Electrical Work Ep.97

Подписаться 1,4 млн

Просмотров 455 тыс.

50% 1

There will soon be power in the house! Ken Jordan here: • The Friend Who Revolut...
Thank you Cascade Electric, you guys never disappoint!
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus!
Check it out!
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
RU-vid bit.ly/2n4HCLG
Buy a knife from Cy Swan here: greenvalleyforge.com/
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcr. .
Twitter / ecnatwad
Facebook / essentialcra. .
Like the music? Spotify Playlist Here spoti.fi/3NzAnTg
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
essentialcraftsman.com/
Thank you, be safe, and be grateful.

Опубликовано:

25 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@krzysiekv12 3 года назад

In the UK it is customary for other electricians to point out how badly the work was carried out by another contractor

@MrSleepProductionsInc 3 года назад

I think that is universal. Especially when you see a guy running conduit.

@mikeyfoofoo 3 года назад

It is also true for anyone with a computer and more than 20 minutes of weekend experience to point out how badly work has been carried out. Ha!

@barrybritcher 3 года назад

Bundy 10

@xoxo2008oxox 3 года назад

@@mikeyfoofoo LOL..don't forget having access to internet makes them an expert!

@bigunone 3 года назад

@@xoxo2008oxox True

@corcoransullivan1562 3 года назад

Guy was a logger, then a home builder, then a blacksmith, then a 1 million sub RU-vid guy! Wow a powerhouse! Always impressed Sir!

@Edition89 3 года назад

you forgot concrete mason

@ADVBear 3 года назад

@@Edition89 ... and The Guardian of All Knowledge.

@corcoransullivan1562 3 года назад

@@Edition89 Absolutely, the guys a beast. Guys like this are an American treasure, not many around.

@oskarjohansson593 3 года назад

I am not surprised, he’s Also half swedish , so I can guess what part of him does the logging , blacksmithing and homebuilding parts and wich does the youtubing 😉

@BruceLeanTrades 3 года назад

and now he’s a general contractor

@timfalardeau9753 3 года назад

THATS THE CODE!! - Larry Haun

@dancearoundtheworld5360 3 года назад

Life goes on.

@thomasprendergast6315 3 года назад

Meh

@Lilliputian63 3 года назад

You caught that too eh? I wonder if Scott ever met Larry. Imagine the amount of combined knowledge in one small area!!

@sciatl2505 3 года назад

Not here meter and URD service cable can’t be inside the wall and also must have a outside service disconnect

@timfalardeau9753 3 года назад

@@sciatl2505 It was a goof on an old video by the Godfather of Framing/Building, Larry Haun...

@haphazard1342 3 года назад

Around 8:00 it looks like your electrician has run a lot of holes through those engineered joists. Worth mentioning for the RU-vid audience that engineered joists have limits on the number and size of holes you can put in them for installs like this.

@octaviusthecrafter 3 года назад

It's a Christmas miracle!!!! Essential Craftsman wore a respirator when he was supposed to!!!! I can't believe it!!!!!

@szymonkowalczyk5217 3 года назад

hahah that was my first thought too!!!!

@TheMVCoho 3 года назад

Peer pressure is an awful burden.

@dk3062 3 года назад

Breathing through my nose is how I filter dangerous particles

@GaryDelgado 3 года назад

@@dk3062 “OSHA-approved nosehair respirator” ;)

@TheScottyboyee 3 года назад

Rise of the nanny state

@dmkaeding 3 года назад

Excellent time to pull communication, computer, and entertainment wires too. Working for Ma Bell for decades, I encountered many brand new beautifully crafted homes and I had to drill a hole and have exposed surface mount wiring. It was a shame they didn't plan better.

@scythelord 3 года назад

I second this. I hope EC decides to install cat6 cabling in the home as well. Nothing is worse than a new house that lacks hardwired LAN. Wifi is NOT an adequate replacement for ethernet. Wifi is ONLY for portable devices that do not have a defined home location. Every single device that can take ethernet WILL be better using ethernet over wifi, especially since every additional device on wifi connection degrades overall performance for all connected devices. Every bedroom and the living room should have at least 1 ethernet cable. Living room should maybe have at least two outlets, with all these ethernet cables ran to a central location in the home where the ISP connection, modem and wifi router will live for the best wifi coverage of the home. Also if ethernet is ran, try not to run it alongside electrical if at all possible.

@varno 3 года назад

Al's don't skimp on the cable, use at least cat 6A at this time anything less really is not worth it. Make sure you have AP install locations in the ceiling of each floor too, as many as you can, it is much harder to add it in later than it is to build it in to begin with. If you want to really have it well, then run 1 inch conduit to each location with a draw string, so that newer cables can be run when the changes in technology require it. If that is not possible, remember coax for cable/tv/radio, cat6A for phone and data, so 2x runs to each point, and preferably run some form of fibre for future use at greater than 10G speeds (after 10G copper just gives up, we may get 40G but even that seems unlikely)

@FishFind3000 3 года назад

Unfortunately I think he’s to old to think about or know this. It’s gonna be the next owners issue. If they had a utility closet they could make that the central panel for everything and make it easy.

@FishFind3000 3 года назад

@@scythelord I was lucky that when my father build our home he installed ethernet cables to be used as phone lines. I was able to remove the phone line connectors and put on ethernet. Unfortunately since it was planned to be phone most of the lines are cat3 so it’s about unless and WiFi is faster. Thankfully one of the rooms that got the cat5 was mine so I have perfect internet speed being the furthest room for the router.

@janderson8401 3 года назад

Trouble with a spec house is guessing where the buyer will want phones computers, TVs, etc. Remodeled a den for a customer once where they told me a flat screen TV would be going over the fire place. We put blocking for the mounting hardware and had the electrician run both the coax and the power. The next time I had to work there the TV was in the corner and the was a big painting over the fireplace. A few years later the house was stuck by lightning which caused a fire that led to almost all of my work in that room getting redone by another contractor.

@salsyou 3 года назад

It is also helpful to the electrician to have a builder who is involved with the process. Just one example to make the meter, panel, equipment layout, etc look good and incorporate with the construction. As an electrician I appreciate that. Thanks

@markchidester6239 3 года назад

I would imagine there is a lot of "what the @#$&+*" between the carpenter, plumber and electrician.

@Odrunkmonkey 3 года назад

Electrician should have been there to set the meter box before siding, I’ve fixed at least two dozen leaking rotten garage side walls that were never flashed correctly. It’s a pain in the ass to have the power company come out and explain why I have to rip the wall apart with the meter and panel in it.

@WyrGuy2 3 года назад

@@Odrunkmonkey that was my thought exactly. The way that one was installed is a direct violation of the BC Building Code and does not maintain the integrity of the vapour barrier (a requirement in the Canadian Electrical Code) nor the (required here) Rain Screen system. One of the (many) differences between the NEC & the CEC and now that I’m happily retired... not my problem!

@JustinL614 3 года назад

@@markchidester6239 The carpenters and electricians usually don't get along

@JustinL614 3 года назад

@@Odrunkmonkey Unfortunately fron what I've seen that usually doesn't happen. I've replaced many outdoor electrical installations and for some reason most of my fellow electricians thinks 2 or 4 screws through the siding makes an outdoor box complete without thinking about water. Then when it leaks they say "well I'm not a waterproofer I'm an electrician"

@MrTheBurkes 3 года назад

"That's the code!" - Larry Haun, Essential Craftsman, and Phil 👍🏻👍🏻

@tattered666 3 года назад

I can hear Larry say it in my head 🤣

@markchidester6239 3 года назад

Was just going to say something like that

@bobniles1928 3 года назад

Does not your code require an external service disconnect?

@tattered666 3 года назад

@@bobniles1928 the external disconnect is pulling the meter itself which is the big glass dome in the exterior meter box. It's only held closed by a latch and tamper tag. The electric company or EMS/fire can easily and quickly disconnect the power if need be

@bobniles1928 3 года назад

@@tattered666 Are you trying to be a smarta$$? 2020 NEC requires an outside disconnect for 1&2 family dwellings. Pulling the meter is not a service disconnect.

