Element RC Enduro Sendero - Upgrades

Подписаться 83 тыс.

Просмотров 74 тыс.

50% 1

I've waited long enough to dive in and upgrade my Element Enduro! I wanted to change up the look and add a cage, change the electronics, and install the hard plastic parts from Element RC.
ElementRC.com
#ElementRC #JourneyTheElements #WeAreAE
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc
My Camera/Production Gear:
Canon SL2: amzn.to/2iYEWNM
Canon 10-18mm lens: amzn.to/2jixGJE
Takstar SGC-598 Mic: amzn.to/2DnfZ7n
GoPro Vlogging Rig: • GoPro Hero 7 Vlogging ...
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un

Авто/Мото

Опубликовано:

29 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 180

@scalebuildersguild 5 лет назад

Fantastic, now I know how that cage goes together!

@nealstavonincaly5084 4 года назад

Scale Builder's Guild damn he still has not liked your comment 📉

@andrewdecavia7553 2 года назад

It’s like a early teaser of the VS4-10 Phoenix Portal!

@wildmangeorgesrcchannel6916 4 года назад

I like to use sticky puddy and stick small tacks to the body posts and I line it up then press down and look for the marks the tacks make and I drill body holes

@triplexrcgarage1499 4 года назад

Awesome improvement. Most definitely getting that half cage. Thanks for sharing.

@kayagon 5 лет назад

Looks really good with the cage, thanks for sharing

@MasterfulStu 4 года назад

Loved the look of that card in the back. When I saw it had a 2 piece body, that was my idea. Looks great

@CarminesRCTipsandTricks 4 года назад

REALLY good idea Josh!! The Bumpers are a bit ridiculous... but that "Truggy" Cage really brings or all together for a nice, functional look!! 👍👍 Carmine ✈🚂🚙

@andyrichey1192 4 года назад

Wow that is sweet Josh !! I like how that looks. Appreciate you sharing.

@AdventureQuest4x4 5 лет назад

Looks alot better, completely changes the look of that truck. Nice job!

@bucksrcworld8119 5 лет назад

the cage looks sweet on this, mirrors, new grill, door handles, will liven this truck up.

@tomandrews5392 5 лет назад

What a complete difference nice job....

@rw2king 5 лет назад

Its looking sweet that cage is awesome

@RevolutionX 5 лет назад

Nice, I can't wait until I get mine in hand!

@RCsRCCars 5 лет назад

Great video. I can’t wait to get my hands on an Enduro but I’ll probably wait to get the kit version when it comes out.

@drjavogel 5 лет назад

Sweet work Josh. I love the look of the truck now ... well, except for that stock front bumper, yeesh!

@1985Pinito 5 лет назад

Really thinking of picking one of these up.

@RUSERIOUS76 5 лет назад

I had a chance to drive one of these recently. Associated really did their homework on this truck. The motor esc combo really does create a smooth run. The steering servo seems to have plenty of power and didn't break in the first ten feet. I'm sure I will have one .

@mattgampfer9619 5 лет назад

Might be my first rc crawler. Looks like a sweet RTR.

@wildmangeorgesrcchannel6916 5 лет назад

Iv been crawling for a few months I wish I would have been able to get this truck for my first one. Don’t care for the gen 8 steering and I don’t care for how quick rc4wd trailfinder axels wear out. This truck is a god send

@brendanb.8007 10 месяцев назад

Wow that thing is awesome 😎

@sortafastclothing4051 5 лет назад

Really liking this truck. Might have to get one

@nessbuilder 5 лет назад

Awesome job Josh👍

@fredwaldrop3810 5 лет назад

Thank you!

@brianmoreno3 5 лет назад

Its actually an underdrive for the rear vs overdriving the front. Just ordered the kit and cant wait. Found a use for that small battery tray after seeing you put the weaker plastic battery tray mount. Can use that for a small 3s for the lights awesome.

@brianevans9328 5 лет назад

Yeah I’ll a little behind 🤷🏼‍♂️ Nice job as always Harley!

