.
@RiverasHotWheels
@RiverasHotWheels 4 года назад
Jk Canvas - it’s massive lol
@JkCanvas
@JkCanvas 4 года назад
Rivera's Hot Wheels yes it is 12x18 slots approx 36” tall and 48” wide.
@josemalave5287
@josemalave5287 3 года назад
I saw your videos but no mencionas las medidas
@RiverasHotWheels
@RiverasHotWheels 3 года назад
@@josemalave5287 - ya te conteste en mi video.
@WillieBeard
@WillieBeard Год назад
I had to rewind a little, but yup you said "basic hand tools"!
@HJ-fm4td
@HJ-fm4td 3 года назад
The beginning was so wholesome. Great video, thanks so much.
@joserramejia332
@joserramejia332 5 месяцев назад
I got one of this, but i want to make my own project and i have the tools, sure this weekend i tri 😊
@SuperKalikush420
@SuperKalikush420 3 года назад
Awesome! Thank you for the video! I’m putting my husband to work ASAP! Lol
@JkCanvas
@JkCanvas 3 года назад
Awesome. If he doesn’t have a planer he can used the S4S lumber from the big box stores.
@ifitsnotbrokenfixit1193
@ifitsnotbrokenfixit1193 4 года назад
Did I see a moving trailer backed up to the garage? Being a fly boy figured it would have been made out of something like elm, mahogany, maple, western red cedar, cheery, I kid I kid. Turned out great thanks for sharing.
@JkCanvas
@JkCanvas 4 года назад
If it's not broken fix it yes that is my moving trailer. We relocated to Memphis, TN. I have glucose guardian now.
@user-id8cx6pw2i
@user-id8cx6pw2i 4 месяца назад
This would be great for my great grandsons bedroom. The oldest great grandson has anywhere between 200 - 300 matchbox cars. His brother is due in May. I would love to make this for their bedroom.
@JkCanvas
@JkCanvas 4 месяца назад
Send me an email to canvas@jkcanvas.net and I will send you the plans.
@undraftedplayer
@undraftedplayer 4 года назад
Hi from France. Awesome job ! Your display case is So Great. Personnaly i haven't got the skills and the tools to make one like this. Happy fixing & Happy Building. All the Best.
@JkCanvas
@JkCanvas 4 года назад
undraftedplayer thank you for the kind words and for stopping by.
@HvyMetal4Ever
@HvyMetal4Ever 3 года назад
I'm going to have utilize this, but not for a hot wheels collection. I'll be building something similar for my cassette collection.
@JkCanvas
@JkCanvas 3 года назад
tag me on Instagram when you get it built. I would love to see how it turned out.
@katiaorozco9990
@katiaorozco9990 3 года назад
I would love to make that for my father since he loves these little cars.ty so much for the video ☺️
@keithanderson8488
@keithanderson8488 3 года назад
Old coke bottle wooden crates work well,just add couple dividers😄
@JoseAlvarez-jz6pd
@JoseAlvarez-jz6pd 11 месяцев назад
Really need this pc😮🤙🏽 have a lot of cars and actually just moved and want to display them!!! 🔥
@seejanedrill
@seejanedrill 4 года назад
Really creative project...bet you had a blast doing it.
@user-hx3nw3vj8m
@user-hx3nw3vj8m 4 месяца назад
You to can make this nice shelf if you have a well stocked wood working shop
@dalistuff
@dalistuff 2 года назад
Great build! too bad I don't have the machinery but do have the cars! Happy New year! be safe & be vigilant.
@kennethsimmons5235
@kennethsimmons5235 5 месяцев назад
thank you
@MooseZ71
@MooseZ71 4 года назад
"Basic hand tools" Proceeds to whip out a planer and table saw. 😆
@JkCanvas
@JkCanvas 4 года назад
MooseZ71 I thought every shop has the basics, a table saw and planer.
@MooseZ71
@MooseZ71 4 года назад
@@JkCanvas But those aren't hand tools. And I would think most diecast collectors don't also have a woodworking shop.
@jspiteri33
@jspiteri33 2 года назад
Looks awesome great job
@BradsWorkbench
@BradsWorkbench 4 года назад
Ooooooh thats a purty plane. Glad to see you got her tuned up. Would love to see ur finish process with that total boat stuff on your IG
@JkCanvas
@JkCanvas 4 года назад
That plane is my favorite and my go to. Thank you my friend. I have a video coming up that has the process. Thanks for stopping by.