@BubbasDad 3 года назад

From a retired Electrical Inspector; neatness always received extra points. It showed that the installer cared about the work and took extra effort to see it done right.

@thomasprendergast6315 3 года назад

Thanks, James. From a 35yr contractor, I appreciate the bs ya had to deal with. ( I may be 'retiring' into inspections. Not sure I wanna babysit so many children, but my body says, 'time!', lol)

@warrenmichael918 3 года назад

Yes, he does very neat work in the panel install, im sure he always does. The fact this is in a house that has close to a million subscribers also made him make sure he was extra neat too i would imagine! LOL

@BubbasDad 3 года назад

Pride in your work is no matter the value of the project or who will see it.

@thomasprendergast6315 3 года назад

@@BubbasDad right. But don't needlessly spend money on things you cant charge for. When you buy a Ford, Chevy, or dodge, do you expect to get get a lexus?

@JayKayKay7 3 года назад

We had an electrician get launched out of second story window when his drill motor bound up and rotated him up and away. We were building some apartments and the land sloped up at the back so he ended up unhurt flat on his back on the side of the hill. We all heard a yelp and walked to the back and there he was. After about a few seconds, the foreman yells out,"Whattya doing? Taking nap? Get back to work." Those things break your wrist in a heartbeat.

@darrenwoloshyn 3 года назад

Even a 18V cordless drill with an auger bit could snap your wrist. I smacked my face with the drill when it got caught.

@adamr1637 3 года назад

The superhawg he is using has a clutch that will slip before it throws you around. One reason I bought mine.

@JustinL614 3 года назад

@@darrenwoloshyn Be careful. There is a certain way to brace yourself with the drill that usually a responsible mentor will show you well before you ever get hit with the drill. I've operated core drills and rotary hammer drills that can easily flip a grown man around but with leverage in a way that I never have gotten hurt.

@TokyoCraftsman 3 года назад

I've been waiting to see this electrical video. My whole family on both sides are sparkies, both grandfathers, my dad, my older brother, several uncles, various cousins, etc, and my dad was an electrician and then he became an electrical inspector of the province for 30 years. I grew up doing this work. Yep, I was waiting to see the panel, you can tell a LOT about your electrician by how he makes his panel, this one looks great! Cheers from Tokyo, and Merry Christmas! Stu

@613kc 3 года назад

something special about working a trade you grew up in. no substitute for it. you're always a little ahead of your peers

@jacobcannon3347 3 года назад

How somebody does a panel does not make them a good electrician

@candace3676 3 года назад

Wonderful to know people in Tokyo are watching Dixonville, Oregon, EC. Amazing.

@JeremyHansen 3 года назад

On top of how the panel looks, also the detail made during the rough in. Everything will be hidden, but great sparkies will usually still keep things neat and proper. That work tends to be carried over to the finish. This guy's rough looked great!

@jacobcannon3347 3 года назад

@@gvanderleun Not Really, A 1st year should be able to tie grounds up good

@kevinrickard4830 3 года назад

I’m an interior contractor in Ohio. I’ve traveled the states doing Sheetrock. I subbed several housing developments here in my area between Dayton/Cincinnati, when the housing industry was booming in the early 2000s. I now specialize in interior restoration. I turn new construction away. Water, fire, wind, whatever peril damages a structure. There’s a good number of restoration companies around. My guarantee is this. My customers may suffer sticker shock, but will never have buyers remorse!! A superintendent that’s worked for me for years says. “No one can do it better!!! We know we’re not the only ones that do this, there’s folks that can do as good! But not better! There’s just no such thing!! You guys at EC could say the same! Keep up the good work! The good work can be sold anywhere in the world!

@paulkolodner2445 3 года назад

Here in New Jersey, the electrical code includes two items which are often overlooked elsewhere: 1. All electrical boxes must be crooked and loose. The front edge must be located behind the back surface of the drywall. 2. Holes in the drywall for electrical boxes must be large enough so that the tabs on the switches and outlets are not blocked.

@thomasprendergast6315 3 года назад

Hahaha! Same code writers here in NE ohio!

@bnasty267 3 года назад

Don't forget: 3. All wires in a box must be cut to NO more than 2 inches long and grounds twisted, clipped, and jammed in the back. Nobody should be able to rewire a box without cursing. 4. Receptacles, especially GFCI and decora, should be tilted and roll to the right. The face must never sit flush on all 4 corners. 5. If backstab connections are available, they must be used. Never spend the time to hook and screw your connections if it can be avoided.

@madscientist5969 3 года назад

HAHAHAHAHAHA - Good one! The NJ electricians must have learned their trade in New Mexico!

@jacksak 3 года назад

Hahahaha... so funny and true...

@bobainsworth5057 3 года назад

@@madscientist5969 Follow the money. Time is money. Electrical contractors who do developments follow 3 rules, 1) bare minimum to code, 2) use "builders grade - cheapest). 3) work as fast as possible ( use stab connectors in back of outlets not screws). Then they put in a bid which holds through building of entire development despite price increases. Last thing is State code but you have to follow township code. Each inspector has his own pet peeve. I once wired a three way sw. ( which can be wire three different ways by code ) and the inspector wanted it wired his way even though I used the code inspectors training book to do it. LOL.

@mr.h4714 3 года назад

Watching the electrician twist, cut to length and then seat those grounds into the box all with a couple quick movements of the crimpers he was using was amazing.....you can tell it's muscle memory developed from thousands of times of being done

@donm2255 3 года назад

I really enjoy watching professionals work. There is no wasted motion. And that applies to every trade. They quickly figure out the fastest path to the correct result, then with repetition do it without needing to think about it.

@ShouldersMoondog549 3 года назад

Been an electrician for over 50 years now, like a couple of others, I do like seeing how other electricians do their work. However, I do question the main service meter enclosure within the wall! It does look nice but!! I know that the main service drop is enclosed in conduit, but is is still inside the house! Should something happen to the meter or service drop to the house, the only protection this has is back at the transformer from the utility! Also, like to see more on how you are going to feed the sub-panel with 200 amps from the 200 amp panel in the garage ???? I still really enjoy watching the Chanel! The detail you have included is just Great!!

@tomyanney5856 3 года назад

I think they fed the 200A subpanel with SER via feed through lugs (never seen this setup 17:10.) I think it's a little confusing at the end, but it appears to me that the house has a 200A service.

@Resistculturaldecline 5 месяцев назад

Looks like a 200 amp meter base. I too was curious about the recessed meter base. I'm assuming the house is using a pass-thru first point of service panel as mentioned above which isnt how we do it but our way isnt the only way. I'm in Louisiana, and I know different areas have different methods. We also must have "burn loops" above our device boxes, which is a few inches extra slack wire between the nearest staple and box in case of any minor arc damage, more clean wire can be accessed by just pulling that little bit to you.

@av_990 3 года назад

As an electrician, and a fan of the channel, ive been waiting for a video like this! Cool watch 👍

@bmanwpg 3 года назад

Ditto!! Got pretty excited this morning when I saw it in my feed!

@Lugnut64052 3 года назад

Yeah, look at the bunch of us here. I expect a big percentage of the people watching this channel have spend many years, decades in a lot of cases, on the jobsite. And here we all are, watching guys working on the jobsite.

@dustindemoe2643 3 года назад

Also as a fellow “sparky”, it’s interesting to see others work. Though the NEC does allow #14 wire, it is rarely used in Oklahoma. I did expect to see this be a smart home with current upgrades. I’m not knocking the install, just curious if more is to come. Keep up the good work!!

