Easy Way to Change or Upgrade Your BambuLab P1P Nozzle

Подписаться 14 тыс.

Просмотров 62 тыс.

50% 1

In this video I show you step by step how to change your BambuLab P1P nozzle. I switched out my .4mm nozzle for a .6 for even FASTER prints!
Wanna learn how to design your own 3d prints? Join my free 1 hour workshop! Click here to sign up for the next class!
event.webinarj...
Want more AMAZING 3d PRINTING FILES? --- www.nikkoindus...
Want to support the channel? Join my Patreon!-- / nikkoindustries
Affiliate links. I get a small commission when you buy from these links. It really helps me and my family out when you use my links :)
What 3d Printer do I use?-- CR10S4 3D Printer-- www.tinymachin...
What filament do I use?-- Zyltech Nikko Industries Hot Rod Red Silk PLA- www.zyltech.com...
What do I use to build my props and armor?
3d Printing Nozzles-- amzn.to/390t3NF
File Set-- amzn.to/2WUmdDB
Palm Sander-- amzn.to/37ZOfUk
XTC 3D-- amzn.to/3pyL5wR
3M Sand Paper-- amzn.to/2Mf5BnT
Zyltech PLA-- www.zyltech.com....
Krylon Fusion Metallic Silver-- amzn.to/3hAK1WK
DAP Spackle-- amzn.to/3aPGJxm
Wood Filler-- amzn.to/3rE6zKI
CR10S4 3D Printer-- amzn.to/3nXVNN2
Bondo Glaze and Spot Putty-- amzn.to/3rxr6jY
1
Filler Primer-- amzn.to/3n0wfNW
Rustoleum Gray Primer-- amzn.to/3aTdM3u
Disposable Brushes-- amzn.to/37VNifQ
Safety Glasses-- amzn.to/2WUmPJp
Respirator-- amzn.to/3n03kd5
Fiberglass Resin-- amzn.to/2KZAxYJ
Rotary Tool-- amzn.to/3rLQ3IP
Vintage Gold Spray Paint- amzn.to/2MiWse9
Cherry Red Gloss-- amzn.to/3mYdF9s
Alex Flex-- amzn.to/3pycsqT

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@JoeBlack-zg6ld 5 месяцев назад

video opens on a closeup of the relevant part and starts with "first thing you gotta do is" - followed by detailed concise instructions. Great job!

@hoggmann7217 2 месяца назад

definitely need more of these guys. hate skipping a 30 minute intro and 15 side bars to get to the part i'm stuck on

@sskkoibelgium159 10 месяцев назад

And final quality print is always so horrible? 😅

@chrisradical2046 Год назад

so refreshing for a video to get straight to the point without unnecessary intros and begging to like and subscribe because the algorithm blah blah blah. Thank you, it was very helpful. (Liked and subscribed because you earned it}.

@hippopotamus86 7 месяцев назад

Although everyone should be aware that at 3:10, they tried to put the clip on incorrectly, and instead of telling everyone, they cut to a shot of it added correctly. Doing it their way can damage the thermistor.

@cmahar3 7 месяцев назад

That's what I was going to say! No scratch screen. No "hello everyone", or bs talk talk. Just straight to the point! Bravo for that.

@chrisradical2046 7 месяцев назад

@@hippopotamus86 yeah I almost got it wrong end it's easy to miss it but since you went that far an have it in front of you it's not hard to figure out how it goes back in. I mean the clip itself is self explanatory - leaving room for the cable.

@hippopotamus86 7 месяцев назад

@@chrisradical2046 You say that but another RU-vidr put it on wrong on an offbrand hotend while complaining that they didn't make a clip for the specific hotend. It would have fit if they turned it the other way around.

@ilKamuTube Год назад

I would point out that, for approximately $20 difference, it might also be convenient and safe to take the Complete Hotend Assembly.

@SyntheticFuture Год назад

Yeah I was thinking of grabbing a variety of nozzles but after 1.5 minute I figured it'd be much easier, faster and lower risk to get a set of additional assemblies and only change the nozzle if it has issues 😅

@supermanscott Год назад

I was thinking the same. That looks too risky for me.

@JEYMS 10 месяцев назад

Definetly. And you have some spare parts as a bonus with the ease of use.

@ThePhilthy77 9 месяцев назад

fucking nightmare assembling this piece of shit

@ex0ja Месяц назад

I made the mistake of not getting full assembly, I thought that meant it came with the part fan "I don't need another one of those" haha

@sv61786 7 месяцев назад

The A1 ruined me, because this looks like too much work lol. I’m just gonna keep the stainless one on 😂

@cheizaguirre5494 5 месяцев назад

A1 is better? Quicker?

@RyanOHeron 4 месяца назад

thank you. holy shit that was a pain in the ass though

@KardesDesign Год назад

I will just buy the full assembly or buy the heater/thermistor and put them permanently on a nozzle.

@Xizervexius Год назад

Same, while not that big of a deal to assemble it all, with the entire assembly you get spare fans etc if really needed.

@obie224 Год назад

No one gives a fuck what you're going to do.

