Elevator / Lift Simulation Using HMI Mitsubishi GOT2000 and GX Works2 PLC Software FULL (PLC + HMI) 

@@admgerson1 Thanks For Watching this Video

@@automationliker Estou montando todos os exercícios com lâmpada, todos funcionando perfeitamente. 👏👏👏👏👏👏

Can you send me the file you wrote? ❤❤❤

@@ATOM_potensic just watch this Video till end, you can follow program in this Video and make your own Program

@@khalfallichokri4005 Thanks For Watching This Video

Thanks for watching this video...

There's a little difference if you want try for real Elevator/Lift... 1. You must Change D0 and D1 with Output Y For UP/Down Elevator.. 2. You Must Add Limit Switch Every Level Elevator and Use X address

​@@automationlikerthanks alot

1. Check your communication configuration with PLC 2. On 25:37 change maximum value from 100 to 10.000 (100x Higher) Change Value Comparison 100x Higher too.. Ex. Before : > D1 K19 after : > D1 K1900 Do that thing for all comparison... That because Increase data too fast if we use Real PLC and GOT

@@Yveszeng77 < D1 K38 Means Data D1 Less than 38.. For Comparison Detail tutorial Click This Link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w3ErFSIZahs.html Or this link for Comparison GX Works3 Tutorial ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-APi_QFNtzbM.html

@@mahadevikharade1683 Right Click Global Device Comment >>> Click Write to CSV File >>> Click OK >>> Type File name and Save

This is Lift simulation project like real lift, if you push floor button, lift will move to that floor.. Ex. Ground floor

how can i contact with you ? i would like to ask you more , @@automationliker

@@automationliker could you gimme some file of this project, i'll pay

@@lamng.156 i'm sorry i can't, You just watch full this video... In this video PLC program and HMI have been explained in detail.. You can follow program PLC in this video...

Ok.. Thanks for watching this video...

@@team_fighters173 you must Have GX Works2 Software

Level 3A = Level 4

See my playlist JOB PLC Exercise... That PLC exercise for beginner.. Maybe you can learn PLC from that video...

@@automationliker ok thanks

It's Confidential and Not important...

This video maybe can help you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ttKvhyMm0Ho.htmlsi=0AhyEwJEh3oDIGBr

​@@automationliker I need comment file which was used in this video Not the video link for how to upload comments 😅

You just make comment manually one by one