With Raize canbus box you have (I have same canbus box) there should be canbus settings for Peugeot/RCZ/Keep Screen. Don't know if it will make any difference but mine has RCZ listed, no need to use 308 or 3008. I also took it apart and added much louder 12v buzzer for parking sensors. The one fitted runs from 3.3v and is too quiet.
Hi yes I have poor reception but the reason is because there are 2 aerials in the RCZ but you can only connect to one of them , I'm doing a video soon which will show how to fit a double adaptor to fit both aerials at once if yours is the same 🙂
Great video. I have the standard one from 9inch screen,and i cant set my clock. And i have gone to canbus settings,and select Rcz,and still cant set clock.
Hi , thanks so much for your comment ☺️, yes this is because you have the wrong canbus box installed , the correct canbus Box you can find here Just found this amazing item on AliExpress. Check it out! £8.25 50%OFF | QSZN Android Car Radio Canbus Box Adaptor PSA-RZ-01 For CITROEN MPV TEPEE 307SW 408 408SW 408CC 3008 16 PIN a.aliexpress.com/_mtvzlC8
@@joaofury3 Mine has the top screen,and that screen cant work on any android multimedia,doesent have an option to connect to it,so you like me,will be without that screen.
Funny enough I have got a very small drain issue which I'm investigating. I suspect it's a faulty lock mechanism which has been on the car since I bought it, but I'll let you know what I find 😊
You can set unit to fully power down when ignition is turned off. This uses little power, but unit must fully reboot every time ignition is turned on. If you have it in "sleep mode" unit will power on instantly with ignition, but drains battery as it never turns off.