EASY WAY to FLUSH your HOT WATER HEATER TANK

Подписаться 870 тыс.

Просмотров 357 тыс.

50% 1

Don't let you HOT WATER tank fail FAIL early and ensure you are getting the MOST HOT WATER possible while saving money if you know the EASY way to flush out the inside without special tools or expensive chemicals.
Garden Hose: amzn.to/3bsw4Ls
Hose End Caps: amzn.to/3Nf41fC
Hoselink Reel: glnk.io/z7rx/silvercymbal
This video, description & comments may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel & allows me to continue to make videos like this. Thank you for the support!
Check me out on Instagram for great photos and more project updates
/ silvercymbal
Disclaimer:
Due to factors beyond the control of Silver Cymbal, I cannot guarantee against improper use or unauthorized modifications of this information. Silver Cymbal assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Silver Cymbal recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Silver Cymbal, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Silver Cymbal.

Хобби

Опубликовано:

24 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 240

@SilverCymbal 2 года назад

Thanks for watching please LIKE & SUBSCRIBE - Hose End Caps: amzn.to/3Nf41fC - Garden Hose: amzn.to/3bsw4Ls - Hoselink Reel: glnk.io/z7rx/silvercymbal

@JeffreyL-lk2oe 9 месяцев назад

Did you have your water heater in the basement and drain it a floor above you? Did the pressure work?

@mn-mh6uy 2 года назад

“Scalding hot, better to not wear shorts” **proceeds to wear shorts.

@Bremend Год назад

Knew someone also thinking this

@moparfamily814 Год назад

Can I flush my hot water heater without damaging it even if I haven't done it for 3 years straight

@liberiangirl5642 Год назад

Professional!,,

@hokt443 10 месяцев назад

Do as i say, not as i do.

@-.Steven 8 месяцев назад

@@moparfamily814Yes. Yes you can.

@lambrinos 2 года назад

You motivated me to flush my two water heaters. I'm really looking forward to upcoming videos from the new house!

@boondocker7964 2 года назад

Nice vid, I had an indirect fired water tank installed last month, this was very much on my mind, will do it Sunday, good vid.

@doctorhorton 2 года назад

Thanks this is timely every video on the subject talked about turning off the water, which I did. I have tons of sediment that I can’t get out. I’m going to get my drainage all set up and turn the water back on until it gets cleaned out. I bought a threaded 3/4” pvc extension as the plastic drain was leaking (started this entire process for me) and was too narrow for the sediment to exit

@marccongdon 2 года назад

So at this point your videos just end up getting added to my honey do list for the weekend, just flushed mine and was amazed at the gunk that came out. Even with what I thought was a pretty decent filter setup I had put together. As usual thank you for this tip.

@LuckyFullPR 4 месяца назад

I did it and added a step of opening the hot water falve and now I got water dripping from both side. HOW CAN I REPAIR THIS?

@jackdawson3276 9 месяцев назад

Great advice. I have three AO Smith self cleaning water heaters in my properties.. I open the valve into a bucket every 3-4 months. First bucket is usually a little brown. Second bucket is clear. If I forgot to do it and wait 6-8 months, then the first two bucket are dark brown. It takes 4-5 buckets for it to clear out. Ive been doing ever sonce my water heaters new 16 yrs ago. They are all going strong. It's so easy to do, especially with the self cleaning heaters. The sediment gets stirred up alot when you open the valve

@shelleynobleart 2 года назад

Great info. I use the links in your descriptions to add to my cart. Boom. So easy.

@arrowv1 2 года назад

I always learn something new. Keep it coming. Great videos!

@jons2447 Год назад

"Thank You!", Mr. Cymbal! Reminded me I needed to drain my water heater again since it had been 15 or 16 years. Have a GREAT day, Neighbor!

@Bear1854 2 года назад

Thanks for that breakdown. It seems pretty intimidating but you showed how easy it is. Thank you again! Long time fan BTW.

@gopackgo4036 2 года назад

“It seems intimidating.” It’s draining water from a tank not rocket science.

@LI.Agentio 9 месяцев назад

Thank You sooo much for making it look easy. And love the tips too.