@ronalddavidasagra9237
@ronalddavidasagra9237 Год назад
what a great guy
@TheGrantAlexander
@TheGrantAlexander 4 года назад
Looks great! And a really cool way to display the cars! 👍👍
@JkCanvas
@JkCanvas 4 года назад
Thanks and it was a fun build
@BSSMALLENGINES
@BSSMALLENGINES 4 года назад
You made that look easy. I might have to make one for all my old hot wheels
@paulb91
@paulb91 3 года назад
Easy if you have a workshop with all the tools. Sod that with a hand saw.
@sergio1180
@sergio1180 4 года назад
It looks awesome. Thanks for the video.
@JkCanvas
@JkCanvas 4 года назад
Sergio Acension thank you for the kind words and stopping buy
@sergio1180
@sergio1180 4 года назад
@@JkCanvas build or fix that's what I do.
@cjromecki5086
@cjromecki5086 2 года назад
Awesome job! Great display piece for Hot Wheels/Matchbox!
@eduardodesoto
@eduardodesoto 5 месяцев назад
Basic hand tools…😂
@ahleckz5516
@ahleckz5516 3 года назад
Awesome! Good job! ♥♥♥
@JkCanvas
@JkCanvas 3 года назад
Thank you! Cheers!
@jeffmyers8088
@jeffmyers8088 3 года назад
Yes I just love it. U said u are shipping it out. I collect hot wheels and all mine are in a box. What would it cost to have one made
@JkCanvas
@JkCanvas 3 года назад
@@jeffmyers8088 it would cost you $500. It is not cost effective to ship at $100 plus dollars due to the size. The one in this video was for made for a single mom.
@chrisnikas9598
@chrisnikas9598 Год назад
I wonder how he fixed the grid to the backing board… Looked like it was a good 1” out off the back if not more.
@JkCanvas
@JkCanvas Год назад
The grid is friction fit. I did use CA Glue on all the intersections.
@lexsanchez8554
@lexsanchez8554 4 года назад
an awesome job!
@JkCanvas
@JkCanvas 4 года назад
Lex Sanchez thank you for the kind words and stopping by.
@martymcfly3986
@martymcfly3986 2 года назад
great job man!
@averagejane09
@averagejane09 2 месяца назад
Those orange 90 degree angles are a fantastic idea. I have never seen those before - custom to this type of application to be clamped on the inside of frames. If I were to search for those to order what would I call them? There also were some type of wire clips used briefly....
@JkCanvas
@JkCanvas 2 месяца назад
I bought them off Amazon. amzn.to/3V9Dwzq
@luizcarlospereira4196
@luizcarlospereira4196 Год назад
Sensacional.
@sharonpapandrea3594
@sharonpapandrea3594 4 года назад
Nice job !!
@supertroepie260
@supertroepie260 3 года назад
I would to like see people do this without electrical tools, now that would be impressive.
@JkCanvas
@JkCanvas 3 года назад
I don’t have that skill set yet. Working on building my hand tool skills.
@V4mp_6
@V4mp_6 2 месяца назад
I wanna build it but can you tell me the measurements for everything so i don't mess up
@YouCanMakeThisToo
@YouCanMakeThisToo 4 года назад
First! Came out great, Will! Really liked the hot wheel intro.
@JkCanvas
@JkCanvas 4 года назад
YouCanMakeThisToo you have to make car sounds playing with hot wheels.
@BeardedSeabee82
@BeardedSeabee82 4 года назад
Great how to, editing gettin awesome! Hope yall doin well now that things finally startin to get settled
@ismael9841
@ismael9841 2 года назад
“Even you can do one”
@bpacheco6
@bpacheco6 2 года назад
Great job. I made similar but made the mistake of using hardboard for the sections and it broke apart too easily on the dado cuts during assembly. Plywood next time! Could you let me know your spacing on the dado cuts on the 40 and 20 inch pieces? Thanks
@perezremodeling4883
@perezremodeling4883 11 месяцев назад
same question here.
@Fukutube01
@Fukutube01 3 года назад
“It’s real easy, all you need is your basic hand tools..” The first you show is a $500 some power tool
@JkCanvas
@JkCanvas 3 года назад
Actually it was a $150 planer that I got off Facebook Market Place. Reason I did not go and S4S lumber from Home Depot , I had a planer and 4/4 Poplar.
@erniegarza9330
@erniegarza9330 3 года назад
I was just wondering would u Make one and sell it how much would u charge for one just wanted to know Because I don't have tools to make one
@iribar5686
@iribar5686 3 года назад
I am in line! My son has nearly 300 cars.
