Echo GT200R Trimmer starts, but won't stay running 

I made a mistake in the video, At 10:36 I mentioned that I turned the L screw, But unfortunately I proceeded to turn the H screw instead. I should have turned the screw on top of the Carb, which is where the L screw is. It still made a slight improvement, but I wanted to mention that I had made a mistake.

Any Echo is a good choice but an older one is the one i would want. I worked on a friends Echo trimmer and it was a pleasure to work on

I learn a good bit from your channel , I also like how you narrate everything straight to the point ! Good job !

Nice repair, good replacement of fuel lines and picking up that the shaft wasn’t in the housing.

Excellent video. I always try to fix to older machines if not completely worn out. Also Echo is the best out there and easy to work on. Thanks

I have the same trimmer I have been using it for years and I didn't think there was an adjustment for them ! Wow now I know thanks for that 👍 I would do the repair because of how reliable this machine is !

I love the older Echo equipment. Fixing this machine was definitely worth it.

I was planning on fixing my own tonight! Great timing!

I purchased a similar machine last summer for a few dollars and it was the best decision I made, it has been running like a charm. Prior to that I had purchased a new one for a lot more money and kept returning it to the store since it didn't run well, until I returned permanently and bought the used echo. The used echo parts feel much stronger and better built. Thank you for showing us how to do the compression test, and the rest of repairs.

Nice trimmer. I like simple repairs like these.

I love echo products I work at an echo dealer and I have to say there product is are heavy duty robust and easy for the mechanic to work on

Worth it! Great video

I agree with you. Nothing can beat some of the older models.

your videos are so helpful I highly recommend fixing up a Kawasaki line trimmer. they might not be the most powerful but the power out put is shockingly good. keep up the videos

I could not get mine to run, until you showed me the needle locations. Now it will Run and Idle. THx) for vid.

Excellent video

Once again you are The man 😎 got another machine back in running condition 👍

Echo? Always worth giving it a shot and trying to fix an older model. Just something about their NO QUIT attitude. My echo trimmer is 26 years old now and I only had to replace the metering diaphragm. (Hope I didn't jinx myself.) Awesome video as always, Home Garage.

Great video, Echo is a great brand and I'd go with fixing up an older model, nice work!

Absolutely fixing the older one. I did that for a family member that got frustrated and threw his (out of frustration) because it wouldn't start. The carburetor itself was broken in a couple of places. The main problem was the hard molded plastic piece that the throttle cable went into was busted, I probably could have jerry-rigged it but instead I got a $20 Chinese knockoff carburetor and just replace the whole thing. The package came with extra fuel Purge bulbs which it also needed, along with new fuel lines and a filter within 20 minutes or so his old beat-up echo was running like a scalded dog again 👍

Great video, i personally like repairing the older equipment hi e me alot of satisfaction when it's running great and makes me snicker when i see the ads for new equipment that I don't have to shell out the big bucks

I enjoy all your videos from all the different small engines you fix and bring back to life. I also agree that echo makes a great product. I am currently having a problem with my Echo SRM 210 straight shaft trimmer. About a week ago I noticed it was not running correctly and noticed the fuel lines and grommet were deteriorated. since I have had this trimmer for many years i figured it was time for some maintenance. So a went down to my local shop and bought new fuel lines and a Zama carb rebuilt kit. After changing all and restarting the Echo trimmer it started up fine. I was actually very lucky that it did not have to adjust any of the high or low screws since it revved and idled fine. But when it is warmed up and I shut it off and try to restart it, but it will not start. I tried chocking and un-chocking the trimmer and nothing. I took out the spark plug and it was a little wet from fuel. I tested for spark and it had spark. The only way I can restart this warm/hot engine is if replace the spark plug with a spare I have that is perfectly dry. It seems that after it warms up and it will not start if the plug is wet. Not sure what is causing the plug to get wet after shut down the trimmer. Any suggestions would be greatly appreciated.

I would have pressure/vacuum tested the engine before messing with the carb. If your crankcase does have a leak, you only temporarily bandaged it. I do like seeing people fixing anything old instead of throwing it away. Kudos for giving this line trimmer a renewed life.

I honestly probably would not be able to do the stuff I do with out this chanel, thank you home garage

Honestly, I love my echo trimmer for how it starts, first pull, every time. Even though it’s a curved shaft, the fact it runs so good and that I’m not that tall, make it perfect for me.

Absolutely best decision is to fix if one has the ability to do so. This machine may not have the perfect compression but may still last a long time. Great job. Thanks for the video's.

Great cheap fix! 👍🏻

Great video. I normally buy new everything, but have got a few free blowers or trimmers like this one that just needed a small amount of fine tuning.

It’s definitely worth fixing it🙏👍🙏👍🙏

In 2020 i bought a new echo trimmer, it's à GT-222ES i love this machine

Awesome tip on the drill bit technique. Can’t tell you how many pick sets I’ve ruined.

I like Echo products also one of my personal trimmers Is a Echo and I agree I would have tried to get this running also its a nice machine there

Good video as always. I had noticed that mark on the shaft was a little odd/off but didn't think anything about it. When you adjusted it and as soon as you started it I could tell right away that that was the the fix... lol I have to agree on the fixing this if it cost you very little to no money to get this piece of equipment along with fixing it as you know the brand new ones can cost upwards of $1,000.