@spankymagee 2 года назад

If you have real hard water be careful. my tank built up tons of crystals from the previous owners and when I tried to flush, the rocks got stuck in the valve down there where it wouldn't shut off. The crystals were so big in there nothing would come out. If it gets to that point where you hear a lot of noise when it's running, it may be too late for you. But those little rocks will destroy elements as they slosh around in there so make sure you do this often, especially more often the harder your water is. But have one of those caps handy like he showed in case you get crystals jamming up your valve.

@dakotafog7903 Год назад

Oh no. I hear those sounds on mine 😑

@mr1pearl 2 года назад

Wow this is one I didn't know about thanks for the tip !

@4zengrl Год назад

Short, simple and straight to the point! Good tip on the cap too. (I didn’t even have to speed it up! Lol)

@denniszhaunerchyk6191 9 месяцев назад

Thank you for creating videos like this.😊

@elppedro77 9 месяцев назад

Great tips! I would turn off the water heater a day before so I could use the water on my lawn or shrubs and not boil them.

@kdegutis 2 года назад

Good, useful content. Continued success.

@donpudliner1141 2 года назад

Great helpful posts, thanks so much

@kendogz161 2 года назад

Thank you for this.

@ctvxl Год назад

flushing through the drain that way clears very little of the sediment out of the tank. It just removes a thin line down the middle. I have an electric water heater. What I do every couple of years is kill power and shut off the input water to it. I then drain it completely. Next, I remove the lower heating element. I have a 5' length of garden hose that I cut from an old hose. I duct tape that to the nozzle on my wet/dry vac, then I use it to vacuum all of the sediment out of the bottom of the tank. Works very well. I always check the sacrificial anode at the same time, and replace if necessary. I also check the pressure relief valve frequently. Several times per year. In my area, what mostly collects in the tank are little chips of calcium carbonate. If you don't flush it this way, and either don't flush it at all, or if you do the method in this video, the tank will fill up to the bottom element within about 5 or 6 years and cause it to burn out.

@stacyrussell217 Месяц назад

Will you come do my tank in Lima NY? 😁

@Leonardokite 2 года назад

Yet another worthy project...... Thanks (I think 😉)

@gr8whytz29 2 года назад

Very useful information. Love this channel!!

@SilverCymbal 2 года назад

Much appreciated!

@dragoorion2680 2 года назад

Thanks. I didnt know there were end caps for the spigot. Ordering now.

@mikeizack3070 Год назад

Thank you cleared mine today

@joedimarco21 2 года назад

On the topic of this I would also highly recommend checking the anode rod and making sure that doesn’t need to be replaced either.

@bobamato4052 9 месяцев назад

Absolutely needs to be checked every other year.

@carbonking53 6 месяцев назад

Definitely, the anode rod should be checked every year if you use a water softener or hard water with a high mineral content.

@Laguna2013 4 месяца назад

and how do you do this part? @@carbonking53

@musicgirl4794 6 месяцев назад

This was awesome, thank you!!! 🌸

@SilverCymbal 5 месяцев назад

Thank you, glad it was helpful

@sirwolly 2 года назад

I would also recommend a 3 stage whole house water filtering system. Easy to install and makes a huge difference.

@danneubauer6474 2 года назад

Got a link for something like what you're talking about?

@justinbridge5570 2 года назад

I’d like to know a link too

@sirwolly 2 года назад

I answered this question several times and it always got deleted.

@Tom-sg4iv 2 года назад

@@sirwolly it’s almost impossible to post links to anything now, only porn sites and scammers can successfully do it.

@mn-mh6uy 2 года назад

I have the Pentair one from Home Depot. But i think it’s identical to the Pelican and other models. There’s multiple variations. I have a 3 stage unit with a filter, then a larger carbon tank, then a water conditioner. They have a UV light option but it was only recommend if you’re on well water. It eliminated the chlorine smell in our home water supply. And the water taste great.

@pondacres Год назад

On mine, recommendation in manual is to do this once/month, but just drain off a few gallons at a time. I drain off for about a minute and call it a day. I just connected a short hose and route it to the same drain that the condensation from the furnace drains to, just leave it there...makes draining once per month a breeze.