@av_990 3 года назад

@@dustindemoe2643 hate being called "sparky" lol

@bigunone 3 года назад

@@dustindemoe2643 Other than lights the last houses I did were almost all done in 12 trying to future wire

@psidvicious 3 года назад

When I was a kid, in the back of the comic books, there was an ad for a gag called the ‘Joy-Buzzer’. By about the age of 9, I knew how much I hated getting shocked, so this looked like a hilariously funny gag to play on friends. From the cartoon picture in the ad, it appeared to pack quite a wallop. What the ad failed to reveal, was that the perpetrator received about the same ‘shock’ as the victim. After an agonizing 6-8 weeks waiting for delivery, it finally came. I secretly palmed the toy (per the instructions), held my hand out to my brother for heart-felt, honest handshake and WHAMO! we were both ‘shocked’. I hated that toy! I think I might have used it twice before trading it away for something less ‘painful’. I think from that point, I knew working with electricity was not in the cards for me. I love all the things it can do for us, but I’ll leave it up to someone else to work on the installation part.

@andrewalexander9492 3 года назад

Was it actually an electrical device? The buzzers toys I've seen were just a wind up device that vibrated, fooling the victim into thinking he's been shocked.

@ADVBear 3 года назад

That was a thoroughly enjoyable tale, my friend. But you got what was coming to you, you cruel child eheheh. I hate electricity. I can do all sorts of stuff, but when it comes to electrical, only fixing power outlets is about enough.

@psidvicious 3 года назад

@@andrewalexander9492 Right, it was just that wind-up, spring-loaded kind, just designed to surprise your victim unexpectedly. I just can’t stand that feeling, let alone a REAL electric shock. I did have a friend that had a gag ball point pen that would give a real electric shock when you handed it to someone, but the end ‘you’ hold was insulated. I did notice that some people could grab the pen with minimal discomfort, but others (like me) instantly pulled away. I guess I’m just a woose when it comes to electricity 🤷‍♂️

@ethanheyne 3 года назад

I've known 3 people who didn't mind leaning up against an electric fence for a while. Me? One zap reboots my brain and I have to figure out where I am and what I'm doing; I hate it. My cousin woke up on his back in a muddy hole, looking up at a woman holding a shovel. Took him a few seconds to realize she wasn't burying him, just wondering if he was ok. They were digging a drainage trench in the rain, and he'd bumped his forehead against the hot wire with the fencer on its highest setting. Same cousin became a first responder and was trained what to do if he had to work near a down powerline, and then had to use that training. Electricity builds or powers first-world tech one way or another, and I'm grateful for it, but I'm happy to let others deal with it.

@mikenormandy9250 2 года назад

Being a third generation commercial electrician (with some residential experience), watching this dude rough-in a house, alone, is astonishing! Clean, Neat, Organized! If only Half the other sparkies out there were 50% this good, We wouldn't have as many electrical issues and nightmares you hear and read about! great video again Mr. EC!

@bryanwinsor9392 3 года назад

What do you call 12 electricians on a scaffold? A whine rack🙂🎅❤

@psidvicious 3 года назад

And by the amount of whiny comments I’m seeing, that’s not too far off. “You shoulda this...” “Why didn’t you that...” 🙄

@carpespasm 3 года назад

What's one tool no electrician knows how to use? A broom.

@bigfoot99 3 года назад

Ha Ha! A good one.

@thomasprendergast6315 3 года назад

We sparks ARE superior, get used to it.

@blindorize 3 года назад

@@carpespasm Ayee zing! For real though we end up sweeping not only our shit, but the plumber's, HVAC, fire suppression, and sometimes framer mess too, just cause we're the last ones in. Not always, but it's very common for other trades to not sweep cause they know we're coming in behind them. At least where I'm doing work.

@jacklucas7265 3 года назад

I just recently installed a sub-panel in my house and acquainted myself with electrical work. It was a source of pride to me to be asked by the inspector if I was an electrician. The rest of my house here in Texas was wired by Morlocks, with wires scattered all over the attic. Your electricians are Rhodes Scholars by contrast.

@Jookyforever 3 года назад

Hey Jack. When you wire the sub-panel, what kinds of wires go from the main panel to the sub-panel?

@donmckechnie4129 3 года назад

Thats the difference between lowest bidder and getting a quality electrical contractor for a bit more in price. Here in Canada almost all residential is done by lowest bidder contractors and its scary/disgusting, especially in the countryside of BC, there's fewer inspectors so everyone does cowboy stuff.

@nofurtherwest3474 3 года назад

How did you learn this? Was it hard to learn? I want to try thanks

@willdavis2906 3 года назад

Finally an electrical video! I would love to see more of these and maybe here from the electrician as well. It’s always fun to here how other guys do their work.

@clayed 3 года назад

Always interesting to see how things are done elsewhere.

@eriknovak5452 3 года назад

As an electrical apprentice from Illinois, it's so weird not seeing conduit run everywhere

@marcelhertig3935 3 года назад

no pipes,only wire

@pistool1 3 года назад

Based on the video, it is surprising that professional electricians just nailed cables to wood everywhere and did not use any plastic tubing; seems pretty strange. In my country, every electronic work, no matter whether it is a summer cottage or a new office complex, they use those plastic pipes for cable installations and every single line installed. It is truly neater, more secure and easier (+cheaper!) to alter or update in the future, too. This is only my opinion. I guess the standards are different in the US than here in Finland, Europe.

@FishFind3000 3 года назад

@@eriknovak5452 ikr, I’m not even an electrician and I know everything in illinois needs to be protected in hard conduit or armored cable

@carpespasm 3 года назад

@@pistool1 In the US it varies by region a little. In most areas residential houses are run just like in this video, but for some cities they require everything must run in some sort of conduit pipe, and in the vast majority of commercial work wiring must be metal clad or in a conduit. I think the general reasoning is that once the walls are closed up it's unlikely the wires will be hit by anything that wouldn't have damaged them anyway, but in commercial spaces things are reworked so often it's more important to look out for future workmen.

@blackhillelliott4167 3 года назад

I met Scott today at this house, im a sheetrock stocker for longs building supply, he's a really great guy and helped us the whole time

@pfknob 3 года назад

What is the address of the house?

@mattschoular8844 3 года назад

Nice to see another professional at work... I love opening a panel to see perfection. Nice job Simon

@rakketz5976 3 года назад

As an electrician, I can say that this man is performing some clean work. There's a lot of hacks out there. But this guy is doing it right.

@essentialcraftsman 3 года назад

Yes!! Simon is a top hand! It kind of bothered him when I would insist on cleaning up the mess at the end of the day. He felt like he should do it and I had to be pretty direct to make him pack up his tools and head out without making sure everything was swept and tidy!

@governmentsnizzinspector2305 2 года назад

except for everything about the meter and service.

@trope5105 2 года назад

residential is the bottom of the barrel in complexity, but it def takes a decent amount of experience to make it go smooth with no hickups. i havent done a house in like 7 yrs now lol, ive done a few dumb things, but if i had to do a whole house, i would be knockin the rust off more than bustin ass. i wouldnt even know how to bid one really anmore lol. which is bad, because ive started my own gig, n need to get back in the market if i dont want to spend thousands to get into the industrial game, which is half the reason i quit my job. for a single guy its hard to meet ppl when ur livin that life. wyo electrical is a lot different than big city electrical, ten fold different really.

@kareemt4526 3 года назад

I'm just amazed at the different types of panels and the way they're installed in different parts of the world, and the ones that aren't used or go against the code in other parts of the world

@vicktorpatriot1430 3 года назад

In my area AEP nor South Central Power ( a cooperative ): will allow the meter to be in the wall like that. I think it is so that it is harder to hide a tap ahead of the meter.

@mdvener 3 года назад

Electrician did a nice neat job. I'm a retired 40 year Electrician, I never used those quick connections in the can lights, wire nuts, no crimp sleeves in grounding, but most of all one of my fellow workers died of mouth cancer. He always held a few with his lips, galvanized staples. A couple shots it looked like he was carrying that way. Don't want to see any one go thru what he did. Although you will never see his wiring once drywalled, the rough in inspector will see some one who is proud of there work, he won't have to look very hard to find a violation, if there is. Very nice, n this coming from Boca Grande, Fl.

@EricNielsen187 3 года назад

At 5:30 the sparky is physically checking the other side of the joust with his hand before drilling thru. Respect. I've seen far too many tradesmen over the years drill thru water lines, ducts, wires and even a gas line.

@benjaminvivar7855 3 года назад

Good looking work Cascade Electricians ! Keep it up.