(Wow). I learned something watching. Your videos are excellent, with clear explanations, and wonderful up close views of what you're doing. Thank you for making & posting this video. td\.

Out of all the gas weed trimmer I have, Echo are still my favorite. Echo SRM210 (same as above just stright shaft) is my go trimmer, get more usage than Echo 225. Echo trimmer seem to have the right balance of power, comfort, and weight compared to other trimmer including Husky/Stihl/Hitachi trimmer. Carb+fuel line delivery seems the be the most common issue with Echo trimmer typical of 2 stroke issue, rarely see Echo trimmer with blown engine.

Good job. Slide those fuel lines all the way up on to the barbs!

Usually it’s expected for a trimmer or blower to have around 75 to 100 unless it’s very Smokey or low in power I generally wouldn’t worry about it I rebuilt a pb 250ln echo and it had 90psi after the rebuild

Awesome

Definitely worth fixing. There's a reason you don't see these on the curb as often as newer, cheaper models. Tool like this will last forever if you take care of it. Also, maybe these older Echos just run a little different than I expected, but it sounds like it needs a little bit more carb adjustment. Seemed to be bogging when trying to rev it under load. Might wanna play around with that LSN a bit more.

My dad has an echo trimmer, now i think he should have gotten the multi tool attachment, for one the engine is a little bigger and that’s great for the attachments, but it also has a better reliability. When coming to a more demanding job.

While you were working on the carburetor you mentioned the adjustment screw on the throttle shaft as the high speed screw, but that is the low speed adjustment, and the other screw on the side of the carburetor is the high speed adjustment.

I've got a really old Echo SRM-302B-DX, it's nearly all made from metal, all the covers and even the guard.

Hey bro I personally think that fixing an older trimmer is better than buying a used newer model because I believe that they perform better than most of the newer models.

Yes I agree HG fix the the old one..👌

I’d fix one of those old Echos any day!

Love the echo trimmers, interested to see if the compression changed any after running it a little.

Echo stuff is the best. i have a bunch of it.

The L screw is the one on top and the H screw is under the purge bulb. You might see if the compression is higher now. I’ve noticed that 2 cycle engines that sit for extended periods don’t have enough residual oil in them to get a good reading. Seems to be running ok.

I’ve got that exact model, as well as an extremely old and rare SRM200 from the 1980s or 90s. The SRM 200 though is in desperate need of a carburetor adjustment, could you do a video on how to adjust the idle screws on a walbro carburetor to get it running properly?

So on the metering diaphragms how can you tell when ordering them which ones has the short stem in the center versus which ones have the longer Center stem? What different part numbers

Cool! So when you bypassed the purge bulb is it choke on - engine off? Thanks

Could you pls tell me the O.D. of the replacement line you used in this Vid. I've heard the cheaper fuel line kits sold online they don't use qlty fuel line so I'd like to assemble my own but I'm not sure what size the lines are ereplacementparts says the return line is 3mm x 6mm and the pick up line measures 3mm x 5mm very confusing as to which size fits best. I'm not trying to have constant fuel leak issues I'd like to do it rite the first time. Any advice is appreciated. Thnx

Stihl has all was been my choice of small chain saw or trimmer

Good idea to fix it. If you still want a new one you could sell this one or give it away.

Great Video. Do you have any repair videos on riding lawn mowers. I have a poulan pro and when I go to start it I hear clicking sound. Battery is charged and mower has GAS.. Thanks for your assistance

what is the proper spark plug gap that you would suggest for a brush cutter? love your videos!

Great video plobem I have tintan strummer works well then after 15 minutes stop you know why

I thought the high speed adjustment is below the primer bulb

Looks like a keeper to me...didn't really cost nothing to fix...and you've had it how long ?....lol.. See you on the next one Cheers 🥂🥂🥂🇺🇸🇺🇸🇺🇸

Hello i have a question about one of my weed wackers. It’s a Stihl fs 131r and it won’t stay running even with a new carburetor. I changed the fuel filter, checked the fuel line for any air leaks but it’s all well and the seals are not leaking as well. Any ideas on what i should check?

"I just don't like spending money," wish my wife felt the same.

What type of 2 stroke oil do u use ?

Mr. Home garage, i got a question, if engine compression is low(or not good enough), will it cause the engine not to hit the high rev? Its a gt-225(echo curved sharft trimmer) btw, recently new carb and spark plug

good job friend congratulations. a question how old is this machine?

Yep fix it up than buying one brand new as it works out like a better deal etc.

Where could I get parts for echo trimmers?

what does the h screw do

Yes sr

Good vídeo, I hace learned some

Does anyone know if i can change heads on this model i want a bump feed head?

Mine starts but the throttle doesn’t work. Any ideas ?

What editing software do you use?

How do you find all the free yard equipment

It’s hard to beat a $2.10 trimmer!

The engine will behave differently if it has no load on it as you can see here, as soon as the trimmer head got working again it sounded like it was slightly bogging. Although I am sure that you know this.

I'd go with the cheaper older model if the compression was good to very good. Otherwise, I'd go with a new Echo with a 5 year warranty.

Hey

I'm first again

FIX IT ! Echos are worth fixing

first

Still like the old Echo sound.