@MakeMeThinkAgain Год назад

This was great. BUT when I had the problem you describe at the end with the valve, just capping it wasn't enough. It was leaking out of the valve itself. Fortunately, in my case it stopped after a couple hours -- which is a mystery. Unfortunately I did a crummy job of flushing it and would like to do something more like you've described here, but I'm afraid if I do it won't stop dripping and I'll need to call a plumber.

@brianbradford3483 2 года назад

Wife says we got brownish orange water in the sink with Cold water. And a few times with hot water years ago in the bathtub. I'm thinking it was just the lines out in the neighborhood being worked on but thankyou for this video! I probably really need to do this! I will probably get a big boost in hot water capacity too.

@sonoftheredfox 2 года назад

I did this yesterday. So easy! It took about 15 minutes for the water to get clear. My water heater had one of those plastic valves. Had to use a flathead screwdriver to open and close the valve. Water was thick gunky brown at first, but now nice and clear. I think the water heater is about 15 years old, and as far as I know never been flushed. Well water....don't know if it would have been better or worse on county water.

@Blakehx 2 года назад

Do you have any suggestions on a whole house water softener or filtration system?

@jesusgjchuza6491 2 года назад

Super 🤟🏼🤝

@user-em6ie2be7x 2 года назад

I was planning to buy a New Water Heater...Thanks for the Video on a better way to keep it clean.

@ejonesss 2 года назад

if you have one of them refrigerated water tanks (yes that is right there is a refrigeration unit with compressor and freon gas doing the heating instead of gas or electric heating elements). refrigerated water heaters have a heat exchanger that takes the heat from the compression of the freon gas and puts it into the water. such water heaters are even more expensive as they have a refrigeration unit but supposedly they are a lot more efficient and can save money and repairing one of them or replacing one can be quite a bit maybe over $2000 or even $3000.

@bmay8818 2 года назад

When I installed my water heater, I replaced the junk plastic drain valve with a real (brass) one, knowing about that problem. I'm glad you mentioned that concern!

@milesparris4045 2 года назад

I used to work as a plumber, and it was really common that the PoS plastic valve would break. I've had them break halfway open, full open, and once completely broke off. My water heater was made in 1986, still works fine, but has probably never been flushed and has the plastic valve on it. I'm not touching it, I'm just going to replace the whole heater in the near future.

@bmay8818 2 года назад

@@milesparris4045 I really wish they'd put real ones on at the factory. I get it, most people never use it, but still. And yeah, when it comes to ancient water heaters, it's a case of leave it alone until it dies.

@milesparris4045 2 года назад

@@bmay8818 I'm sure they don't put "real ones" on because of cost, and you're right, most people never drain them.

@ianmackenzie686 2 года назад

That brownish water I don't waste by using it on flower beds and lawn. Free dissolved minerals.

@ianmackenzie686 2 года назад

@@nickg9021 Of course I allow it to cool. But thanks! 😁

@stevenshircliff393 2 года назад

Great video! Are you Kipkay?

@josej-h1471 2 года назад

Can you do a review on a gas heater? Thanks

@williamrucki9293 2 года назад

Do you have geothermal heat? I’m looking at all that extra plumbing and wondering if your geothermal heating system also heats your potable water.

@bluej511 2 года назад

Our water heater in France has the in and out on the bottom, it still rusts over lol.

@EastCoastReefer Год назад

Would you please do a video on RO/DI filtering systems for drinking water? I’m currently using the Zero Water filters and it’s costing a small fortune, and they no longer last as long like they did many years ago. Thank you 🙏!

@mikecon7634 2 года назад

Tks SC

@NeverEnoughRally 2 года назад

Don't forget to replace your anode rod!!!

@Tj-co2ww 2 года назад

Thanks. I was wondering how to flush my water heater since it’s in a basement just like yours.

@johnchargualaf6599 Год назад

Thanks for sharing. I need to flush my tank has brownish color water through the faucet. my question is you mentioned you don’t have to turn off the power to do this procedure. Just attach the hose open the valve and drain. Is this correct?

@tawnihaynie1065 2 года назад

Cool

@Swenser 8 месяцев назад

How would you store used heat pump all in one water systems. Thinking of spraying rp7 on connectors and inside water container to keep any corrosion at bay. I will take out anodes and inspect them and replace if necessary. I'll leave ports open for air to circulate.correct? Or...