@bradleyjohnson452
@bradleyjohnson452 Год назад
@@iribar5686 Thats a good start
@jorgecolon4218
@jorgecolon4218 10 месяцев назад
Would you consider selling them ? Please let me know great work
@TotalBoat
@TotalBoat 4 года назад
I use to have the best hot wheels, back in the day
@JkCanvas
@JkCanvas 4 года назад
TotalBoat I have a 10yo so I can still play with Hot Wheels and not get funny looks.
@dingmah
@dingmah 3 года назад
Step 1: have a couple thousand of wood working tools all set up in your garage and truck to transport raw materials.
@jonesyhr4731
@jonesyhr4731 2 года назад
What were the cut spacing between the 20 inch strips and the 40 inch strips ? Excellent video brother!
@JkCanvas
@JkCanvas 2 года назад
The vertical spacers are approximately 3” on center and the horizontal spacers are 2” on center.
@ginacapecchi
@ginacapecchi 3 года назад
End result is great! Would love to make my son one, but I don’t have a router or dato blades!
@JkCanvas
@JkCanvas 3 года назад
You don’t need a router or dado stack. I used a single blade and made two passes to get the right width. The router just made fitting the back better. Not required.
@ginacapecchi
@ginacapecchi 3 года назад
Jk Canvas maybe I’ll give it a try and modify it a bit! I do have a table saw but it can be a bit intimidating!
@JkCanvas
@JkCanvas 3 года назад
Gina Julien send me an email canvas@jkcanvas.net and I will send you the plans I have made.
@JkCanvas
@JkCanvas 3 года назад
@@ginacapecchi Just take it one process at a time. Also be sure to put all the long pieces together and the short pieces together so you dado's are in the same spot on all pieces.
@ginacapecchi
@ginacapecchi 3 года назад
Jk Canvas thanks for the tip!
@2sassy27
@2sassy27 3 года назад
My daughter really wants something like this to display her hot wheels collection... Woykd you consider making one for her 17th birthday, I'll pay...
@JkCanvas
@JkCanvas 3 года назад
Go to Jkcanvas.net and fill out the commission request.
@epi4561
@epi4561 2 года назад
Looks beautiful... considering the same thing only with shallow stop dados or whatever they are called in the poplar trim pieces that would allow the edges of the outside columns to be supported as well as lock the entire floating grid in from behind, once the back is installed. Or does that all sound unnecessary? just worried about the unsupported edges of the outside columns.
@slliks67
@slliks67 Год назад
Hand tools yeah right...🤠😑
@steve177cal5
@steve177cal5 5 месяцев назад
Basic hand tools he said.. 2 mins in and not a hand tool in sight
@unseenstorybehindsrilankan4038
@unseenstorybehindsrilankan4038 2 года назад
Can you make it from aluminum also?
@JkCanvas
@JkCanvas 2 года назад
I imagine you can.
@unseenstorybehindsrilankan4038
@unseenstorybehindsrilankan4038 2 года назад
@@JkCanvas is it beautiful than the wood one
@JkCanvas
@JkCanvas 2 года назад
@@unseenstorybehindsrilankan4038 I bet it is and depending on how the finish is applied. In a previous career I was an aircraft metal worker and worked a lot with aluminum.
@unseenstorybehindsrilankan4038
@unseenstorybehindsrilankan4038 2 года назад
@@JkCanvas ok thank u:)
@johnfaulk7775
@johnfaulk7775 3 года назад
“Rivera’s Hot Wheels” has been doing this for a while. His newest is 12 across and 18 down.
@JkCanvas
@JkCanvas 3 года назад
I am building one for my buddy who is local and his is 12x15 with the bottom row for his semi trucks. I will post on Instagram the progress.
@lfecustom9474
@lfecustom9474 3 года назад
Awesome video! what were the measurements for the shelves boards? how WxDxH? Also, what was the thickness of the selves wood you used?
@JkCanvas
@JkCanvas 3 года назад
Used 1/8 luan. The cubbies are 3”Lx2”Wx2”H. Send me an email canvas@jkcanvas.net. I have a Fusion360 file.
@lfecustom9474
@lfecustom9474 3 года назад
@@JkCanvas awesome! thank you just emailed you.
@OkraBabe1
@OkraBabe1 2 года назад
@@JkCanvas if the cubbies are 2" deep shouldn't the strips be cut to 2" instead of 1-1/2"?
