hi, warranty?? that after installing the speedbox 1.1, the bosch system disables the tuning and puts the bike into emergency mode after driving 100-200 km. Or is the bike owner willing to take this risk??? Can you take responsibility...? Thank you for your respectful reply
Hello. If you follow the recommendations on our site, limp mode should not appear. If you take the e-bike to a service station, uninstall the SpeedBox first so that your warranty is not compromised. Otherwise, the e-bike owner is responsible for the warranty. Thanks for understanding. www.speedbox-tuning.com/p/p-speedbox-1-1-for-bosch-smart-system#1922
Is it possible to set your own key combination to activate the tuning in order to hide it better? Is it possible to switch off the activation via the walk function?
Hi. Unfortunately, the combinations on the display cannot be changed. However, for the version called B.Tuning, Tuning Invisible Mode can be activated in the SpeedBox App. After this activation, it will not be possible to control the tuning on the display, but only using a mobile phone.
Hi, First of all, thank you for development of such a nice decice. I am an owner of the speedbox 1.0B. Can you kindly tell me the difference to the 1.1B? Thank you
Hello. Thanks for your feedback 🙂 Generally, SpeedBox has 1.1. a slightly different way of communicating with an electric bike. It has the ability to set its own maximum speed. Compared to the previous version 1.0, it does not show real speed. The displayed speed is about 10 km lower than the actual speed. We also recommend not to increase the maximum speed setting above 35 km/h. It is one of the recommendations to avoid the risk of tuning detection.
Hello. There are many aspects of a Smart System that can affect tuning detection. That's why we try to prevent them. A maximum speed of 35 km/h is one of the recommendations.
Buenas tardes, Tengo una Cube Stereo Hybrid 140 ABS con motor Bosch CX de generación 4. La bicicleta lleva el Smart System y está actualizada a la última versión y dispone de sistema de frenos ABS desconectable. ¿Me serviría el Speedbox 1.1?
Hola. Si tiene un sistema ABS conmutable, el SpeedBox debería funcionar. Actualmente también hemos actualizado el producto a la última versión 11.13.0. En algún momento de la próxima semana estará a la venta la nueva versión.
@@SpeedBoxTuning Hola. Efectivamente el ABS se puede desconectar en mi bicicleta (tiene 3 modos : OFF, trail y allmountain). Supongo entonces que debería de funcionar si he entendido bien.
unfortunately after 5 months and 800 km, I also got the famous 524001 error for the first time :(. I tried to apply all your recommendations as good as possibly on the speedbox 1.1, but it still got detected. Now wondering what I shall do. First I will need to cycle for 90 minutes to fix it again.
Hello. 90 minutes is the maximum. In practise, a few tens of minutes are enough. You can interrupt the ride. After that, we recommend riding another 10 km without tuning on. Change gears and assistance modes while riding. After that, the detection will definitely disappear.
Es geht auch deutlich schneller, aufgrund der erhöhten Gefahr der Tuning-Erkennung empfehlen wir jedoch, diese Geschwindigkeit nicht wesentlich zu überschreiten.
So basically, we install a speedbox and all the smart functions (kilometers, range, etc.) register the wrong data? In addition, during the control, it is very easy to detect, after all, police officers are not morons and show this video in training. All tuning should be based on raspberrypi, everything should be converted on the fly into correct data, and the method of activation through NFC etc....
It ay worth the doe for 6mph more, as this is what they recommend… if you go higher with the speed increase you will fuck your bike up unless someone can tell me different 🤷🏾♂️
Hallo Team speedbox ich habe die 1.1 Version. Nach ca. 1 Monate kommt der Fehler 524001 jetz kann ich 90 Minuten lang in Notfall betrieb treten nach dritte mal war’s das und ab zum Fachhändler. Ich finde für so viel Geld das ist einfach nicht akzeptabel. Hat jemand eine Idee für mich? Gruß Geri
Hello I already have a 1.0 speedbox. I found out about the software update late, and I updated to 12.13.0 Maybe they will develop another type of speedbox (chip) for this type at some point? What will it be used for again?
Hi. The previous software update to 11.13.0 by the manufacturer Bosch was a big complication for all tuning manufacturers. New chips were easily modified, but chips made before 05/2024 are not compatible with the software anymore. At the moment we would recommend the SpeedBox 1.1 for Bosch, or the SpeedBox 1.1 B.Tuning for Bosch (with Bluetooth and compatible with the SpeedBox App).
Hello! Quick question: last week I bought a Cube Longtail Hybrid Sport (Kiox 300 and Bosch Cargo Line) and I would like to tune it. Based on the information in your website, Speedbox 1.1 and 1.1b are not compatible with Bosch Cargo Line gen 4 motor. Will you release any new product soon for Bosch Cargo Line gen 4? Thanks in advance!
Hello. The combination of Cargo Line motor and Smart System is not widely used, but our product SpeedBox 1.1 (B.Tuning) for Bosch is compatible with your e-bike 🙂
Hello there, Can someone explain me whats the difference between the Speedbox 1.0(b) vs Speedbox 1.1(b)? I just bought 3days ago the 1.0(b) and saw today this Video where they present the 1.1(b). :(
Hello. Manufacturers of e-bikes with Bosch motors and the Smart system devote a lot of effort to detecting tuning. That's why we developed the new SpeedBox 1.1 product with "simplified" communication compared to the previous version SpeedBox 1.0 to eliminate the risk of tuning detection. More information can be found on our website www.speedbox-tuning.com/p/speedbox-1-1-for-bosch#1922
Hello, You just need to go to the menu for the wheel circumference, you don't have to change anything. This step is necessary during installation, after that it is not needed 😎
Hi. If you have the tuning installed, the WALK function is still functional, but you need to hold the button for at least 3 seconds to activate the function. You will usually see on the display that the function is loading.
