Hi. Unfortunately, this product is not compatible. We are still developing and testing a new product for the EP801 engines, it will be on sale this fall. Thank you for your understanding.
Hi. Shimano doesn't really provide a lot of space to place the chip and cover the motor. But it is definitely possible, we tested it personally with our employees :-) We recommend a little patience. Take it as a challenge.
@@SpeedBoxTuning thanks for the reply, I did eventually get it in with a few taps from the end of the screwdriver 😂… it is great btw it’s made the bike what it should be, would definitely recommend to anyone thinking of buying one
Hi I have Shimano EP8 E800 motor from 2024 - will Speedbox 1.3 work correctly with this motor? Is it guaranteed not to get error on the bike that leads to engine blocade?
Hello. Yes, SpeedBox 1.3 will work great. Tuning detection does not occur with these motors, you do not have to expect an error ☺ More product information can be found here: www.speedbox-tuning.com/p/speedbox-1-3-for-shimano#1623
I have a Husqvarna MC7 with EP8 motor. Will this work for my bike. Right now I am limited to about 19.5 miles an hour with assist, after that I am pedalling on my own?
Ya need to install several NOTICES/WARNINGS. Doing "This," is gonna consume more battery juice. Especially if you are a heavy rider and/or lots of ascents. And doing so seems to affect the warranty, as I have sent my EP8 for servicing and I had to pay out-of-pocket! And check your state laws on e-bikes. There are power/battery restrictions. Lastly: If the motor works fine, why mess-with-it?
Hi. Battery consumption is of course higher when tuning is turned on and the highest assistance is enabled. If you want to save battery, turn on maximum power mainly on longer straights. We also recommend always uninstalling SpeedBox and clearing TRIP before visiting a bike repair shop to prevent tuning detection.
Bonjour, je viens d’acheter un boîtier pour mon canyon Neuron:on 7 et ça ne fonctionne pas. Tout est bien branché, la lumière est activée dans le menu et rien toujours limité à 25km/h ! 😢 qu’est ce qui pourrait ne pas fonctionnent ? J’ai la revérifier plusieurs les connections tout est bien branché. Que puis je faire ? Il y avait déjà une cosse rouge d’origine sur la borne +. J’ai dévissé et mis en plus celle du speedbox est ce normal ? Merci de m’aider.
Bonjour Monsieur, merci de nous avoir contacté. Le principe comment allumer la SpeedBox est suivant: les lumières dans la position OFF = la SpeedBx ON les lumières dans la position ON = la SpeedBx OFF Si vous avez les lumières allumées, la SpeedBox ne va donc pas fonctionner. Si les lumières sont obligatoires ou vous voulez les laisser allumés, il faut brancher la fourchette rouche (=le connecteur de la SpeedBox) dans la vis du Moins (-) et la SpeedBox sera toujours activée, ensemble avec les phares. Cordialement, Equipe SpeedBox 🙂
Hello. Try to check the connectors to see if they fit together perfectly. They are waterproof and need to be pushed together. Don't be afraid to use a little force. If the lights and display are on, the tuning is off. If the lights and display are off, tuning is on. If the tuning doesn't activate anyway, write to us at support speedbox-tuning.com or on FB, IG. Thank you.
I have the Shimano EP801 from Polygon Collosus n8xe, is it compatible? And do you have any info about the existence of the free e-tube port? Thanks in advance
Hello. We do not yet have a SpeedBox for this motor. We are currently starting to work on a product for this motor. Please follow our website speedbox-tuning.com or social networks on FB or IG.🙂 Thanks
Hello, First, please verify the full name of the EP8 motor. Shimano sometimes labels the EP800 motors this way, which are compatible with our chip. They also label the EP801 motors this way, with which the SpeedBox is not yet compatible. Thank you.
Hello. Both products are compatible. As for the name SpeedBox 1.3 B.Tuning, B. stands for Bluetooth. So the version called B.Tuning can be paired with our SpeedBox App 🙂
Hello. If the W101 error occurs on the SpeedBox 1.3, the motor should not lock up. Please try to check the position of the magnet or uninstall and reinstall the SpeedBox and check that the connectors fit together correctly. Or if there is no damage to any connector. Thank you.
Hello. Yes, it works with Canyon ON 7 with EP8 motor. Please check, if you have one free E-Tube port and then choose the variant "Standard" or "+E-Tube port" as was explained in the video :)
Hello. There is always a way to get at the wires. On some types of motors, the cover is very small, but all the wires are hidden under it. If you don't know what to do, send us a question with a photo on Messenger, IG or by email info@speedbox-tuning.com
If there is a problem with the bike and you get a warranty, can bike or motor company know if it is installed or not by looking at the log record? As far as I know, most companies don't apply the warranty if they know that they have unlocked speed limit.
Hello. Tuning installation is always a bit on the edge. But if no error occurs while driving, no one will detect that a SpeedBox was connected to the motor during diagnostics. If you take your e-bike to a bicycle service, we recommend that you always uninstall the SpeedBox from the motor first.
@@takuuu173 The "+E-Tube port" variant is intended for e-bikes without a free E-Tube port - usually e-bikes with one of these components: Satellite System ON/ OFF Switch Di2 (electronic gear shifting system)
@@takuuu173i have the Same bike how much is the highspeed vmax???? I think the transmission is too easy in the last gear…..is the speed over 23km/h on the display is correct??? or does it show the correct results over 23 km/h????
The presence of tuning does not interfere with updates. However, electric motors and software (firmware) are constantly evolving. For purely preventive reasons, we prefer not to perform updates unless they are necessary. Or first remove the SpeedBox from the e-bike, update the firmware and install the SpeedBox back.
