Edgun Leshiy 2 - Questions Answered 

I need to reply to this properly 1. You did not introduce me to Ed, I had him on my list to interview and I seeked him out. You were just there, so stop biging yourself u, I barely remember you. You may have tried to act as a chaperon, but trust me it was not needed. 2. I give a link to people where there can buy a rifle, that is up to me. Also there were multiple disclaimers and warning on the video. Stop complaining because you were not invited to the cool kids party. It was your fault for being an ass on Airgunology and accusing me of many things. See point 7. I would never recommend someone / dealer who is so rude to their potential customers. 3. The right work was done in my opinion by my dealer to get to sub 12 and I and many others are happy. 4. I have no obligation to mention you, Are you my mentor, employee or mother ? 5. When I wanted a L2, I searched around, googled and Edgun Spain came up. At the time I did not know it was Spain and I pinged an email. They replied courtesy and they got my money. They even suggested I went to you, but after seeing your rants on FB, I decided to go with Spain 6. So you suggest the wrong things are done to the L2, but refuse to mention what they are, another rant an nothing to back it up to potential customers. I have tried finding the FB post you mention and can't find it. BTW, i know the changes you have done to the L2 and even congratulated your customers after this video was released. 7. You never contacted me with regards to a L2 as I went direct to Spain. See point 5. When you saw I had one, you were EXTREMELY RUDE and ACCUSED me of many things on MY FB GROUP and this was BEFORE I launched this video. Why would I even contemplate speaking to you after that. I should have banned you, but I took the wiser approach and ignored you and let you shoot yourself in the foot with your accusations and rants. The way you have treated your potential customers on FB, by telephone over the last few months is TRULY SHOCKING. All of these posts are for people to see on my FB group when you decided to publically get into a rant with a customer on Airgunology I have even had 4 potential customers asking me directly what the crap you were doing and them telling me that you had told them to basically f off and you did not want them as a customer. I must have missed that part of the "how to win customers" training course. Then there was the rant about the L2 being unsafe and needing a recall. This is from a Edgun dealer claiming his rifle was unsafe ? Yes you saw sense and deleted it eventually. The only unsafe thing about the L2 at the time, was you and your complete unprofessionalism I have basically kept out of the infighting between you, other Edgun dealers and your potential customers, but enough is enough and you have pissed me off therefore THIS POST IS PINNED FOR ALL TO SEE.

Well said Steve you put that knob in his place

and this reply an example of why i will never have any dealing with edgun uk

Well said Steve. I've seen him on the fb page, the things he's said to his customers, coupled with his severely patronising tone are doing nothing but causing massive brand damage to EdGun. I really hope EdGun are watching how this guy is conducting himself.

When making a point about educating someone and using derogatory terms in that regard, it is always more effective and indeed treated as more valid if the correct language is used by the so called educator. It is ‘moot point’, not ‘mute point’. Your recourse to attack this reviewer in this manner, for doing what he is fully within his remit to do, leads me to believe it is better to take my business elsewhere and have no dealings with you, as is the right of any customer. Your actions should also be referred with reference to your continuing dealership rights.

Oh yes :)

Thanks

Thanks

Glad it helped

My pleasure, more to come as I get used to the rifle.

Steve Allan what size bottle mate ?

@@ptescreen18 300cc

Yeah, more will follow as long as they are responsible.

@@airgunology I'm guessing if any other manufacturer do it, it could be one of the Turkish airgun manufacturers. One because they already make semi and full auto fed through the barrel, and two if they get around the law with self indexing magazine fed rifles, then they will be able to hopefully produce one for the UK market and at a price most can afford. Love the Edgun, but well out of my price range, like the Steyar models, so hopefully a budget self indexing one wont be to long coming. Keep up the good work Steve.

Excellent, I suspect he will be getting a few orders.

I am not sure either

.22 takes less air than a .177 for same power. Therefore if you are swapping barrels, you will need to change the regulator (easy to do) to get the correct power. Important if you are legally limited on power like uk sub 12ftlb laws.

It is not as easy as USA where firearms are normal life. Here you have to have a reason, be vetted and visited by the police and if you are lucky, you can get a FAC.

@@airgunology wow that sucks sorry and thank you for helping me understand.

I know these comments are old but I am in the USA also, was wondering the same thing about the fac license, it's too bad that you guys could not get a politician on your side to try to relax some of the fac rules considering air guns, like as long as you are a Law Abiding adult Citizen with a clean record that you could be trusted with a full power air rifle, As I think myself if I lived over there I probably wouldn't bother spending that much money on a sub 12 rifle, I know it's probably been tried but maybe could start a petition and you could possibly get one of the politicians on your side to help you with the fight for at least those minimal rights, even here in the USA in 2023 ATF is trying to take our rights away bit by bit , seems you give them an inch they want to take a mile, but anyway good review and I am going to subscribe to your Channel,

@@bertbccfu9564 You can get rifles easily there, but apparently a period key on your keyboard comes quite dear.

Fine for me

@@paulstamp1208 doesn’t bother me either

I’m fine with it too 👍 annnnnnnnd,,,,, how rude 🤣🤣🤣

Doesn't bother me, I'm from the Midlands nobody understands half of what I say

Scope was excellent, playing with a few prototypes and watch this space for more on them

no not right, you have a leak

Thank you

Coming soon and yes no problems

For some, it is about the hobby and owning it. I tend to agree that our UK sub 12 laws are a pain, but them are the laws and if I want a rifle, I have to follow them if I am not FAC. The same could be said for most of the rifles made as they are all castrated for UK (and other countries) sub 12 laws. It would be very boring hobby if I only stuck to rifles made for sub 12 only. May as well take up air soft or nerf guns.

@@airgunology so true

Yes locks close ok. Mine hole for a 350mm 177 is 2.3mm.

@@airgunology Thanks mate, I'm also running 177 so looks like I'll be enlarging hole to 2.3mm.

Excellent videos, Steve, great info! I too would love to see a video on the regulator, specifically how I can check what it’s set at, e.g. 130 bar, 95 bar, etc. Thanks and keep up the great work on these Leshiy 2 educational videos, which I’m learning a lot from.

Another video request, Steve - if you could do a tutorial video on how to adjust the valve opening timing, once you figure that out. Thanks!

hahahaha

Depends on where you get it from. Check the link in the video description. You are probably looking at December delivery from Spain now.

@@airgunology that’s better than I was thinking, think I’ll wait till after Christmas as see how you’re getting on with it, looks fantastic, I managed to try one at vector air, feels a real quality item. Looking forward to the full review

Russia

I prefer my way and it annoys people :)

@@airgunology i guess you can, just makes you sound like you don’t know what you are talking about.. You also say “ It’s designed to be a full powered rifle, as are most air rifles.. Impacts, Daystate, they are all designed sub 12 foot pound”!!! Contradicting yourself...

@Steve Allan ...as Eric Clapton stated early in 1976 already: "There's one in every crowd"... Or Crosby, Stills, Nash & Young ""Don't let it bring you down" 😉

But I know a Russian lady, and when we talked about it.. She called it a ( Less - ee )... A rose by any other name, smells the same...

A few months I think now

300

I have due to lockdown. I am pushing 50 now and thinking of retirement :)

@@airgunology retirement from??? Video reviews???

@@heathhalfhill6867 IT Consultant. I don;t want to work forever

If you on about my hair, that was my IT job that caused that.

@@airgunology more like your stressed face and voice at the unlimited numpties on RU-vid! Lol

For some, not for others. I want a Ferrari, but they are too expensive. Doesn't mean I don't think they are great cars and should be disregarded to all.