Edelbrock VRS-4150™ Race & Street Carburetors 

Good job Edelbrock. Filling in the void that will be left when Holley goes full EFI.

Wow! Looks like Edelbrock really did their homework on these. Great adjustability. Nice job!

THANK YOU SO MUCH!!! THIS CARB HAS ALL THE BASIS COVERED!!! THANKS FOR SHARING!!!

Amazing carburetors great for any build that you do plan on driving on the street and drag racing on the weekends.

Great job Brent!

We are excited for these!

Ok, now i want a 4500 series design

I'm looking forward to trying one of these out on my 390.

Looks interesting, hopefully get to try one out someday.

I'd love to try one of these.

After playing with old school double pumpers on a tunnel ram and street driving it, I see so much about these that are just awesome. With a O2 sensor and some thinking involved, these are going to be unbeatable. I am tickled I haven't bought a Carburetor for my simple old school dual point big cammed 460 project as they just made the sale.

Looks like a killer carburetor

Jimminy, that's a lot of fricken jets!

The guys from Two Lane Blacktop would love this carb, they were always changing jets.

Ok Edelbrock, you've got my attention 🧐

Need to pull the bowls for jetting still…are parts interchangeable with a holley? AND where is it made???

commented & liked & subscribed. awesome new technology for carbs. lots of older stuff is not getting the tech updates. great job. 👍 what about ignition? any ideas?

Uncle Tony's Garage likes it

Wow nice

Cool, edelbrock made a holley

oh wow I must have one or two

It's a Holleybrock... 😀

I just picked up a new 1307 (750). Very nice carb, Very smooth power compared to the double-pumper its replacing, I attribute that to the very nicely done Annular Boosters. The only thing that was way off was the transition, it went from idle 13.0AFR to 15AFR, causing the motor to cough and stumble until the primary booster came in. I had to change the idle bleed from a 70 all the way down to a 42. I also tried a 36 IFR (from the stock 31), which basically had the same affect with the standard 70 idle bleed jet. I also changed the standard 4.5 Power Valve to a 8.5. The engine (445 Ford FE Stroker, Edelbrock Al Heads, RPM Performer, Comp Cam (230/236@.050, .530 lift) pulls clean and hard thru the power band at 12.5AFR, but at light load (cruise) it is pig rich at 10.5. I'm not sure what dial to turn to lean 'cruise' out? I've called Edelbrock Support twice with them telling me they have no literature on these carbs, so they have no idea what to do. This is pretty concerning and disappointing. Edelbrock? Anyone who has knowledge? Advise would be greatly appreciated.

Extra height only thing for me not much room with nitrous plate and air cleaner! Will buy one for my other car! Lots of cool things ✅

Will there be kits to convert it to blow through?

excellent tunability something I had to previously go to a carb builder to get. Looks like a lot of tricks from brasswell and BLP

Will there be a USCG approved marine version?

Atta boy!

I think the only thing not built into this from the start was capabilities for blow thru applications. But wow I can’t wait to see how this does on independent dyno testing. What’s the price point on this?

So is there a tuning class. E4150-101?

Also 2ndary optional Linkages “”

Is edelbrock going to come out with this carb with electric choke

When can they be bought and where

Where the hell can I buy one ?!

I assume (hope) it's made in the USA?

The way the venturies are wide like a salad bowl I'm willing to bet the CFM ratings are actually closer to advertised.

Noice!

What is pricing. And can they be made blow thru?

Looks great, but most people including Racers, can’t adjust a regular Holley correctly! Wait until they start monkeying with this piece! Lol

Any plans to add a vacuum secondary version?

Can you blow-thru this carb?

People are going to be in more trouble trying to tune it than you can shake a stick at.

Holley

Lol yey.. Edelbrock finally gets complicated..lol

wow at first i thought it was a ripoff Holley and it kinda is but this looks really nice. this is basically a modified Holley with all the tricks you would have to buy separately but with the Eddy its standard. if you really know how to tune a carb this is a one stop shop purchase. the fact that you can change Boosters on the fly without sending it to a carb specialist because of the required tools to press them in and out properly, this makes it more user friendly than the Holley. They really did their homework on this and im waiting for it to come available so i can by one for my BBC. the ONE thing i wish they would have redesigned is the way jets have to be changed, the need to take off the fuel bowl and swap jets with the risk of leaks is not only a pain in the ass but can be a danger at the track when making changes. Maybe drill 2 holes in the fuel bowl with plugs so you can stick a jet tool with a magnet inside without removing the bowls and breaking seals???? but I this is still a nice product and cant wait for mine. And for the people asking about Blow through Applications yes this will work you just need to make sure the jets and bleeds are calibrated correctly and add vent tube extensions to the top tubes and you can run boost. Thats all that really separates a standard race Holley from a blow through. You can even run this on Alky if you want to do the math and make custom bleeds and jets.

Eldabrock been beating Holley for ever now they really just knocked it out of the park awesome carb I need one

Its just a Holley copy

Too funny, there's more tuning than you can shake a stick at.

Okey shit... Iam going EFI... Iam going to be an old broke man before that carburator Will be jettet right on whatever i build, Jesus christ thats alot of jets.

Man, I Wonder who invented the 4150 and already has used most of these features… Hmmmmm

Looks like edelbrock took a page out of the Chinese handbook. Just copy Holley carbs.

So edelbrock copies holly. Hmmmm wonder how holly feels about that

So you just copied a holley carburetor?time to hire someone who can come up with a new carburetor not just copy another piece and say that you have improved it