@essentialcraftsman 3 года назад

Jeff and his crew are the best. I have used them for 25 years I think. Never a disappointment. Never a billing issue.

@thetruth5210 3 года назад

@@essentialcraftsman You made a mistake and told the truth there at the end. GC’s is not focused on the end-users experience, but is worried endlessly about their precious schedule, their pocketbook and making it to the end of that warrantee. We know at least one trade that you don’t respect after your ❤️on this video. I hope it was your son and not you, but just in case it wasn’t I’d rather be around somebody who swears like a sailor than one who thinks so precious little of his own fellow man. I’m glad you like your guy... I bet dimes to donuts there’s not a structured wire panel, the coax is RG6 (not quad-shield) with NO room for its bend radius in the box selected, and just like 25 years ago at the beginning of their professional relationship there is one piece of CAT5 that is ran like Christmas tree lights throughout the property for telephones (with a for sure stop in the kitchen and the master bedroom).

@bobcougar77 3 года назад

@@thetruth5210 Huh? I think i just read some kind of accusation of some sort but I read it twice and am still not sure. All the best

@thomasprendergast6315 3 года назад

@@thetruth5210 who are you? Have you ever seen one of Scott's houses before?

@thomasprendergast6315 3 года назад

@@bobcougar77 I agree.

@MrWaterbugdesign 3 года назад

I used to use those light cans. Love the new low profile LEDs.

@bob_frazier 3 года назад

Yes, yes, and yes.

@drewt3210 3 года назад

In 2007 I had a faulty fixture batch. Had to replace all 87 cans in a house. From then on I only use "Remodel" cans that pop into drywall with spring clips. Tearing out all those cans--especially in bead board porch ceilings--was a painful lesson I'll never forget!

@dalerobert8202 3 года назад

From Chicago area, every thing is piped. as a firefighter I like pipe. Now I live on the east coast, wire all over the place in my house, and houses are 3 times the cost.

@ulaB 3 года назад

It also helps to write it down twice - once a little further down the line. I have seen a lot of wires getting stripped and cut to length when mounting, removing the insulation with the text... :)

@trope5105 2 года назад

i dont like the romex labeling, nope nope nope lol. im not a resi guy though, but im consistant in always labeling just the hot in most cases, specially resi. a little flag with a number , or legit label. a million ways to do it though, my number one rule is eliminate the variables, somethin this old man def does, which i respect, because almost nobody does. rule number 2 is dont fight it lol. far to much time is wasted triyn to make shit work when it takes less time to just replace or whatever, ,, ive seen a lot of ppl try n bend 4 inch grc in a ditch lol, neways, thats not revelent in this convo i guess haha

@detroitbob58 3 года назад

Not to pick an argument with you, but I installed HVAC for many years, and we ALWAYS CAME FIRST! It's a lot easier for plumbing and wires to work around our ducts. We are limited in how many ways we can tin the ducts. A few times some electrician thought he would just sneak into a house and finish first. Weellllll, after we had to cut several wire runs because I just could not stretch the wires to get my 6" duct past them, and he explodes at the GC and us, we were always backed up by the inspector.

@stellarluna2637 3 года назад

I thought the same , can't bend a heat pipe like you can a wire .

@jacksak 3 года назад

Lots of comments like this one and I agree but wonder if it's possible for an HVAC route plan to have been worked previously out for the electrician to avoid. Just a thought... (???)

@DownwardsRising 3 года назад

@@jacksak Experienced electricians and plumbers often have a good idea where the ducts are going to go, and keep their wires low or high on the joists as much as possible so that the ducts can go through the middle of the joists. Return air ducts usually aren't a problem at all, as they're just compartmentalised joist and stud spaces that don't care if wires or potable water pipes are going through them. Sometimes it's the other way around too, if there's only one place in the wall of a washroom to put the electrical box for the switches, but there's already a drain pipe running through there from the washroom on the second story, or those big potlight cans have to go above a fireplace right where a bunch of ducts are already crammed in.

@MasterHomeowner 3 года назад

Poop before air.

@timothydillon6421 3 года назад

detroitbob58 It's in the crawlspace. It was put in after the joists and before the subflooring.

@JPElectric 3 года назад

As an electrician in the UK, I've been looking forward to see the power go in. Fascinating to see how its done over there. Its similar in some ways, but so different. I would be interested to know how long he took to first fix, he doesn't hang about! Every minute of this entire house build series has been brilliant.

@thebigmacd 3 года назад

I believe what you call "first fix" we call "rough-in"

@MTaylorElectricalServices 3 года назад

Yea some aspects look similar. No CPC sleeving at the CU 😳. Keep up the good work

@ubrayj02 3 года назад

This stage goes pretty quickly most of the time. There are always changes in a custom home and inevitable call backs as well as trim out - that is where the time gets eaten up.

@alexku8452 3 года назад

I was looking forward to this looking through German glasses. Some of the things I have seen made me cringe first, like no insulating sleeve on the ground wire. But thinking about it, the circumstances with the whloe wooden construction and the different electrical systems make it different in some ways, but looking in depth, not that much different at all. And for example the ground wire. Ours is supposed to have a green and yellow sleeve and you are not allowed to use it for anything else. But practically what difference does it make if it is sleeved or not? It is not like this one can short out anywhere. And if there is a metal housing, you have to attach it anyways. I think for this way of running the wiring, the flat format of the romax even has advantages to our more round cables which get burried in plaster and gypsum usually. And with the different voltages and phases of course there will be way different amp ratings. For example the breaker panels. they have just those two rails and mount breakers to the left and the right and have them each serve 120 V. Or you have a double width one that then can provide 240 V. In some sense easier than our DIN rail mounted breakers etc. But it simply would not work with three phase that way. And other than that, it is just different formats that developed over time. The inner workings are except for different ratings exactly the same. In the end, the physics are the same everywhere.

@thebigmacd 3 года назад

@@alexku8452 there are three-phase panels for commercial that are the same format. In Canada, they are 208/120V or 600/347V.

@TheFPSCENTRAL 3 года назад

Did a plumbing job with my uncle while I was in college. Had to drill some joists. The hole hawg almost spun me off the ladder and into the joists. The torque on those tools is incredible.

@robertgregory2618 3 года назад

Only use high speed on normal drilling. Low speed will break your arm. My favorite drill for decades.

@peaceonearth9550 3 года назад

I work for an alarm company. Most new alarm system can be wireless, but I believe camera should be hardwired. You get better high resolution cameras when they are hardwired. This is best time to run some Cat6 network cable to each corner of the house bedrooms(2nd flr bedrooms), prewire in low voltage box. I would leave them interior of the house back of the low voltage box same height as an outlet box. This will be an advantage for who ever is buying the house. I also believe in 2” PVC conduit from the crawl space to attic, this will be helpful in future for any upgrade.

@boots7859 3 года назад

Net engineer, and POE is correct and Cat6A is preferred for future-proofing. Run power and network to corners of the house. Power for PIR lighting, and network drops for cameras. Network drop near 1 or 2 electrical outlets per room. EMI should not be a problem for networked devices with Cat6A as long as you leave a little seperation if at all. Homerun all drops to a logical place for the router to be, which could be the MPOE or telco location. I would also run several extra drops for wireless access points in the attic/ceiling which will provide full coverage across the house, which will connect to your router/switch. Network infrastructure will increase the value of your house, increase reliability of your network, and both increase resale value and give you much better wifi coverage vs having a your ISP wifi router trying to cover your house and needing goofy wifi-extenders plugged in everywhere.

@BluntStuff 3 года назад

I could've watched him wire those boxes all day. So efficient with those crimper/cutters.

@colinstu 3 года назад

Yeah man. It’s mesmerizing watching a pro do that.