@pouchy400 Год назад

Have you heard of turbo Tank Cleaner? And would you use it?

@ronniemaeker9102 Год назад

Here in West Texas, if you get 10 years from a water heater you did great...most are 6 - 8 year life...

@TheLawngineer 2 года назад

Got a video about replacing the sacrificial anode in the tank? If not, might make for a good video.

@talononeguy 2 года назад

I was thinking exactly that and the fact that a large amount of scale has probably already built up on the heating elements thus reducing efficiency. A simple flush won't take care of either of those items, but a flush is better than nothing.

@MrWalksindarkness Год назад

did you use a special hose rated for hot water or anything? this is what I am worried about, the hose failing because it isn't made to run hot water and having issues with all that water in my garage

@Mist-Pro 2 года назад

That tank doesn’t look 12 years old! Congrats on the new house!

@tennesseeobservations 2 года назад

One in the house I'm working on now was 20 years old and it was never flushed and oddly the water was clear.

@eosjoe565 2 года назад

@@tennesseeobservations Ours is 15 years old and water is crystal clear. Never been flushed. It SHOULD have been, but was never done.

@chrisryan8863 5 месяцев назад

Hello. I am in NH too and appreciate your channel. I just wanted to confirm I understand your method. You are not turning anything off, correct? So you leave both hot and cold water valves on, as well as the pilot (if gas) or electricity (if electric)? And you make no adjustments to your furnace? The only thing you do is open the water spigot/drain valve on the bottom and drain the water while the unit continues to run as normal, correct? I have seen other methods suggested on you tube where they do shut off the hot water valve, etc so I just wanted to make sure I understood. Thank you!!

@dan5660 5 месяцев назад

Thanks for this- began to hear poping noises in garage after running hot water & had no idea what was happening.

@peterpowers4851 2 года назад

You should also be testing the pressure relief valve while you do thay.

@SilverCymbal 2 года назад

I will definitely be checking that one, but I will do it separately. If it still holds I will be amazed.

@blakebell2612 6 месяцев назад

Do you have to use a garden can I just put it in a bucket?

@jbmar-jx7uv 2 месяца назад

great job! y didn't u shut the gas off like they show in other vids?DIY THANKS

@AM2PMReviews Год назад

Do I need to turn off or unplug mine?

@BattleToads 6 месяцев назад

So you don't have to change any settings or turn off the water or power? Just hook up a hose and open the valve to let it drain?

@uhhh684 Год назад

if i hear dripping when the water heater is going what can this indicate? Should i continue to do this?

@mackendw 8 месяцев назад

just finished doing this on my mobile in florida...the tank was a 2005 vintage unit and I doubt it was ever flushed. there was probably 5 lbs of calcium in the bottom coming out. drained and flushed it several time before I finally got clear water. all the taps in the unit were jammed with small particles.

@zmjackson1 2 года назад

Nice vid! Too bad coins aren’t coming out!!

@lunatikk1967 4 месяца назад

Did you do this flush while the tank was under pressure ?

@GoogleProd 9 месяцев назад

You wont damage the the heater by not turning it off while your draining it?

@melanie010203 Год назад

Wanna come the Asheville NC? Room and board to do this to our 2 acres….😊

@bobamato4052 9 месяцев назад

Why not do a video about changing the anode rod? Pretty simple thing to do for a backyard parts changer

@dollofshadows1703 5 месяцев назад

I must say, I haven't seen this method of opening the drain valve while the tank is working. It sounds like a good idea in theory, but is this safe to do? Seems a little risky...

@drscopeify Год назад

It might also be worth checking out the anode rod condition which is very important but it can be a complicated process.

@jmodified 10 месяцев назад

Complicated because on modern water heaters you usually have to pry off the metal cap then cut off the insulation over the top of the rod.

@koshnaranek2317 6 месяцев назад

And his after 12 yrs or more is d efinently eroded away to nothing.

@DashPar 9 месяцев назад

“Hot water heater” - Why would hot water need heating?😂😂😬

@peterdang9475 2 года назад

Just replaced an elective 12 year old 50 gallon water heater tank yesterday. It was $700 from Home Depot for a Rheem with a 9 year warranty.