Ok. Thank you. So in general terms it does not interfere. Probably best option then is if doing an update once every 500kms just remove it.. Also install uodates before putting the box on. I love the security feature of being able to keep the motor off and speed to 15km with a password. So when not using the bike keep it like this. Also I love the big screen so you can see the entire trip and motr funcyioning while biking on your phone screen. That is on the version that I can use with the Speedbox App.
Hello. If you have a free E-Tube port in your motor, the Standard version is for you. However, if you buy the version with the +E-Tube port, it won't cause any issues. Just leave one cable unplugged. www.speedbox-tuning.com/p/speedbox-1-3-for-shimano#1623
Allright. Only one question i have. My E bike is other as 8tnis in the video. May i dont have light turn on off. How can i turn on speedbox? Have alternatíve? (I have no e tube plug) Big thanks
@@csocsokecskemeti8992 Hello. If you do not have the light button activated from the factory, you have two options: a) have the light button activated at a service center b) purchase the version www.speedbox-tuning.com/p/speedbox-1-3-b-tuning-for-shimano#1639 with Bluetooth, through which you can pair the chip with the SpeedBox App. You can then activate/deactivate the tuning directly in the app.
@@SpeedBoxTuning i bouth standard. Today i install it. But something wrong. I got error. I do it same as a video show. Step by step. I hope i dont blocking my e bike forever
@@csocsokecskemeti8992 Hello. What specific error did you encounter? Could you please double-check the exact type of your motor? EP8 mark can be EP800, which is good. Shimano also labels EP8 motors with the full name EP801, with which our chip is not compatible. The e-bike will not be damaged, but the chip will not work.
Hello. If the lights are turned off, SpeedBox is activated. The chip can be deactivated by turning on the lights. If you want to use tuning independently of the lights, do not connect the red wire during installation, like that the tuning will be always activated. If you do not have lights on your e-bike, SpeedBox 1.3 will also be activated at all times.
@@SpeedBoxTuning So on the variant without the tuning - when you double tap the lights 2x does it make lights off- chip active and if pressed again x2, lights off chip not active? Or only lights off - active, lights - on not active?
I would buy this instantly if you could have it display the correct speed on the display. Why is this not possible? I'm definitely not mounting my phone to my handlebars just to view accurate speed.
Hello. Simply put: the electronic communication in the Shimano e-bike is complexly encrypted and it is currently almost impossible to completely eavesdrop on it so that the display shows real values. For this reason, we only produce the 1st generation SpeedBox for Shimano. The B.Tuning version offers many other features and benefits like real values, speed limit settings and other riding data.
@@SpeedBoxTuning Gotcha. Unfortunately I'd rather have an accurate speedometer reading than an unrestricted bike, but I do appreciate you taking the time to reply and explaining what the limitation is!
Ça ne marche pas ça ! Il faut éventuellement downgrader et passer par une application payante mais beaucoup ont eu des gros problème avec ça, obligé de finir chez un revendeur Shimano pour reconfigurer le moteur. Je ne jouerais pas. Mais c’est dommage.
Hello Sergey. No, for Shimano is not possible to display a real speed for now - only up to 23 km/h. You can see the real speed in the SpeedBox App if you order the B.Tuning version :)
Buona giornata. La variante "+E-Tube port" è destinata alle biciclette elettriche senza una porta E-Tube libera, di solito biciclette elettriche con uno dei seguenti componenti: Satellite System ON/ OFF Switch un cambio elettronico Di2
Hallo, Hans. Das Abdecken des Motors mit dem installierten Chip ist eine kleine Herausforderung, aber definitiv machbar. Wir empfehlen Ruhe und Geduld zu bewahren 🙂
@@SpeedBoxTuninghallo SpeedBoxTuning Team, ich würd gern mal telefonischen Kundenservice haben. Würde gern ein Artikel bei ihnen kaufen, bin aber noch nicht schlüssig welches ich genau benötige.
@@magicsork657 Hello. So you can choose this one www.speedbox-tuning.com/p/speedbox-1-3-for-shimano#1623 or this one www.speedbox-tuning.com/p/speedbox-1-3-b-tuning-for-shimano#1639
@@SpeedBoxTuning all good! Another question- I just got the 1.3B for an ep8 and I was wondering if the package comes with a code for downloading the app, or if it’s a seperate purchase for the app?
@@hankscorpio1953 No way, the app is free on Google Play or the App Store. All you have to do is enter your PIN and service password. Make a note of this data somewhere and don't lose it :-)
@@SpeedBoxTuning oh sweet, that's mad. One last q, does the light have to be connected to the bike for the light button to activate/deactivate the chip? I've removed the light from my bike but still have it if it is necessary. I figure it's not, but just checking.
Hello. In general, we do not guarantee the continuation of the warranty on the e-bike. But: We recommend not to perform software updates while SpeedBox is installed. If it needs an update or a service visit, first uninstall the SpeedBox from your e-bike. Then the tuning should not be detectable and you don't have to lose the warranty.
Hello. 1) Can you check if you have a free E-Tube Port in your motor, please? If so, you can use the "Standard" version. If you do not have a free E-Tube Port, the "+E-Tube port" version is intended for you. 2) The connectors must be connected really tightly so that they do not come loose when the motor is covered. Can you check this please? 3) If you need advice, you can contact us on the chat at speedbox-tuning.com or on Facebook or Instagram. Links are in the video description.
@@naya92 Hello. We are currently developing a chip for the EP6 motor. Based on experience, we cannot predict how long the development will take. Sometimes it's 4 weeks, sometimes months. Please follow our social media or website. Thanks.