@telfow1 5 лет назад

Making me want to buy one for sure Josh. Thanks for the very good post, man.

@TangoOne 5 лет назад

Man that thing is looking sweet!

@fernsolo 5 лет назад

Looks nice.

@martinbradbury5920 5 лет назад

That looks cool

@toddbertram6556 5 лет назад

Looks good. I am still impressed with this truck it is the 1st time in several years I've considered buying another crawler

@TechnicBlakbird 5 лет назад

I hope they release a kit version that includes the upgraded plastics. This chassis looks pretty interesting.

@shadowsystemsrc9389 5 лет назад

This trucks looking pretty good.

@BTandKM111 5 лет назад

Can we buy the upgraded parts? Or do we just wait for Element to send them in the mail?

@michaelburton831 5 лет назад

Nice Josh! That vid was super fun to watch. Cant wait for the next one. I honestly laughed out loud the way you threw the back bumper off camera. Your a funny dude.

@bmccormick08 5 лет назад

I'm not a spare tire guy either. I removed the cradle, and cut out the mount for the tire itself. One of my local crawler guys cut out just the center mount portion and used CA to glue a styrene rod in, sanded and painted.

@stacygardner507 5 лет назад

looks alot better with the cage

@The1badxj 5 лет назад

super sweet bed mod. just need some cool custom bumpers to finish it off

@greggmundkowsky5798 5 лет назад

I think I am going to add this to my collection

@wildmangeorgesrcchannel6916 5 лет назад

I might be the only person who loves the look of the stock bumpers

@gabrieldyker1014 5 лет назад

Looks awesome with the cage! You could just 3d print a little tool box/hard case for the spare tyre basket and trim off the mounting holes on the cage- 1:1s tend to have a box or two around the cage/bed area.

@949Designs 5 лет назад

It looks so much better with the back half and pinched bed. Nicely done Josh 🤙🏼 I did notice that you managed to lose the indestructible mirrors😉

@NaturallyRC 5 лет назад

One of your best.

@gatovoladorup 4 года назад

Nice video!! But complete if upgrade parts link will be in the video description, thanks👍🏻

@traxrc 5 лет назад

Awesome

@AkagiPro1 5 лет назад

Hey! You can cut away that spare tire mount tab and place a piece of styrene tubing and use some star bond adhesive to lock it down, finally paint it black ! To give it a more clean look 👍🏻

@xantrios 5 лет назад

RTR = Ready to Rebuild...with even more expensive "Tuning Parts". Nice business model :)

@fencer39 5 лет назад

Replacing plastic parts with more plastic parts of a different colour !

@PhiddyPford 5 лет назад

You listen to Josh? He didn’t need to upgrade, he had it supplied. Associateds business model revolves around quality and customer satisfaction....... this is not AXIAL....

@xantrios 5 лет назад

@@PhiddyPford I think it doesnt matter what brand it is. Its the same old story with every RC car. 1. video = review = it is a great car "out of the box". 2. video = first run = and it performs great. 3. (and more) video(s) = upgrades, upgrades, upgrades... All "Scale News Update"-videos are about (expensive) upgrades...and not only here @ Harley Desings, there are 3-5 (or maybe more) other channels with nearly the same pattern...its getting "boring". And yes, he get many upgrades supplied...and I think you know why :) The only interesting/new feature of this RC car is the overdrive...and this is a really cool feature...I like it! But I want to see more custom (DIY) designs/upgrades, not only (expensive) upgrades.

@sfcmp2007 5 лет назад

@@xantrios Not sure where to begin, 1. lets just start by saying we all have jobs to make money. As I'm sure you do. Josh has a job too, to help inform RC'ers about products. Sure if I had someone reviewing my products, I would send him free upgrades to help sell more. Its a really simple business concept. 2. Upgrading your rig is part of the hobby, some people can't figure out "DIY" projects themselves so having Harley Designs or Scale Builders Guild around helps people to come up with cool ways to set up or make their own rigs look. I didn't think of attaching the rear fenders to the cage on mine until today when I finished watching this vid. Thanks Josh! 3. All BS aside, nobody can tell you how to RC, if you want to make your own tube roll cage, there are a bunch or RU-vid videos on it, don't just rely on RU-vid though. Yes upgrades can get expensive, but so are RTR trucks... Be creative! That's what this hobby is all about! Just my opinion, take it for what its worth.