@alstevens44 2 года назад

$700 with installation

@DeadEyeRabbit 2 года назад

$7-1000 installation

@willboudreau1187 2 года назад

An idea for a future video - remind viewers at the same time they're flushing they should be replacing the sacrificial anodes screwed into the tank from the top, and if they're shopping for a new tank, to ALWAYS buy one that has anode(s) - it costs more but it prevents corrosion in the tank (different than rusting).

@michaellewis6569 2 года назад

This. A new anode rod is $30-40 usually and replacing it is simple. My first home I replaced the rod shortly after we moved in and the tank was about 11 or 12 years old already. I replaced it again about 4 years later and sold the home about year later with a 17+ year old water heater. I am surprised that there is no floor drain there next to the tank.

@marciamarcia7449 2 года назад

what annode are you talking about? He's showing a simple task of just draining..wtf

@libbyd1001 2 года назад

@@marciamarcia7449 many water heaters have a sacrificial anode rod that deteriorates so that the metal of the tank doesn’t. Even though the inside of most tanks are coated to decrease exposure of the metal to the water, often micro cracks still allow water contact with the metal that will rot them out. You can search RU-vid for water tank anode rod and see what it’s all about

@michaellewis6569 2 года назад

@@marciamarcia7449 look up "water heater anode rod" if you like. Replacing it every 3-6 years is the only other maintenance (in addition to flushing every year) that a tank type water heater needs.

@willboudreau1187 2 года назад

@@marciamarcia7449 Some tanks come with sacrificial anodes, apparently the one in the video does not.

@TDDoooOOOooo 2 года назад

Turn off boiler before cleaning or the heater will melt itself down.

@Dan-ef4jz 2 года назад

Only flush the tank if it’s been Routinely flushed. If it’s been 5-10 years and never flushed just leave it be or you could spring a leak and cause more headaches. Replacing the anode rode every 3-5 years is a much better alternative and preventative measure

@wwiiinplastic4712 2 года назад

That sounds similar to the old transmission fluid rule: If it never got changed by the schedule just leave it in until it dies as the change could upset the equilibrium that held the worn parts together or something like that.

@arakwar 2 года назад

So, if I plan on replacing it since it’s more than 10 years old and came with the house with no maintenance history, I could try it and it if leaks I just replace it. Otherwise, new anode and I’d be good ?

@Dan-ef4jz 2 года назад

@@arakwar you can try that. Or just do the anode road. If you spring a leak you’ll be out the whole tank but if it’s ten years old it’s near the end of its life

@bh6984 8 месяцев назад

@@Dan-ef4jz Can you elaborate on why it is risky to flush a tank if either it hasn't been flushed routinely or if you recently bought the house and don't know the maintenance record? If it hasn't been routinely flushed, then there could be dramatic sediment build up....but how would attempting to drain it now cause a leak? Thank you for clarifying.

@supernovahk19 Год назад

Mine water heater never had its tank flush for 26 years, finally the TP weld sprung a leak & I had replaced. The water from the new water heater, had a lots of air and air bubbles and pretty milky… I will wait another couple of days, if it doesn’t improve, I will call the plumber back.😢

@Huelogy 2 года назад

After you drain it you could open the cold water valve so it hits the bottom of the tank and gets some more sediment out, just another tip!

@DanteYewToob Год назад

How do you do that? Is there another valve on top? I started draining mine and it was really bad for almost 10 minutes so I stopped until I got some new information and advice. I live in FL and have pretty bad water… I have filters on my sinks and showers but even still the shower makes your hair feel crunchy and gross… I moved here recently and so I definitely need to deal with this now…

@g4tnewnewg4t48 2 года назад

That valve rarely closes without leaking.

@meffffy 2 года назад

I have a utility sink about 8 feet from my hot water tank in my basement. Would the water pressure be enough to "pressure flush" it? I have a hose I would trim to fit so there isn't useless hose for the water to flow through.

@beerbeforebreakfast 2 года назад

Yes. It's city water pressure as long as you keep the valve on that feeds the cold water in side.

@meffffy 2 года назад

Ok that's what I thought, of course the hose bib on my tank is plastic lol

@33rexify46 2 года назад

How’s the lawn doing??

@SilverCymbal 2 года назад

Coming along many videos on that coming very soon.