@armorhide406 3 месяца назад

Cheers for including a slicer comparison for newer folk! As well as a practical demonstration

@steppedon Год назад

Prusa has a gigantic opportunity here with nozzle changes.

@imbadatthisgame1681 Год назад

E3d revo

@StephenEtherington 18 дней назад

I have just installed the 0.6 Nozzle for my P1S and Bambu Slicer says there is virtually no speed difference between the 0.6 and 0.4 nozzle, am I doing something wrong

@forcemarine 18 дней назад

When I removed the thermister it didn't go well and the wire separated into two. Now the P1S says "The nozzle temperature is abnormal, the sensor may be open circuit." I have no idea what to do. Should I exchange the machine to Bambu for another?

@drewmalbica7694 Год назад

Why did you said you had an x1 carbon when you used a p1p?

@patopatostudio 6 месяцев назад

I saw the same issue lol

@ItsAweeb 8 месяцев назад

Just changed .02 to my Bambu, thanks this was useful!

@hipro84 8 месяцев назад

0:00 straight into it. Love it

@737AMT 3 месяца назад

Yeah my thermistor was permanently installed from factory. Did not come off like the video.

@mothershipco Год назад

not gonna lie the final print looked pretty poor, and you printed on a P1P and not an X1C as stated. Not that it matters, just noticed these things.

@Optix-Code Год назад

Just buy the whole assembly and you're done easy as that. You forgot to cut the filament before removing it.

@Swerewolf Год назад

The Ceramic heater will NOT come off of mine, I'm afraid to pull on the wiring. :( Not sure what I can do at this point.

@obie224 Год назад

Sell the printer to someone else who isn't retarded.

@davidfigueroa1969 Год назад

Are the nozzles always a complete assembly change? That seems really inconvenient - especially if the nozzles are brass instead of hardened steel.

@hologos_ Год назад

This is not brass, this is stainless steel, but not hardened. Still it will print a lot more than brass one.

@theElemDragon Год назад

Really? I feel like it's MORE convenient to just change the whole assembly. Why? 1) don't have to worry about heating up the hotend to hot-tighten the nozzle when you change it. 2) don't have to worry about getting a good grip on both the nozzle AND the heater block when trying to tighten the nozzle (like on my Ender 3 S1 Pro) so you don't twist something that shouldn't be twisted. 3) since the Bambu automatically retracts the filament when printing is done, as far as I'm aware, don't have to even worry about doing that prior to switching to a larger/smaller nozzle.

@nick066hu Год назад

Is there any advantage of the normal steel nozzle versus the hardened one ? They cost the same, so I can install the hardened one and forget about the normal?

@petercallison5765 Год назад

Crazy that they used a stainless steel one. Nobody uses those and they are the same price.

@TouchofDepth 8 месяцев назад

this is the type of content and structure I like, thanks for the video

@boboscurse4130 11 месяцев назад

I've been watching videos on lithophanes and they say to use a .2 nozzle. I had no idea swapping nozzles was such a huge hassle.

@louisburk7221 11 месяцев назад

Thats really easy! You should have tried it on older Prusa Models

@ryanoceros9382 11 месяцев назад

For other printers, its not. Its just unscrewing and screwing a new nozzle in

@inazuma1 9 месяцев назад

It's not usually this difficult. Bambu also sells the nozzles already assembled, so it's usually 2 screws, unhook wires, put the new nozzle on, put the 2 screws back in, plug the new nozzle wires in, good to go. Very simple. The nozzle in the video is not pre-assembled, which they also sell, they're just cheaper than already assembled nozzles. The price difference is so minimal that it's worth just getting a pre assembled nozzle. I actually find it easier than trying to change the nozzle on my Ender 3 since I don't have to preheat the nozzle, and no worries about if the new nozzle is fitting snug, etc etc.

@words13100 6 месяцев назад

The title says P1P and in the video you said X1 Carbon. Which is it?

@HarrisonMartinson 4 месяца назад

I don't think it matters at all. They both seem to have the same process for swapping hotends/nozzles

@jankanning 5 месяцев назад

Good video, but I had a problem. When I removed the thermal cable from the nozzle, the cable broke because it was stuck in the hole so tightly that I couldn't pull it out. Now I can't use the printer until I receive the new delivery from Bambulab. What is your solution to unplug stuck thermal sensors?

@forcemarine 18 дней назад

The same exact thing just happened to me. did you end up needing to do a full replacement?

@jankanning 18 дней назад

@@forcemarine I´ve replaced the thermal cable with plate, after this everthing works again

@Shootingtimearchery 6 месяцев назад

Thank you for a great and quick video... Love all the people that show how to do the simple assembled unit. You took the time to show how to just change the hot end. I appreciate it!!

@billbyrd9845 4 месяца назад

Thanks for the very thorough step by step. I'm about to print some marble filament for the first time on my P1S and wanted to know how to remove the nozzle if it clogs as it did on a different printer. You mentioned a retraction flow. How do you identify a retraction flaw? Thanks. Liked and subbed up and commented.

@Beskar181 Месяц назад

So you cant just unscrew the nozzle and screw in a new one?