When you have driven your bike with the speedbox activated and then put your bike away and let it go to sleep/stand-by. Do you then have to activate the speedbox again when you want to go for your next ride or is it still activated?
Hello. I'm not sure if I understand your question correctly. The maximum average speed of 35 km/h is recommended based on our experience. At that moment, the electric motor "thinks" it is going at a maximum of 25 km/h. Once you finish your ride, or if you pause for a few minutes, the actual kilometers traveled will be recalculated in the electric bike. Afterwards, the average speed and the actual distance traveled should align, which should prevent detection of the tuning.
@@SpeedBoxTuning For example, I set the limit to 35 kilometers per hour. If I exceed this speed without the motor, is there a chance that the system will recognize it?
Hello. Do not worry 🙂 You can set the maximum speed limit by switching the modes from TURBO mode three levels down and then three levels up: eMTB - TOUR+ - ECO - TOUR+ - eMTB - TURBO. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by activating/deactivating WALK assist function shortly or by turning the rear wheel 360°. The value of 2.5 km/h on the display corresponds with the limit of 25 km/h, 3.0 corresponds with 30 km/h, 3.5 corresponds with 35 km/h etc. The last displayed limit will be saved after 15 seconds of inactivity.
Hello. It will work, but if you want to change the set speed, you have to look at the data in the Flow App. Or you can buy SpeedBox 1.1 B.Tuning for Bosch. B stands for Bluetooth. This product can be paired with our SpeedBox App and you can control everything with this app.
Hello. Please avoid. Bosch Smart System Software version 11.13.0 causes incompatibility with the products ordered before 05/2024. We highly recommend to avoid downloading of this update. Please disable automatic updates in the eBike Flow App.
@@SpeedBoxTuning I was not talking about the Bosch smart system, but about the enviolo automatiq. Which is a shifting gear that can also be updated separately via Bluetooth. So my question is, is it safe the update my enviolo automatiq shift system?
Guten Tag. Dieses Produkt ist für E-Bikes mit Bosch-Motor und Smart-System gedacht. Sie erkennen dieses Smart System beispielsweise daran, dass Sie ein Kiox 300- oder Purion 100-Display besitzen.
Hello. Thanks to the new SpeedBox 1.0 software updates, the error 524001 occurred much less than at the beginning of sales. And in the case of SpeedBox 1.1, the error appears even more rarely.
@@JoeSkiddGrass When Bosch detects tuning (if a firmware update is performed or if the mileage count after each long ride is not followed), it disables the motor assistance. It is necessary to ride for several tens of minutes without assistance.
@@JoeSkiddGrass When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip. We do not recommend updating the software of the e-bike.
Unglaublich das es keiner hinbekommt das samrt System zu hacken .. ich hatte die speedbox 1.0 kein erfolg .. puretune kein erfolg.. und mit der speedbox 1.1 bin ich auch skeptisch..
Hallo. Das Smart-System von Bosch ist recht komplex und Bosch verbessert die Tuning-Erkennung ständig. Aus diesem Grund haben wir eine völlig neue SpeedBox 1.1 entwickelt, die auf einer anderen Art der Kommunikation basiert. Wir testen dieses Produkt Ende des Sommers und haben bisher keinen einzigen Fehler im Zusammenhang mit der Tuning-Erkennung festgestellt. Bitte besuchen Sie unsere Website www.speedbox-tuning.de/p/speedbox-1-1-fur-bosch#1922
@@agent00bodensee26 Es geht auch deutlich schneller, aufgrund der erhöhten Gefahr der Tuning-Erkennung empfehlen wir jedoch, diese Geschwindigkeit nicht wesentlich zu überschreiten.
I had 2 detectons in previous 1.0b before i returned my speesbox. 35km/h would be enough for me but the other hassle you need to do to awoid detection everytime you stop riding is not good. One time you forgot to do those "manouvers" and its game over.. limp mode again. Maybe someday there is a product wich work without a risk of detection..
Hello. We are aware of your preliminary considerations regarding our product. However, Bosch systems are deeply committed to detecting tuning, which is why some unpopular measures are necessary to prevent tuning detection as much as possible (for example, the recalibration of mileage - „the countdown“). We recommend increased caution if another manufacturer claims that countdown is not necessary, as it is technically impossible. Recalibration is always required, but for some tuning models, it may occur discreetly in the background.
Dobrý den, chtěl bych se zeptat, mám elektrokolo grand canyon on 9 s abs systémem, jaký mě doporučíte chip tuning na tohle kolo .děkuji za odpověď. Rosa9
Dobrý den. Domníváme se, že kombinace tuningu a ABS není technicky možná. Každopádně bychom tuto kombinaci ani nedoporučovali z bezpečnostních důvodů. ABS při brždění bere údaje z rychlosti e-kola a v případě tuningu by mohlo hrozit nebezpečí úrazu.
@SpeedBoxTuning what if I have already done the firmware update how high would be the risks of detection, has anyone tried it with the new firmware update, 3 of my friends have them on there bikes they got the speedbox 3.0 installed they fly and I'm sitting on 25km 😢 plus I spoke to one of the guys from the bike shop and he said that all of the bikes are already updated before leaving there shop
@@tomejovanovski Hello. I'll try to explain in order 🙂 The 11.13.0 update does not concern tuning detection, it will only disable the activation and deactivation of tuning. It basically devalues our product. However, we immediately carried out a successful update of our products and are now releasing a version that is compatible with the latest update. If you have Bosch Smart System and update 11.13.0 already installed, you can order SpeedBox 1.1 for Bosch at our e-shop www.speedbox-tuning.com. We will ship from next week.