@tbernardi001 3 года назад

A couple of thoughts come to mind watching this video. First, the need for codes and inspections is derided by some. But as an insurance professional who worked on a claim where several people were injured at a house where a deck railing gave way, I sure wish the county where it happened had a permit requirement for attached decks. Otherwise there is no way a deck railing constructed with finishing nails would have been allowed to be placed into service. Second, and unrelated to the first, I was reminded of how attention to detail was tested by Van Halen. They had a contract requirement that there be no green M&Ms in the candy dish in the dressing rooms. Not because green M&Ms were bad, but to see if the local promoter could follow the contract. If there were green M&Ms, the band's people knew to start looking closely for other issues with the set up, like short cuts on wiring and lighting that could cause real problems.

@mdhofstee 3 года назад

Yeah that was cool story about Van Halen. Here is a good story about the Brown M&M's from the mouth of the person who came up with the contract, David Lee Roth, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YwHO2HnwfnA.html

@jacksak 3 года назад

So, were there green M&M's or was it all copacetic and the goose hangs high?

@mdhofstee 3 года назад

@@jacksak They were brown M&Ms and promoters had decided against reading the contract to the point that physical damage was down to the floor of venues. One such place Massari Arena had their new rubber floor on the court damaged to the tune of 80k when they did not read the part of the how much weight the stage was putting on the floor. Roth had also messed up the backroom when noticed the brown m&m's.

@jacksak 3 года назад

@@mdhofstee Thanks for your reply... interesting...

@austinyun 3 года назад

I'm a current union electrician. No residential work, all commercial/industrial, but I hear guys bitch about code and inspectors all the time. But when I was in Jr. High, my house burned down, almost certainly due to shoddy electrical work. I didn't wake up until almost everything was engulfed, but I had time to hop out of my bedroom window on the 2nd floor, walk to the edge of the carport, and jump down. I don't take it for granted.

@chrismoody1342 3 года назад

As a long time HVAC guy I preferred the way an admired general contractor handled the three main subs, HVAC, plumbing and electrical. When ready for us to start, we would all meet up for a walk thru. Room by room we would proceed thru marking all fixtures locations, switches, outlets and all the return air chases and registers locations. You can’t believe how many potential problems were solved prior to work starting and not getting each other’s way. We all knew exactly what the other guy needed and his route. He had the plumber and hvac subs start first followed by the electrician. HVAC trunk and branch lines are large and often difficult enough to work around and thru the truss floor framing. The plumbing of course, the next largest needed grade thru the floor trusses and a path to his risers coming up to the concrete floor. So we would work closely with each other. The electrical work followed up after us. Other than his box and fixture location, the wire path is Inconsequential. Big boys first !!

@RJT80 3 года назад

My father was an estimator for almost 40 years in Chicago. I watched him do countless blueprints but the ten floors his company was bidding on for the Sears Tower was especially interesting. Planning something like that is far more intricate than most people would think. The knowledge of regulations is crazy.

@thomasprendergast6315 3 года назад

I do commercial and industrial estimating. Would love to have a chat with your dad...

@harvestvillage695 11 месяцев назад

Especially in Chicago! Even in their residential houses all the wiring has to go through conduits (unions)!

@electricalron 3 года назад

I’d go one step further and ask that the HVAC go before the electrician.

@evanmorgan1208 3 года назад

Yeah I'm an electrician and the Plumbers always come first, HVAC second, Electricians third. Can't wrap my head around how the HVAC guy is going to run things around wires :D

@electricalron 3 года назад

@@evanmorgan1208 I'm sure on this job ALL of that has been figured out already. There aren't many GC's like the Essential Craftsman.

@timothydillon6421 3 года назад

The duct work went in the crawl space after they rolled the joists and b4 they put down the sub floor. The HVAC guys were thrilled to stand in a crawlspace and install duct at waist height.

@itaintrocketscience 3 года назад

Another electrician here Came to say the same thing.

@jacobplank 3 года назад

I'm an electrician too, and we prefer being there last to but a lot of times in our area that doesn't happen as they get in a hurry or the other trades don't show up when they are supposed to. But we definitely think of there need and stay out of there way , (most times)

@colbymason8054 3 года назад

Electricians, people who work in the dark,so you won't have too. Merry Christmas and Happy New Year. 🎁🎄🍻🎶

@thomasprendergast6315 3 года назад

Thank, and Ho, Ho, Ho! Very appreciative

@jackshadow325 3 года назад

My advice: 1) Leave some extra wire outside of each box just in case one is cut in the box by the drywallers and you need to pull some more in. 2) Save time by not writing on each wire entering a box. Just write on the studs what each switch is for and notch the switch legs accordingly with your pliers. One notch for the switch on the left, two notches for the switch on the right, etc. All other wires are power in - power out and don’t need a label.

@bamabackroads1203 3 года назад

As a drywall guy it makes me smile to see him properly stripping the outer sheath, and stuffing the wires in the box. The guys around here don't remove the outer sheath and the leave about five miles of romex hanging out of the box. We try to get them stuffed in far enough to not hit them with the router when we cut the box out, but sometimes there's so much wire in there it can't be helped. I always ask them if they get paid by the foot of wire. Most if them around here have never even seen a staple either.

@cjhification 3 года назад

A well layed out distribution board/panel is a thing of beauty.

@jasonhanson6563 3 года назад

Hole Hogs are definitely a knuckle-smashing good time.

@horsekid98367 3 года назад

Or face, I made the mistake of getting my head between one and the deck above, it was a head smashing good time!

@matthewhoffman9242 3 года назад

@@horsekid98367 ow......., nearly twisted my wrist off and had the concrete drill slam my shin in the same pass while boring out a 4x4 and it was only a little concrete drill.... hadn't ever messed with one of the big hole hog style drills but i can only imagine the pain it caused.....again oww

@jeffd2931 3 года назад

ive knocked myself unconscious and off a ladder with a hole hawg, when they kick they sure kick like a mule

@jeffd2931 3 года назад

@shamp00p no one argued their reputation, and it is a great tool , but for that comment sir, your are a gigantic tool and a douche, nice job trying to massage your ego, ill put a vote in for ya in the "smartest man in the world" contest. douchebag

@svensvrgen6336 3 года назад

Roger that the super hogs have a clutch though and it seems to make it harder to get them caught like the original little hole hogs

@suttonbogedain5874 Год назад

Dear brother, Thank you for the respect you always show to each discipline. Nearly 20 years of old and new work flew by when respect was given and reutrned. There is no great "welcome" to the job site than that. At 70 I still see the whole house process as fun. Although my professional days there are done I look forward to the new four car garage that's going to need a few devices. Grace to you.....

@bigunone 3 года назад

I am surprised in my area the HVAC goes first because their stuff has only so many places they can run especially if they a re running metal duct, then plumbing is run then electrical because our wire is flexible. If you think one of those angle drills will screw you up try a triple geared D handle hang where the framer got crazy with the nail gun on the top plate! One of my bosses was an ex Navy electrician, his panels were something to behold every wire was straight every corner was square and the distance where they connected to the buss bar was the same from one wire to the other beautiful, and it took him 6 hours to do a 20/40 panel with the panel and meter already mounted!

@bobcougar77 3 года назад

I think the HVAC is already in, although I didn't notice it in the video. A few videos he was giving a talk on the the order of installations which agreed with you.

@aerialrescuesolutions3277 3 года назад

I really love how you set that panel into the exterior wall, nice and tidy and as clean as possible. The narration and editing are awesome. The electrician has skills for sure. His lack of safety glasses with all those chips flying was pretty too. To each their own, maybe his company doesn't require such items. Thank you for yet another great video. Keep up the great work. Jim Tree

@dustindemoe2643 3 года назад

I also noted the lack of safety glasses.

@janderson8401 3 года назад

@@dustindemoe2643 that was to make up for Scott wearing a respirator while cutting the fiber cement siding. Have to keep a certain level of danger or we trades people get bored😉

@tropifiori 3 года назад

In building my last house I asked the builder not to install any light switches as no lights are ever turned off in my house anyhow. I tried to get him also to not install a meter, but he wouldn't do that either.

@junkmail1262 11 месяцев назад

That’s funny. We never have lights turned on. Only light on is the flat screen. It puts out enough light to cover 3 rooms LOL

@ryandarville5627 3 года назад

Been following for a little while , and I was excited to see you finally talk about my trade in a full video. You nailed it! Awesome watch.

