No video :(

Easy Way Sharpen Drill Bit Use Angle Grinder - FREEPLAN

Подписаться 162 тыс.

Просмотров 47 тыс.

50% 1

#plywoodworking #Twistdrill #sharpeningdrill
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
Easy way for sharpen drill bit use angle grinder with simple jig. Easy for build simple but have many impact for your work, i hate if my drill bit dull that why i build this jig for easy sharpen my drill bit
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Music Track:
Music Info: Ambient Cinematic Piano by DS Productions
Music Link: • Ambient Cinematic Pian...
Music Info: Acoustic Guitar Background by DS Productions
Music Link: • Acoustic Guitar Backgr...
Acoustic Inspiring Soft by RomanSenykMusic.
Acoustic/Folk Instrumental by Hyde - Free Instrumentals
Wondering - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-wondering
Music promoted by Audio Library • Wondering - Atch (No C...
------------------------------

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@jvmiller1995 2 месяца назад

When using a push stick on a table saw you should place it close to the blade not the fence as it will push it into the fence if it tries to twist. If you do it on the side by the fence you can push it into the saw blade away from the fence. Not trying to be a troll and knit picking, just trying to help people that might be watching as well as yourself. This is a pretty good Idea.

@plywoodworking 2 месяца назад

thank you very much for good tips, correct me if i made mistake 😊

@jvmiller1995 2 месяца назад

@@plywoodworking Trust me I do not make videos because I would b called out the first time I turned on a table saw with no upper or lower guard on my shopsmith. lol Hell me just using a shopsmith would piss most people off. Lol But it is never bad to encourage others not to take short cuts or make mistakes. Looks like both of us still have all our digits. If 40 years I have only grabbed the 3/4 router blade once while spinning in a 3/hp. The wood working gods was nice enough to let the pad of my finger and thumb to grow back . More than some can say. I will check your channel out a bit deeper.

@abdulghaniabdrahim6676 3 года назад

Very accurate for shapen the drill bits I love it .

@plywoodworking 3 года назад

Glad you like it

@jvmiller1995 2 месяца назад

A friend of mine has a bowling alley and a proshop and drills 100's of balls a year. His bits have a #2 morrest taper and are carbide. About 3k for a new set. SO I/ had him get me a diamond disk I am going to put in the shopsmith then I can set the table and miter to the right compound angle. I am going to weld two pieces of ange one in a V about 2 inches for a tray to hold the bit the other will be at a 90% to blot to the miter and then weld to the V track piece. This way the small bits with a larger taper the taper will be held off of the table and away from the miter gage. Then I should be able to advance the quill direct into the flat carbide at the right compound angle to clean them up perfect.

@plywoodworking Месяц назад

thank you very much for the tips, i will try like you ask.