@tarui 5 лет назад

Roman Xantrios this is why I wasn't keen on the trx4. Everyone says it's good then recommends expensive mods

@mikepasquale7415 4 года назад

Nice

@adamhirerc78 5 лет назад

Put some conformal coating on circuit board of receiver ,no receiver box needed👍

@frankiedelaparra9530 5 лет назад

I think I need one!

@jb3161 5 лет назад

great video josh

@ChazOutlaw 4 года назад

the cage is a great improvement. I would like to see more inner body bracing for it though.. To prolong the life of that thin lexan. I'm not much for adding on scale details either, but that spare tire mount, might be a good place for a scale radiator. to go along with the pre-runner look.

@scalefreakgaming 5 лет назад

I had the same Pro-Line ball end laying around to get to those screws.

@HarleyDesignsInc 5 лет назад

It's the only 2.5B I still have around. That thing has to be close to 10 years old!

@scalefreakgaming 5 лет назад

Harley Designs I bought that Pro-Line set back in 2012. Love it. The 2.0B is ruined, and my 2.5 handle is shot, but I still love the finish on the tools and I refuse to toss them.

@johngrant1337 5 лет назад

Looks good for a pick-up truck

@moematos1785 5 лет назад

Thank you for you knowledge & RC wisdom and techniques U make a good difference for those of us that R not too sure on which direction to go with some of these vehicles. I learn a lot from your post. I would love to pick Ur brain a little bit. Bcz Every video has helped me in one way or another.the other guys help too but I seem to understand your style or technique a lot better.

@HarleyDesignsInc 5 лет назад

I appreciate that 😎

@anotherhirsch657 5 лет назад

You could put a Hi-Jack in the back! You also should ad an interior!

@moematos1785 5 лет назад

By the way, the truck turned out really cool good Job.

@indybama80 5 лет назад

Nice job josh, looks good that way. Lookin to build my father in law a truck. Goina go with the 2 piece chevy body n try cuttin out for the cage to go inside the bed.

@rc-ingaroundamerica8792 5 лет назад

Would you do a comparison video of the vs410 powerwagon/element enduro after your done building both?

@Trip4w 5 лет назад

Great idea I will borrow it but I am not sure on the look of bedsides added :)

@mojaveadv7135 5 лет назад

You should use a round tube for the front bumper to keep with the pre-runner look. Those mods changed the entire look of the truck!

@HarleyDesignsInc 5 лет назад

Yes I have the front tubular bumper already, just have to wait a little longer.

@jessie38supercharged 4 года назад

use magnets for the light connection. when you drop the body on the lights will turn on. connect bare wire to each magnet

@bboydrummer1 5 лет назад

I really loved that servo controller you used to set up the steering. What is the make and model would love to check it out. Thanks!

@policeswat64 4 года назад

They want you to use the force for putting that cage together lol

@markclausson564 4 года назад

All these harder plastic Pieces Should be sent to everyone for free.They should have been in the kit to begin with.

@bradlycruse73 5 лет назад

Great video! Just a quick question, will that proline cage work on a TRX4 Sport? Thx

@BDcumminsdiesel 5 лет назад

Dang man that dies look good

@linhof4 5 лет назад

Where do you get the servo centering box/programer? I think that would be very handy to have.

@year1camaro 5 лет назад

Ya gotta wonder how much more the better plastic costs to use over whatever they used for the released version

@ConditionZero76 4 года назад

Nice build, any thoughts on going even more on the T gears 25 - 55 etc to get even more front over drive? if so what would you recommend? Thanks

@marinearmeni 5 лет назад

If you placed the BTA link on top of the aluminum high steer arm would that allow you to run more caster without interference?