@besearchingforwisdom6267 3 года назад

I watched 4 times in a row. I love your series, insights, narration, everything. I'm a very fortunate guy to have found it

@bahopik 3 года назад

In my neck of the woods, common courtesy is to let heating guys run their stuff first as it is the biggest, and electricians are last ones as their is the smallest and easiest to work around other trades

@tonyskillz 3 года назад

Screw the HVAC guys- plumbers have absolute priority, water has to drain and breath correctly

@warrenmichael918 3 года назад

@@tonyskillz yep we always went first as plumbers can NOT make water drain uphill!! Then usually the hvac guys get their ducting all installed so the sparky patrol can run the lightning wires around the ducting and plumbing.

@NomenNescio99 3 года назад

I'm living in Sweden, and we have really different standards and methods for cabling here. This was very interesting to see...

@ripstick2217 3 года назад

Code varies widely even throughout the US. Some areas require metal conduit instead of the type of wiring installed in the video.

@BendeVette 3 года назад

@@ripstick2217 In the netherlands all conduits are made out of pvc. Because most houses are made of brick, concrete, etc, they are all concealed (and kinda save from fire) within the wall. New cabling is easy, just pull in new wiring. Never understood the cabling as shown in this video.

@spenserthomas3635 3 года назад

@@ripstick2217 Conduit generally is used in commercial and industrial settings. Romex and Metal Clad (MC) is generally used in residential and light commercial. I don't think you'd see much conduit in residential unless it is a more expensive build as it much more expensive, with the exception of certain applications as required by the installation.

@horsekid98367 3 года назад

It's all about cost, romex ( as used here) is incredibly cheap and quick to install. Residential new construction electrical is a very competitive market, so keeping cost low is a major factor.

@LxxHipNotTrickZz 3 года назад

@@BendeVette ''New cabling is easy, just pull in new wiring.'' Have you ever tries to do this in flexible PVC conduits :P I wish you luck. With normal rigid PVC it isn't always that easy.

@joelongrid7625 3 года назад

Excellent video. Always a fan of bringing a sub panel into the house especially when the main is in the garage. Heavy power goes to the main panel and lighting and receptacles go to sub panel, mostly anyway. Your electrician is a true pro. PS: I was offended as an electrician when they started color coding the sheath on NM cable. Now that I am 50 and watching this stuff on the tube, I have a simple appreciation for it.

@ryanjackson2839 3 года назад

I've been in the industry for 8 years now and i have never seen any information as good as yours on the topic of construction. i always make sure to catch your videos as they are produced. thank you for the vast knowledge and ideas from your channel. what a beautiful house you built as well keep it up EC!

@haphazard1342 3 года назад

Recommendation: I strongly advise the use of adjustable depth boxes in all locations, but especially for all outlets and switches in the kitchen and bathroom. These rooms most frequently have variable depth wall surfaces when finishes like tile are applied. Instead of having to use a box extender ring, which feels sloppy on new work, or guessing the final finished depth, just use an adjustable depth box. Doing this for all boxes in an installation adds a very modest upfront cost to the install, but will save both you, your subs and installers, and future contractors and homeowners a lot of minor annoyance (and potentially not insignificant trouble to retrofit). Client wants thicker drywall? Thicker tile? Decorative paneling over/instead of drywall? Moved a cabinet over an outlet? Accidentally put the box in too deep or too shallow? This is all easily remedied with an adjustable depth box.

@thomasprendergast6315 3 года назад

Seriously dude, that is overkill. Use those pricey boxes in kitchens and bath, for tiling. Otherwise, nope. There are inserts for future situations. Let the future homeowner pay for that.

@haphazard1342 3 года назад

Kitchen, bath, and exterior walls.

@thomasprendergast6315 3 года назад

@@haphazard1342 nope. Explain why you have to charge 1.50 to 2.50 more per outlet? To satisfy yourself??

@evanmorgan1208 3 года назад

Never seen anyone do that.

@MasterHomeowner 3 года назад

@Thomas Prendergast When you put it that way, I now approve of the adjustable depth boxes. But I'd charge more. Adjustable depth mud rings are another story. I just tried and like the "ReceptXtenders". But Arlington Fittings BE-1, etc are mandatory for truck stock.

@RyanTaylor-pi8gq 3 года назад

When I renovated my old beat up victorian, I was struck by how many of the difficult electrical decisions were made for me by code. There were obviously still points to think about concerning the location of double and three way switches, overhead light fixtures, etc, but in terms of outlets, I feel like it's difficult to comply with code and not end up in a house that's totally covered in outlets nearly everywhere.

@codygooch510 Год назад

😂😂 literally everywhere. Even right there by your bathroom faucet.

@TheRiddler491 3 года назад

Been loving this series. I am really excited for the drywall and painting videos. I do painting contracting and light drywall work. I love seeing different videos to see how I can do things differently, and have people talk about the process. Keep it up!

@dutchcreek1 3 года назад

I learn so much from the information, what is said, but most of all, how it is said. New to the formalities of doing this as a business, a guy in his 50’s, starting over in life, and very thankful for your insights.

@charlesward8196 3 года назад

I love the reference to Larry Haun!

@thomasprendergast6315 3 года назад

Not me. He's a carpenter.

@matthewwright57 3 года назад

No matter what you think, the garage needs at least 3 dedicated circuits, and an outlet every 4 feet. Preferably a 240V stub as well, just in case someone owns a real tablesaw.

@thomasprendergast6315 3 года назад

Matthew, you just don't understand how this works, do you? This is a spec home. Scott is building a house to sell to an unknown buyer. That buyer may never use a 240volt circuit in their lives, if they have gas water heat and dryer. Why would you add cost, with a huge chance of no return? Plus... plus, I say, your idea takes a very nice and profitable job away from my brother sparks, adding g those circuits and being paid service rates. Rather than charging Scott resi construction rates. Heck, he can't charge for what you want to install

@rolfbjorn9937 3 года назад

@@thomasprendergast6315 I think you are the one who doesn't. Having those extra features is a good selling point. Also, electric vehicles, garage shops and other exterior features might require this power and are fairly common. A smart builder will implement them, and it will pay. If we were to follow your logic properly, we should modify the building codes in such a way that everything barely holds to create extra jobs. Also, I don't think that adding a cable run or two while everything is open is needless expense, it's careful planning.

@billclinton6040 3 года назад

I have a much better appreciation for this type of work after having to rerun the wiring for my 120V landscape lighting that shorted out because the builder (not me) used interior romex instead of UF. Fortunately, the builder used PVC conduit throughout the entirety of the underground runs, but pulling wire, even through conduit, under concrete, around bends, etc., was a challenge. Not to mention stripping all that UF to make connections. But, now that it is complete, my landscape lighting and the new LED fixtures look great. But, to be honest, I am more proud of the UF I pulled through all that underground conduit that ironically nobody will ever see because a job done right never sees the light of day :)

@paulehlers2225 3 года назад

Love seeing so many 20A-12ga circuits. Some of the things I've learned over the years.1. When you think you have enough outlets, add some more, now is the time to do it. You'll thank yourself in the years to come. 2. Bathroom, Kitchen & garages should all be 20A outlet circuits, these are the areas that the high load stuff get's plugged into. 3. Because I love my power tools, every garage/shop should have several 220V outlets, you never know when you will acquire another 220v tool and it seems like there's never an outlet close to where you want to place it. Another great video!!!

@misterhat5823 3 года назад

I'm fairly sure bathroom and kitchen must be 20A to meet code.

@johnsawatzky1755 3 года назад

Have been waiting for the electrical install since the beginning of this series and I have to say it was very anticlimactic....also just because you have 2- 200 amp panels dose not mean you have 400 amp service.

@cjhification 3 года назад

Because you've had timber framed construction for so long it's interesting to see that metal staples are standard, to prevent premature collapse of wiring in the event of fire, this is only something very recently introduced in the UK, as when they where buried in masonry and plaster, as they were here traditional, it wasn't an issue.