@JkCanvas
@JkCanvas 2 года назад
@@OkraBabe1 sure.
@keithbryan8432
@keithbryan8432 3 года назад
How did you secure the cubby hole section to the frame/back?
@JkCanvas
@JkCanvas 3 года назад
It was a tight fit so no fasteners. If you want use some 23g 1/2 pin nails
@faaiqkamaldeen4781
@faaiqkamaldeen4781 4 года назад
How much would this cost in average for materials
@yoicks111
@yoicks111 8 месяцев назад
Awsome video but come on easy to do with hand tools? Lol
@user-iq9ud7jd5f
@user-iq9ud7jd5f 8 месяцев назад
What dimensions did you cut the strips for car placement?
@JkCanvas
@JkCanvas 8 месяцев назад
The strips were cut 2” wide by 46.5” long for horizontal pieces. The vertical pieces were cut 2” wide by 24” long. The dado on the horizontal pieces is 3” and the dado on the vertical pieces they are 2”.
@bryanmoir3184
@bryanmoir3184 Год назад
Great video.. I want to make one for my grandson. How do you fasten it to the wall? Screw directly into a stud? French cleat?
@JkCanvas
@JkCanvas Год назад
It is not cost effective for me to make and ship because shipping is close to $200. I do have a set of plans that I can send you. I fasten them to the wall with French Cleats.
@bryanmoir3184
@bryanmoir3184 Год назад
@@JkCanvas Yes that would be helpful! How is this best done?
@bryanmoir3184
@bryanmoir3184 Год назад
@@JkCanvas Can you send me the plans?
@JkCanvas
@JkCanvas Год назад
@@bryanmoir3184 send me an email canvas@jkcanvas.net and will get you what I have.
@jasmeharsinghkapoor571
@jasmeharsinghkapoor571 4 года назад
This is easy???
@AntonioClaudioMichael
@AntonioClaudioMichael 4 года назад
Great video JK
@Jrmedlock
@Jrmedlock 2 года назад
Can you supply plans for this build?
@wackrow
@wackrow 2 года назад
were did you get the corner clips and the orange squars?
@JkCanvas
@JkCanvas 2 года назад
Third link in the description. It is an Amazon Affiliate link.
@seanaprilaron5964
@seanaprilaron5964 3 года назад
I was wondering if you had the plans?
@johnnilsson1311
@johnnilsson1311 3 года назад
What basic tools??????
@willsonmendes
@willsonmendes 3 года назад
Too bad I dont have all these tools...
@yasmanycorrea3643
@yasmanycorrea3643 4 года назад
Looks nice!!! BUT... Don't have the any of those equipments to begin with! Probably would need to invest in alot money and then find a good space/room to set up all that equipment...then personally for me, I would at least learn a bit of carpentry because I'm no skilled or pro carpenter...and I don't go well with cutting/sharp objects....I rather just buy it instead...or do other DIY projects that doesn't require much heavy cutting nor wood because with that you'll need good equipment...but overall its really nice!!🤙
@geoff2082
@geoff2082 11 месяцев назад
easy said than done mate if you dont have the tools you cant do jack shit but looks good
@FDNProductions
@FDNProductions 3 года назад
I was searching on Amazon for a storage unit a bit like this to display my LEGO Minifigures. I found one for £20 that had 64 compartments. Only problem is that there isn’t a glass door
@genevanzyl6296
@genevanzyl6296 6 месяцев назад
Can you email me the plans so i could make my own display, awesome video !!
@JkCanvas
@JkCanvas 6 месяцев назад
send me an email, canvas@jkcanvas.net
@genevanzyl6296
@genevanzyl6296 6 месяцев назад
@@JkCanvas email sent , thanks
@Stingray57
@Stingray57 3 года назад
How did you attach the grid to the frame?
@JkCanvas
@JkCanvas 3 года назад
The grid was a tight fit so it was a friction fit.
@MakeSomething
@MakeSomething 4 года назад
😉🙌
@JkCanvas
@JkCanvas 4 года назад
Make Something thanks for stopping by.
@josemalave5287
@josemalave5287 3 года назад
Awesome, could you share the dimensions
@JkCanvas
@JkCanvas 3 года назад
Send me an email canvas@jkcanvas.net.
@Poor_Mans_DIY
@Poor_Mans_DIY 4 года назад
great video. Now I need to go back to my folks house to see if I can find my old hotwheels so I can make a display. LOL. By the way, If you throw around your wood like you dig in your future videos, we are going to have to report you to the authorities for wood abuse. LOL! Well done, sir If you dont mind my asking, what brand flush bit do you use? That tore through the wood like butter.