@JK-qv8sv 5 лет назад

Print up a tailgate that attaches those floppy back fenders together, that mounts to the back of the cage. Maybe an integrated handle and an italicized Sendéro emblem somewhere on there too. Or even better, an Associendéro emblem 😂

@tomlucasrccrawlers9108 5 лет назад

Looks good Josh. Next mod , i'd make velcro body mounts. And take some scale aluminum diamond plate and Shoe-Goo it to the lower door panels. The cracked lexan looks like the cheap stuff that RC4WD use to make their lexan(not hardbody) Mojave bodies....it would crack sitting on the shelf. Would you trust those plastic gears on Brushless power?

@PhiddyPford 5 лет назад

Josh, go to the stash, grab an orginal VS4 front bumper.....Looks great, problem solved!

@robertmartin4135 5 лет назад

This would have been nice for a budget build with Matt.

@josbarhorst6574 5 лет назад

@Josh: why oh why is this thing not called an Associated? I feel it would have made a bigger impact...

@vincelemasurier7464 5 лет назад

Jos Barhorst It’s actually a great move to keep it away form their race Gear as it’s completely deferent to their racing department

@josbarhorst6574 5 лет назад

@@vincelemasurier7464 sorry to dissagree... they even could have called the CR10 since they already have a 1/12th crawler the CR12... The first time I heard about it I though meh... it's fine. But now the upgrades are coming.. it's an Associated. Well... should have been, in my opinion.

@astrokeofgenius1 5 лет назад

It would look cool to run some rotopax on the spare tire mount.

@laneboothby4871 5 лет назад

Nice truck love it I run a trx4 defender

@awe_rc8380 5 лет назад

Looks real good i think.. Fun to see what front bumper you go for!.. Fast work to:) where can i find that servo controller?

@evoone3039 4 года назад

use the vp origin pro front bumper. I used them on my element

@tommyhammel 5 лет назад

Your rear right tire is coming off the rim and get the rc4wd patriot jack for it

@gmummy 5 лет назад

Nice vid. Where do you find those futaba air receivers?

@garettbodel3002 5 лет назад

Cool video man I like the cage looks great I would have left tailgate though. I love the point where you said small victories. Kick ass.! Have you thought of putting the winch out front to run off the servo Mount that they have there and see how well they designed it. Looks like it's going to be great truck I bet it's going to be huge. Some people have commented about aftermarket stuff but. Being that Team Associated. Is the mother company. I don't see how anybody can think that they won't be everything you can think of for this truck very shortly. Anyways you do really high class videos great job.

@00godlovesus 5 лет назад

Good morning that was fun:) quick question about the Ripper will those front headlights handle and radiator fan handle a 4s??

@henkiepda 5 лет назад

hi .this car is better then trx4 sport?very nice upgrade!!thanks

@sgrandmasterj 5 лет назад

Does that electric driver have adjustable power? If so what is the model number?

@sortafastclothing4051 5 лет назад

Oh, and check your beads... 😎 looks like one isn’t fully seated.

@TheYellowstreetrod 4 года назад

Any new updates on mods or upgrades? Is vanquish planning on making any parts?

@fredbradick8404 Год назад

when you first got your rig did it already come with front headlights installed ?

@jasonsmithsrrcfun9259 5 лет назад

You are just incredible

@NikkiNexo777 5 лет назад

How does this truck drive the way you have it set up now after the upgrades compared to the TRX4 sport kit you upgraded with Matt?

@emilgabl9069 3 года назад

How does this compare to a Trx4? I trying to choose between the 2? Can u help me out with choice?

@tjlqk3 5 лет назад

How’d this compare to the Axial 10.2?

@samintrepid 5 лет назад

What did you think Harley about the 48p gear if you put brushless motor ? traxxas, Red Cat Gen8 and axial have already 32p gear much better for brushless :)