@mdhofstee 3 года назад

The code only requires it to be laid flat. The method is not as important. The reason for that is safety of the homeowner. If after filling the stud bays with insulation and you put a nail or screw into the drywall it could nick or go into a wire. By having the wires on the side of a stud laying flat the chance of penetrating a wire is reduced. I have seen metal staples, metal staples with a insulation on it, plastic staples with two nails, you can even use zip ties. As long as the wire is laying flat against a stud and secured before going into a box, every few feet next to a stud it is legit.

@horsekid98367 3 года назад

It's my understanding that here in the US, the staples are used to keep the wiring in place during construction, so that it doesn't get pinched in drywall or hit by a screw. At least, that's what I've heard 😀

@cjhification 3 года назад

@@horsekid98367 it's fulfilling the same requirement, regardless of how it came about. Maybe if it wasn't done like that there would have been a lot higher numbers of firefighter deaths due to entanglement.

@schwiftyoliver77 3 года назад

I'm an apprentice electrician in Oregon and have been looking forward to this video for some time! Keep up the good work!

@RJG772 10 месяцев назад

Excellent video. Thank you for taking the time to put this serious together.

@Connecticutsparky 3 года назад

How did I know there would be a corded hole hawg here 😂. I still have nightmares from that dark era of electrical work lol

@Edition89 3 года назад

I've discovered with my OCD I would make an excellent electchicken who is always broke because the job would take 10x longer to do for the same price.

@thomasprendergast6315 3 года назад

Such as I was, when I started 35 years ago. God willin, and the creek don't rise, we all learn as we go along. My wife will tell ya, I was a mighty poor($) lectramagician. Lol

@fondupot 3 года назад

Glad to see you using PPE while cutting the concrete-fiber siding. Love the channel guys. Looking forward to the final product.

@ArtByCater 3 года назад

Wow, such a maze of wires, looks clean and professionally done, I liked the stick jig for hanging the boxes too. Thanks Chuck

@jpm1211 3 года назад

Imagine the fun here in Chicago, where it all has to be in conduit (even residential)....

@timothydillon6421 3 года назад

I'm sure they would have utilized the crawlspace more.

@davez2989 3 года назад

Really? what is the rational with conduit? I suspect you see a lot of RWA line as well then, or is that frowned upon?

@jpm1211 3 года назад

@@davez2989 Union jobs, naturally. It's Chicago!

@davez2989 3 года назад

@@jpm1211 because non union can't run conduit?

@jpm1211 3 года назад

@@davez2989 More work, more hours, more money, more members, more dues!

@Clovethelightrespectthepower 3 года назад

Sitting here drinking out my EC mug (big smile)

@totherarf 3 года назад

I started off as a spark in the UK. 40 years later I work on big stuff .... but half was on domestic. We used to tell people to work out where they could possibly want to use an electrical piece of kit ... and Double it! Sockets are run in ring circuits so it does not matter where you plug a piece of kit in and there is only so much kit you would want to use at a time. Eventually it evolved from the one circuit covering 100 sq m to one circuit upstairs another downstairs and a third in the kitchen (where the heavy load is). Typically you get a single phase 100A supply but if you need more you can get 3 phase 100A! The largest load you can run from a socket is 13A (3 KW) and our mains pannels are a third of the size of yours. The distribution network is also different here in the UK with a typical substation having circuits running from a 400 A fuse and supplying hundreds of houses from each sub ..... usually in an underground installation! Nice to see different ways of doing things!

@matthewyok7107 3 года назад

I'm an electrician and have enjoyed watching your channel for a while! I think you're great!

@richardclapp9875 3 года назад

I know I’m an old electrician , but you can’t beat a Square D QO breaker box and metal outlet and switch boxes

@RealFifty 3 года назад

I feel like this is a joke LOL

@blueoval250 3 года назад

I’ve had QOB breakers fail to trip with a dead short many many times. I agree with the metal boxes.

@incognitotorpedo42 3 года назад

I hate cheesy Carlon boxes. I love the smooth corner metal boxes, but you have to add a ground to them. Good plastic boxes exist, and are a reasonable option.

@charlesmiller5078 3 года назад

I know you are going to pull communications ( computer ) cables before sheet rock. Pull cables for cameras ect also, you only get one chance to do this correctly.

@stellarluna2637 3 года назад

Agree ..I.built my cottage thinking and reading that wifi cams were the way of the future . They aren't. Too much reliance on signal and batteries

@charlesmiller5078 3 года назад

@@stellarluna2637 And very unsecured, cable if you possibly can, you cant install to many network cables. People would call us after their house was built and want network cables installed. If they would of called before drywall, 1500.00 after drywall, 7,000.00 if we even took the job. 1 days work, or 2 weeks works. You only get one chance. cable,cable,cable, all rooms, and where maybe you will mount cameras, very important stuff. And dont forget cable, he should have a communications room (small), where they all terminate, plainly marked. You can hack WiFi with a 80.00 device.

@stellarluna2637 3 года назад

@@charlesmiller5078 live and learn not worried about getting hacked but hate battery life and reliance on wifi service. Will remember next build.

@gallamine 3 года назад

Man watching this guy work gives me the fizz. It’s a hard job and seeing it done well is just perfect.

@Sparky114HD 3 года назад

As an electrician myself I have been waiting a long time for this video! I like to watch others in my trade work to see how they do things and if I can pick up any other tricks they may have. I love your channel always very positive and informative. If I’m ever in Oregon I’d love to meet you and sit down and have a cup of coffee. You remind me of my dads older cousin. He is a cabinet maker by trade but also dabbles in blacksmithing, auto restoration ,wood working, metal fabrication and many other things. I really enjoy visiting him and working with him in his shop. Keep up the good work! PS I do have a comment about the installation. Here In Arkansas where I live if we have a 400A service that will power two separate 200A panels we have to have a separate 400A MDP with two 200A breakers. One for each panel. I noticed y’all fed the 200A sub panel off the 200A main panel. That is strange to me because that 200A main feeder could potentially have 400A on it. Also the busbars in your main panel are only rated for around 200. This is another hazard in my opinion if you add any extra loads it can over load the buses. I could be completely wrong and y’all have thought about that. I was just curious and wondering about what y’all’s thoughts on that were? It’s just something I noticed

@ADVBear 3 года назад

It's so strange to see that the wires run through the walls without going inside a main conduit. Here in Brazil, we use flexible hoses to run cables and wires from electric point to electric point and then to the breaker box. It seems more secure and it's also easier to run additional wires if needed, using a probe. But alas, it's definitely much more work and our buildings are almost always brick and mortar (terrible, horrible insulation and shock-resistance). It's very uncommon to see framing and drywall in a typical construction here. We only use it to divide a room, for example.

@hjvisagie 3 года назад

Same here in RSA

@leekazuya1305 3 года назад

interesting... running conduit is optional in Canada as well, we just use romax or bx cable to rough-in, and most of our houses are wood frame or steel stud framing, it is definitely inferior compare to cor-line or emt pipe, but it is way faster and less expensive, some of my co-workers from Europe told me that their code does not allow cables as a rough-in option, so they have to cor-line, PVC, EMT pipe everything.

@ckm-mkc 3 года назад

When I was doing houses in Europe, everything was run through conduit. Makes upgrading far easier. In the Netherlands, a lot of buildings are aerated concrete blocks (even interior walls). There is no wall cavity, so you wind up using a router to make channels for conduit which are then backfilled with a mortar mix... Wire is pulled when all the conduit is laid. In rural France, you see quite a lot of surface mount conduit as old houses were never designed for electrical and are often either masonry or 'torchis', a type of adobe construction that is harder than cement.

@FishFind3000 3 года назад

Same in illinois. Everything needs to be protected in hard conduit or armored cable.

@hornetIIkite3 3 года назад

@@ckm-mkc actually the light concrete bricks are used less and less in the Netherlands. All drywall or metal stud walls now. A lot of electricians use pre-wired flexible pvc pipe now. No need to pull wires with a spring anymore. In industry grey 22mm impact resistant pvc tube is used. Usually they run a ymvk cable through that. They just mount that on the wall or cable rails

@kennethwright8081 3 года назад

It’s a shame that the electric meter is having to live on the street side of the house. Where I live they are always on the side or back of the house’s. I guess that’s where the landscaping crew can come and plant a bush to hide it 😂.