@spocksvulcanbrain 2 года назад

An even more important maintenance chore is to check the anode rod and replace it if needed. No amount of flushing the tank will help if the insides of the tank are being dissolved away. Also your comment about not wearing shorts is wrong. Shorts is better. If you get hot water on your legs, it will easily mover through denim or other cloth material. Plus it will STAY there even while removing your pants. Better to have exposed skin where the water won't be held and where cold water can be applied directly. If applied to hot, wet cloth, the cold water has to cool all that down, then seep through the cloth before it can cool the skin. Best to wear something like fishing John's which are waterproof. Better yet watch what you're doing.

@richradillo8085 2 года назад

👍👍

@_Yep_Yep_ 2 года назад

Cold water heater.

@nellth7136 Год назад

❤

@khmerjamesgoodness8712 Год назад

👍👍💕

@richardjones1183 Год назад

Did you rent the pump? If so who rents them.

@casecracka6770 9 месяцев назад

I have a tank that has been in service since 1988 and I have never done this. I am definitely not touching it.

@geod3589 2 года назад

I know mine needs flushing but I cannot get to it.

@bowtoy 2 года назад

There is a breaker for that water heater!

@james10739 2 года назад

I'd just turn off the breaker to the water heater till I was done anyway

@amyn64 2 года назад

I have been using the valve at the top top drain it once a year. I’ll try the other method.

@gbcardo4544 2 года назад

Yes you must. You are only draining clean water. The point of flushing from the bottom is to get rid of debris that settles at the bottom of the tank.

@cindyhenry1410 2 года назад

“Don’t do this wearing shorts” but the guy in the video has shorts on!! 😂😂😂

@PNMarkW2 2 года назад

How do you think he learned you shouldn't do this work in shorts? 😂

@KBOSGroundAgent 2 года назад

Yeah, just hit the breaker

@lithiumsolardiy-morgan192 2 года назад

Dear Silver, This is Enla from Aolithum battery, our new 12V100Ah batteries have been in stock. I have sent you an e-mail to confirm the release date of the video. If you are busy with other projects and will delay the post of the review video, please let me know. Tks.

@rrome6178 2 года назад

Sorry, I’m confused - you attached your hose to simply get the water outside, right? You did not use it to fill up the water tank, correct? The water came on and simply filled the tank as needed which helped flush it out using only as much water as was needed, not emptying the whole tank. Is that correct? Obviously after watching your video, I feel the need to flush my tanks. I have two that run in tandem.

@garyallman3039 2 года назад

Yes, he was just running it outside.

@KRISIS1451 5 месяцев назад

Probably safe to set the gauge to vacation before starting this.

@mk8530 Месяц назад

"you might not want to do this is shorts": Proceeds to wear shorts.

@PKforBankLoot 2 года назад

If using natural gas should you set it to pilot instead of just leaving it to whatever temp is set while letting the water run through the tank?

@LessThanHandy 2 года назад

Anyone know the answer?

@mandov5916 2 года назад

I don’t see why not. That’ll prevent the heater from kicking on as you’re flushing it.

@DeadEyeRabbit 2 года назад

Or vacation mode

@garyallman3039 2 года назад

That is what I would do. If you are doing it the way he did, where the inlet water stays on and the tank stays full, it doesn't really matter. If you turn the water inlet off and fully drain the tank, you need to turn it down to "pilot" until you refill the tank.

@SaratogaJerry 2 года назад

"Now you can use your own water pressure to push ..." 1:33 Please elaborate, how are you using water pressure to aid in flushing? Are you also running your hose to pull water from your water heater? Or maybe forcing water back through your heater drain hose to agitate the contents?

@Greg29 2 года назад

Yeah it seems like something was left out there.

@williamrucki9293 2 года назад

He never turned off the water to completely drain the tank so the tank still had full pressure from the well’s bladder tank. The water had roughly 40 psi behind it instead of 6 feet of head if the water were off and it was gravity draining.

@patperalez3409 2 года назад

He should have used a full port 3/4” ball valve and when your flushing the tank you are using the incoming water pressure to push out the sediment build up in side the tank. Turn on the valve for 5 minutes then off for 5 minutes then repeat the process 4x every 6 months.