MB102 Breadboard Module alimentation 3.3V 5V | Arduino Board essais MB 102 proto
MB102 Breadboard Power Supply Module 3.3V/5V Solderless Breadboard
Cette carte d'alimentation permet de délivrer une tension de 3,3 Vcc et 5 Vcc à partir d'une source de 6 à 12 Vcc ou à partir d'un port USB (5 Vcc). L'implantation de la carte permet de l'utiliser directement sur une plaque de montage rapide (non incluse) pour vos projets.
Remarque : à utiliser avec des plaques de 57 mm de largeur.
Alimentation à prévoir:
- 6 à 12 Vcc sur connecteur alim
- 5 Vcc sur connecteur USB
Tension de sortie: 3,3 Vcc / 5 Vcc
Features
1. A convenient power module supplying especially an MB102 breadboard, supporting 5 V or 3.3 V output.
2. Input voltage: DC 6.5-12 V.
3. Output voltage: 3.3V/5V; Maximum output current: 700 mA.
4. With a power switch and indicator LED; two circuits at top and bottom for separated control - can be changed between 0V, 3.3V and 5V.
5. Uses a USB Type-A 5V output port for control board and a voltage regulator chip 1117-5.0V/1117-3.3V.
Introduction
This is a power supply module designed for MB102 breadboards. It is powered by a 5V DC jack with an input voltage of 6.5v-12V. The module has a power button and power indicator LED on board. When you press the power button, the LED will brighten and the module starts working.
The module supports the output of 3.3V or 5V. Two circuits are set at top and bottom for separated control and output can be changed between 0V, 3.3V and 5V. You can connect the two rows of pins on the module for 3.3V/5V output, and the 5V USB Type-A port can be used to supply the MCU.
With this power module, you can do experiments and start learning in a more convenient and simpler way!
www.ebay.fr/it...
26 авг 2024