I think the crucial question is: how much heat does the van absorb? If the van is standing in the blazing sun at midday in summer, the solar energy input is so strong that such a small system cannot or can hardly work against it. Perhaps with a power connection and MaxMode. If there is no natural shade, you should try to stretch an awning, the height of the van makes this not so easy, but it is necessary. The Wave is only effective if two hoses are used for air intake and exhaust. If the hoses are long in the van, they can be insulated. Make sure that the intake air does not suck in the exhaust air. This is often done incorrectly in videos. You shouldn't expect too much. Even with a heat exchanger, the power consumption determines the cooling result - a mid-range car can pump over 10,000 watts into the air conditioning system - so you get an idea of what 400 watts can do.
I agree 100% with you! The van has to be cooled down, in shade for the eco flow to work correctly. In my opinion, it is still struggling to cool the entire space. It provides adequate cooling to a small portion, maybe 1/3 of the van. The heating option works much better at maintaining an ambient temperature throughout the entire van. Overall it’s kind of a pain to set up, looking to mount it permanently under the bed area and vent it under the van, so it will be easier to use.
@@shelterinplacezz I have a larger camper and the Wave 2. Without power from the mains, it's all rubbish in the long run. But if I have power from the mains, I can put a monobloc air conditioner in there for 300 dollars - it cools with 10,000 BTU and is a bit bigger
It is better to run it close to where you need it. I’ve tried both ways, on the passenger seat and on the counter..more efficient to keep it within a few feet
I’m going to be doing more testing…..in the middle of the day in direct sunlight it’s a struggle, but it will keep a section of the van cool, especially at night.