@ex0ja Месяц назад

Only if you bought the "full assembly", otherwise you have to do this every time, better to just get full assembly

@phillywonkaCa Год назад

I have a Carbon X1 and the original .4 nozzle. I just got a .6 nozzle but when I sliced it in Bambu Studio the .4 was often faster than the .6! Apparently it's tweeted for .4. Your video shows a significant savings in time (like my Prusa does when I use the .6) but my slices show otherwise. Any thoughts on real world .6 nozzle times and usage after your last few weeks?

@petercallison5765 Год назад

He sliced the 0.4 at 0.2 layer height and the 0.6 at 0.3 layer height. The layer height accounts for ALL of the time savings.

@HiFiTown Год назад

@@petercallison5765 Extrusion width also makes a really big difference (at least with conventional machines and slicers) Extrusion width, is typically 120% of the nozzle size.

@ilKamuTube Год назад

Hi Philip, I was thinking of buying a p1p and doing some tests with Bambu Studio I noticed the same thing. I am not very experienced and can't figure out if they use more conservative speed settings for flow rate limits or cooling, what do you think? As soon as the input shaper for Prusa MK4 is made official I will do some testing with Prusa Slicer, the Prusa is slower anyway but I find it interesting, if effective, to work on the timings by changing the nozzle.

@PeterAgostiniJdcap26 6 месяцев назад

How often do you need to do this ? Is this the same on the p1S ? Ty

@TheMaxAwesome Год назад

Obnoxious that the thermistor and ceramic heater are part of the same unit on the P1P. One dies? Replace both for double the price. Yippee. And of course this is the one item they don't include a spare for in the box. :(

@SofiaWheatley 3 месяца назад

This tutorial was so easy to follow! Thank you so much. I was able to change out my clogged nozzle for a new one!

@orxion 8 месяцев назад

it would be probably easier (if you need to change it a lot) to keep it as a bundle with the fan, etc and just switch those :)

@techdan7098 7 месяцев назад

Is there anyway just to replace the metal tip without going through this crazy process?

@andrewsciberras Месяц назад

finally changed my nozzle! Thanks for the video!

@yycfoamwars6557 Год назад

Had first layer issues P1P with pei and bambu filament after a dozen prints. Got a .6 nozzle Fingers cossed Thanks for the vid

@maximuschapman7760 Год назад

It's because they make it so you have to use glue. It's not that bad, it actually doesn't even show up in the print

@rand0mtv660 Год назад

@@maximuschapman7760 I never used glue on my P1P. Only time I had issues with first layer was when initially I didn't pick the right plate type in Bambu Studio or I would use prints that had small contact area and would really require a brim, but I used no brim for whatever reason. Other times, using textured PEI plate and official Bambu filament or some other filament I had no issues with PLA or PETG.

@Sophal27 3 месяца назад

You have to wash your pei plate with water and soap and then alcohol, and it will stick as new.

@cheizaguirre5494 6 месяцев назад

Do u need to run a nozzle calibration or anything?

@forrestallison1879 11 месяцев назад

Wait is this the nozzle vhange procedure? This is wayyyyy too slow and hard

@ex0ja Месяц назад

If you buy full assembly it's not like this, you won't have to do the whole heatsink and thermal paste shit etc, that will come with the nozzle

@SquintPug7 11 месяцев назад

how ofter would you need to change the nozzle?

@3DEric 2 месяца назад

that was actually a solid video

@yahyah206 Год назад

thank you very much for this video ;)

@maximuschapman7760 Год назад

You have p1p not x1c?

@bolds52 11 месяцев назад

what size nozzle is the original. I use 1.75 filament

@Schnapsbrennor 8 месяцев назад

It comes with 0.4 nozzle.

@stefanschnell339 10 месяцев назад

to komplicaqtit

@doctorpd1959 Год назад

When and why would you want to use the .6mm nozzle?

@doctorpd1959 Год назад

Nevermind, I watched the whole video and I guess you change it to increase the printing time. Good one :-)

@sSkiRilLexD Год назад

@@doctorpd1959 jesus christ

@petercallison5765 Год назад

You would also use it with wood or carbon fiber to prevent clogs.

@theElemDragon Год назад

Like Peter said, .6mm is recommended for "infused" filaments to prevent clogging. Also to help decrease overall print time as you said. But unless you regularly print at sub-.2mm layer heights on a .4mm nozzle, you won't really notice a quality change at .3mm layer height on a .6mm nozzle. one tenth of a millimeter is almost LITERALLY a hairs bredth.

@anthonylong5870 7 месяцев назад

One of the reasons I barely use my Bambu P1P and now 99% of the time use my Flashforge Adventurer 5M. Its way to much work to just change a nozzle on the Bambu, My Flashforge is just a flip a clip and take out the nozzle

@russnbish 7 месяцев назад

This isn't the "easy way " this is how it's done by bambu directions. Are you that needy for views?

@CaptnSnapcall 6 месяцев назад

You changed not only the nozzle diameter from 0.4 to 0.6, but also the layer height from 0.2 to 0.3. Most of the saved time is due to the layer height. Still awesome video and very detailed and professional explanation!

@TheMaxAwesome Год назад

What an awful nozzle design.