EK Civic Front & Rear Whiteline Sway Bar Install

Подписаться 40 тыс.

Просмотров 17 тыс.

50% 1

check out my channel here -
www.youtube.co...
Items Used IN the Builds You see On This Channel Can Be Purchased from
spoolup.com.au/
BIG THANK YOU To The Channel Supporters
RACEWORKS
PROTEX
EXEDY CLUTCHES
CHICANE TOOLS
SUPERPRO /WHITELINE
ZESTINO TYRES
MTQ TURBO /GARRETT
T7 DESIGNS
MAXPEEDINGRODS
COMPLETE AUTOPAINT SPRINGVALE
I Couldn't Do What I Do Without Their Help.
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced SOLD
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph SOLD
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph SOLD
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph SOLD
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph SOLD
*1998 Honda Civic EK sedan K24 TURBO SWAPPED 280kW @12psi
*2012 Honda Accord Euro K24 CU2 128kW
*2003 Honda Accord Euro CL9 Racecar 151kW
*1987 Holden VL Commodore Turbo Restoration 250kW @15psi SOLD
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP 200kW
*1996 MITSUBISI EVOLUTION IV

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@victorwilks88 8 месяцев назад

Every EK needs this 😮

@TURBOTRISTO 8 месяцев назад

THEY SURE DO

@ThatstaticEKHatch 3 месяца назад

Sounds like it

@ThatstaticEKHatch 3 месяца назад

I got no sway bars and it's really really bad

@TURBOTRISTO 3 месяца назад

Jump on the whitline sway bars

@KKDriver 8 месяцев назад

I recently did front AND rear sway bars… (22mm front, 24mm rear) drives like an entirely different car now!🤙

@TURBOTRISTO 8 месяцев назад

It’s a massive difference

@austinnoble 8 месяцев назад

Yes

@TURBOTRISTO 8 месяцев назад

OH YEAH

@rafaeldomingo1258 8 месяцев назад

Thanks for making vid! Was deciding what sway bar to get.

@TURBOTRISTO 8 месяцев назад

100% whiteline all the way

@rushainperera6918 5 месяцев назад

HI mate just a question. Would the Whiteline rear sway bar hit the rear part of the stock exhaust? cz I have heard people saying that the exhaust needs to be modified a bit to fit the rear sway bar in Civic EK's.

@TURBOTRISTO 5 месяцев назад

I shouldn’t hit the stock exhaust

@robespinal6412 4 месяца назад

Hi there. Looks good, a question? I have the some job to do on my ek9 and was told I need to also replace the drop forks as well as lower control arms as you shown on your video. Is this true ? Don’t think you mentioned drop forks to replacement as well. Thanks Much appreciated

@TURBOTRISTO 4 месяца назад

An ek9 type r? You shouldn’t have to upgrade the arms at all, and the drop forks should be left stock also

@robespinal6412 4 месяца назад

@@TURBOTRISTO No , it’s a US 1996 civic hatchback Dx model ( ek9 ). So as you did lower control I will also need to, I just read in a few post that drop forks will need replacement as well do to dx model. Thanks for the help

@TURBOTRISTO 4 месяца назад

ahhh in australia and japan an ek9 is a type r, but thanks for clearing that up the base model cars do need the arms upgraded to the higher spec arms with the sway bar mounting points

@AbnerHernandez-we4yj 8 месяцев назад

hey brother I have a 2000 honda civic ex it has a problem the acceleration goes up and down I have changed the idle control and the throttle body and it doesn't work If you could help me I would appreciate it

@TURBOTRISTO 8 месяцев назад

Spray some bake cleaner around the intake and plenium and throttle body when it’s idling to see if you have vacuum leaks

@TURBOTRISTO 8 месяцев назад

If the revs go up when you spray the brake cleaner that means you have a leak and you need new gaskets or seals

@miguelplascencia6093 6 месяцев назад

Hey so I have a kswap ek hatch does the front white line sway bar fit I have a integra front subframe with ekk2 mounts ? I heard you say it in the video I’m just trying to confirm 😅 I’m doing the rear disc brake conversion and bushing upgrade and doing a rear white line sway bar the next thing is front bushing upgrade and sway bar

@TURBOTRISTO 6 месяцев назад

With a Kswap if you intend on swapping the subframe to an eg or dc subframe then you need to purchase a dc2 sway bar, the ek and the eg/dc sway bars are different, but yes you can k swap and keep the ek subframe it’s just a tight fit with the exhaust

@wayneheng1413 3 месяца назад

Hi Tristan. Where can I buy the d brackets mounts for the whiteline front sway bar?

@TURBOTRISTO 3 месяца назад

You use the standard ones or you can buy from the wreckers or from whiteline/superpro

@ThatstaticEKHatch 3 месяца назад

Im gonna die

@TURBOTRISTO 3 месяца назад

lol why

@fouhadahmed3411 8 месяцев назад

Want to do this for my ek sedan..what’s the total cost for this including all the parts and labour? Im based in Sydney

@TURBOTRISTO 8 месяцев назад

If you go to the whiteline website they list fitted cost inc labour

@fouhadahmed3411 8 месяцев назад

@@TURBOTRISTO just checked it thank you..also enjoying your videos on ek civics. Still watching that bolt on breathing mods on the fluoro civic and can’t decide if i should do those bolt ons to mine

@TURBOTRISTO 8 месяцев назад

@@fouhadahmed3411 you can it makes it a fun car to drive but still not fast I recomend a k swap always

@fouhadahmed3411 8 месяцев назад

@@TURBOTRISTO maybe in the future but for now Im on a budget so just enjoying the single jingle😁

@fouhadahmed3411 7 месяцев назад

Btw which one do you recommend doing first Coilovers or getting whiteline front and rear sway bars..I am using mine as a daily