@JkCanvas
@JkCanvas 4 года назад
Poor Man's DIY the dropping of the wood is a nod to @jimmydiresta. Thanks for stopping by.
@i3diamonds
@i3diamonds 3 года назад
How far apart are each cut on the 20" & 40" pcs
@i3diamonds
@i3diamonds 3 года назад
What width did you use on each length?
@JkCanvas
@JkCanvas 3 года назад
Randy Cruz 2”H x 3”L x 2”W. Made the short insert 16” long insert 45”.
@michaelmitschsr.9412
@michaelmitschsr.9412 2 года назад
Really enjoyed this. I don't have the tools but have always wanted them. Learnt a lot and REALLY appreciate you making this. Had never really known how to square up a frame. Can you tell me where you got those clamps and orange plastic angle things?
@JkCanvas
@JkCanvas 2 года назад
Here is the link for the corner clamps. amzn.to/3BpohGh
@rawleragbir7078
@rawleragbir7078 Год назад
Awesome. How much if you sell?🎉
@JkCanvas
@JkCanvas Год назад
Thank you for the kind words. I do not sell these but I can send you the plans. Shipping is outrageous on this piece because of the size.
@francineganmor9952
@francineganmor9952 3 года назад
How did you fasten all of the shelves to the back?
@JkCanvas
@JkCanvas 3 года назад
It was a tight fit so friction holds then in. You can use pin nails through the back panel
@rojasdavis
@rojasdavis 3 года назад
What are the measurements of the inside cubbies for the hot wheels? What is the overall measurements? I love the idea !!! I wanna try building one
@JkCanvas
@JkCanvas 3 года назад
@@rojasdavis send me an email canvas@jkcanvas.net and I will send you the pdf of the dimensions.
@blackdeath1619
@blackdeath1619 Месяц назад
How much would it cost for me to request you to make me one of these?
@YouCanMakeThisToo
@YouCanMakeThisToo 4 года назад
You stole my outro! Haha, I'm good with it.
@JkCanvas
@JkCanvas 4 года назад
YouCanMakeThisToo actually have your credit for it though. I am going to highlight my favorite content creators in my video’s as Easter eggs
@richardskelton2097
@richardskelton2097 3 года назад
Ha! basic hand tools
@sandbergDK2500
@sandbergDK2500 2 года назад
Yeah cuss we all have those tools in our garage…. Pfffttt
@johnarviola6332
@johnarviola6332 2 года назад
Can you make a few for me
@edgardoarroyo7418
@edgardoarroyo7418 2 года назад
make me one
@JkCanvas
@JkCanvas 2 года назад
I can send you the plans so you can make one.
@lukasl9420
@lukasl9420 2 года назад
@@JkCanvas I really enjoy your vid. I'd like to make one for my son for Christmas. Could you please send plan?? Many thanks, Luke
@R26Roman
@R26Roman 4 года назад
I guess he forgot to mention the thousand dollar tools I'll also be needing. Well at least the material is only $5
@johnfaulk7775
@johnfaulk7775 3 года назад
Beautiful Job!!! Do you take orders?
@JkCanvas
@JkCanvas 3 года назад
No I am not taking orders because the profit is just not there. To make it worth making with cost of materials, labor and shipping this piece is over $400.
@christopherantonio3453
@christopherantonio3453 2 года назад
What the dimensions of that?
@andrewnunez5680
@andrewnunez5680 3 года назад
Can you send blue prints ?
@JkCanvas
@JkCanvas 3 года назад
Send me an email canvas@jkcanvas.net.
@prabhakarki3594
@prabhakarki3594 4 года назад
Do you sell them too?
@JkCanvas
@JkCanvas 4 года назад
prabha karki I do not.
Далее
Classic Italian Pasta Dog
00:20
Просмотров 1,4 млн
NOOOO 😂😂😂
00:14
Просмотров 14 млн
Fancy VS Classic #shorts  @CRAZYGREAPA
00:33
Просмотров 923 тыс.
The best way to display loose HotWheels? (DIY)
7:17
Просмотров 13 тыс.
When A Gang Leader Confronted Muhammad Ali
11:43
Просмотров 6 млн
DIY Toy Car display | Hotwheels storage
11:33
Просмотров 15 тыс.
Every beginner needs to hear this
11:10
Просмотров 1,5 млн
Classic Italian Pasta Dog
00:20
Просмотров 1,4 млн