@zbrown72 3 года назад

This

@BendeVette 3 года назад

In the Netherlands (and I think a lot of countries in Europe) these boxes are inside the house, mostly next to the front door, nicely hidden behind a door. What's the reason they are outside?

@horsekid98367 3 года назад

Regarding the location of the meter, they are generally placed on the exterior of the building to allow easy access to the utility to read it. With smart meters, this is less important but still allows for easy access vs scheduling with the homeowner for access.

@wim0104 3 года назад

@@BendeVette tradition. here in Texas, it is custom to plant a prickly plant in the way.

@999torino 3 года назад

@@wim0104 lol!

@JVMBeatz 3 года назад

Very pleased to see the electrical video, was getting worried it might be skipped. Thanks for making excellent videos on the construction process.

@terryslade4760 3 года назад

I am from central Kentucky and I went to Roseburg, OR in Google maps and started looking for this site! I found it in less than 2 minutes! When I pressed my finger on the site it came up as Essential Craftsman spec house! So cool to see where you are! Enjoy watching you build this house!

@sean6077 3 года назад

Nice Larry Haun reference. I've probably watched him build that house 5-6 times, now.

@whiggins101 3 года назад

Me too! Does anyone know where the house is Haun used in the video series?

@Jack-yl7cc 3 года назад

I hope there is more dedicated circuits going to the kitchen than I saw in the vid; perhaps they are in that second interior panel? At the very least I would like to see a dedicated circuit just for the microwave because if the future homeowner buys a 1500-watt microwave then it goes from a nice to have, to a must have.

@thomasprendergast6315 3 года назад

Yould like see. Hmmm. Just zactly who are you?

@ubrayj02 3 года назад

Yeah man, modern NFPA-70 kitchen circuits are nuts. You can easily get 5 or 6 circuits just for the kitchen.

@JeremyHansen 3 года назад

I've been out of the electrical game for some years now, but I'm pretty sure if the microwave is a mounted one, a dedicated microwave circuit is required by the NEC. Then you require at least 2 small appliance circuits, the dishwasher/disposal circuit, lighting circuit, and a 220v for the range. Sometimes the fridge will be on one of the small appliance circuits, or it might be looped in with a circuit with something like a freezer in the garage.

@prodantech 3 года назад

I was blown away by how fast he prepped the wire inside of the electrical boxes. That stuff takes me so long!

@JustinL614 3 года назад

Watch what he does and try it. Btw I would say he's about average speed as far as electricians. When you see a really fast guy you're going to be very surprised.

@prodantech 3 года назад

@@JustinL614 Yeah, good idea. I also liked how he approached his holes at an angle around the more crowded studs. For some reason I’ve felt the need to keep the holes straight and I’d make quite an effort to do so.

@stuartlockwood9645 3 года назад

Hi Scott, great video , best wishes to you and family for the new year, let's hope 2021 is a better one for everybody, kind regards Stuart.uk.

@gregreeser8823 3 года назад

I was patiently awaiting this video, 35 years in the electrical trade. I still enjoy seeing other electricans techniques.

@stellarluna2637 3 года назад

Pot light cans? Are LED lights not the industry standard in most new homes now? Thin and sleek, energy efficient and last forever. No heat cans needed. No Brainer. House looks great though .

@gregorysemones7480 3 года назад

They will put led trim in there surely. Also some people like the trim to be more recessed, and don’t use led trim for that reason

@stellarluna2637 3 года назад

@@gregorysemones7480 we ll see , they look like halogen cans . No need for deep cans with LED

@MasterHomeowner 3 года назад

The LED retrofit kits with a standard housing has less glare than a wafer LED. We built a test ceiling to test this.

@stellarluna2637 3 года назад

@@MasterHomeowner most LEDs have an adjustable "glare" level. Or good ones do. Seems like a lot of extra work is all I'm saying .

@TheKenstarr 3 года назад

These are the cans I use. Now and again we do new construction with the flat "canless" LED lights.

@vanillarain711 3 года назад

I love watching skilled workers! These guys are clearly pros!

@davidz2950 3 года назад

Merry Christmas Scott and Nate. Thanks for the great information you have given us.

@oelschlegel 3 года назад

400a is definitely planning for the future. The garage could easily charge a Tesla.

@danielwolf2192 3 года назад

It's not a 400 amp. It's a 200 amp service with a sub panel for more breaker space.

@MarkRose1337 3 года назад

@paquitos hammer There was a time when anything over 50 amp was considered overkill for a house. But now a Tesla charger ideally gets 60 amps (at 240 v) to itself, then an AC may need 30 amps, the water heater 30 amps, the oven/range 50 amps, the dryer 15 amps. That's already 185 amps. 200 amp service is the bare minimum I'd put in a new build. If it were my place, I'd spec a 400 amp main panel and service.

@rentbennett 3 года назад

@@MarkRose1337 At least a couple of those will be natural gas in this house, so they should be pretty comfortable with 200a. But if you were going electrical for everything, having at least the main drop be 400a wouldn't be overkill.

@mikekubassek4987 3 года назад

1995 called.. They want their Pot lights back! 😂

@JeremyHansen 3 года назад

I'm about to renovate my kitchen and my florescent tubes are coming out and those pot lights are going in with LED trims. I want the light recessed and you just can't do that well with wafers (plus there's attic insulation above, so the 6" clip in LEDs aren't ideal).

@thomasprendergast6315 3 года назад

Public note: this is a 200amp service. It has 2 200amp panels, but by size of the incoming pipe, it is just a 200 amp service, not a 400 amp overkill. FYI

@MasterHomeowner 3 года назад

@Thomas Prendergast But I like selling the 400-amp, 80-space NQOB's.

@thomasprendergast6315 3 года назад

@@MasterHomeowner ok, you made me laugh.

@MasterHomeowner 3 года назад

@@thomasprendergast6315 Oh dear, I will try to not slip up again.

@gregz7159 3 года назад

I love beautiful panel boxes. Nice work.

@arlenmargolin1650 3 года назад

If you've got a lot of caulking to do and painting it's always advisable to prime all your raw wood before you caulk, you're adhesion rate will be far more successful

@MandoFettOG 3 года назад

I believe that was primed

@rpavlik1 3 года назад

And I'm pretty sure it wasn't actually even wood but some kind of composite or at least manufactured wood

@pizzleboy 3 года назад

Why would you ever need 400 amps?? You could set up an arc welder in every room! :)

@Jack-yl7cc 3 года назад

Sometimes it's about how many breakers / circuits you can fit inside the panel and not how many amps are being drawn. That said, your standard god-awful single serve Keurig coffee maker pulls about 13 amps just by itself. If you have the misfortune to have that on a 15-amp breaker then you basically can't use any other appliance on that entire circuit without a chance of popping the breaker. If anything, I think he might be slightly under sizing considering how large the house is. I really hope he has dedicated circuits for every major kitchen appliance.

@grounded-b937 3 года назад

I agree. With all gas appliances, 200A would be great plenty, especially since he doesn't really have room on the lot for an outbuilding/shop. Number of circuits in a panel really isn't a factor. there are 42 circuit 200A panels with feed-thru lugs, for a second 200A panel

@grounded-b937 3 года назад

@Phelebas The NEC doesn't require sufficient capacity, to power a "possible" future EV charge station. Plus 50A at 240V would be the max for a fast EV charger

@thomasprendergast6315 3 года назад

@@Jack-yl7cc wrong. As long as you know the load per code, you can have a million breakers or just the minimum, by the math.

@thomasprendergast6315 3 года назад

And, this is a 200amp service, not 400(actually only 320)

@HuckFlynn 3 года назад

DYIer with OCD here and I'm just finishing up wiring my basement. I am both just impressed as hell at the beauty of his work -- and jealous that he's at least 2-3 times faster than I am while doing it. Love watching a professional. Great video as always.