Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .
Hi Justin, thanks for taking the time to make the video. I have a BMW 5 series 54 plate that keeps chucking up transmission problems but when the AA come out and clear the transmission fault codes it works perfectly fine again. Do you know if you can clear transmission fault codes with this device? Thanks in advance. Richard
Richard Hills Jr I hear some Chrysler vehicles have a similar issue caused by a faulty ABS tone ring, it could also be a transmission solenoid malfunction. hoefully you fix it soon
JJ ADVENTURES ^^ Can this bluetooth OBD2 Adapter work with any apps on your phone or only works with certain ones? Which Bluetooth OBD2 Adapter would you recommend that is good and works compatible with any app?
Sir, after I plugged in my obd2 scanner I get this error message "no internet connection" also where can I find the passcode or the key wherein your is 123.....8 . Thanks.
I own an 08 deleted f350 that has been tuned through the obd2 port it's also diesel much of the exhaust and egr systems was gutted . Will it still work or can it cause any problems or or drivability issues?
do you need a wifi conection from a wifi router of amobile phone company or so?or it just creates a wifi spot betwin the adapter and your phone or android ?
Hi , I have 2 questions if I may. 1) Does it drain the battery when you leave it connected but not used? Some go into a low power sleep mode when unused. 2) Is it possible to change the wifi password?
@@simonwarmer8777 OK, the dongles are always compatible, (its the ELM version 1.2 from memory, that is an oder version, or you will have to find the PIDs and set up some formulae, I had to do this to get some things like Trans temp.
don't know if this helps anyone- mine is wi-fi only. i shut off my home wireless (phone kept connecting to it otherwise) then it found the elm327 adapter.
The apps have a list. you just choose your car. I can say if they have your car, I dont own that one, but most are the same. ie all Toyotas seem to use the same protocols.
+Justin Okey thanks! I'm looking for the 2.1 for iPhone, but don't seem to find any. Do you have a seller you can recommend either for the 2.1 or 1.3? :)
Test your obd 2 plug for power and ground if none check the fuses that go to it and if car dont run check fuses that go to ecm and for power and ground to the ecm
+pb, no, these are power hogs. I left one in my car and the battery was drained in a day. The fancy ones from scantool.net will go into power savings mode.
Liberaldo Tedjo I have the same obd2 wifi scanner, after I plug in I get this error message " no internet connection". Why is this so. I entered the same parameters but I can't find the passcode he said in this video. Pls help.
Bong Gakaday ~~ by default, it will go off of the DHCP settings. Did you change it from DHCP to Static in the wifi options? Is your sensor flashing when you have the key turned on without the motor running? Also, in the app make sure when configuring the wifi that the ip is set to 192.168.0.10 and the port is set to 35000.
CAN = Controller Area Network. Its the BUS and communications method modern cars use. its what the dongle is tapping into. Its a message based system. It looks for the oil pressure message for example and grabs the value.
As long as its on the BUS. You may need some different formulas to get it to work. Some Apps have these inbuilt, but if not you have to work it out or find the info on the web. eg For my Toyota I had to find the PID and formula to capture the Auto trans temp. the PID is the message header, its what the app looks for to capture the info.There is plenty of info on the web if you do a few Google searches.
ALI Ahmead I don’t remember as I don’t use it any more. There are better ones. Now I use OBD Fusion. There are heaps in the store. Lots of free or trial ones.
its fucked up cause s expensive and you also need internet conection to conect !!!!!! better i will buy the obd elm with usb version that comes with an cd you instal the software and you are on the go !!! MONEY MONEY MONEY ....sometimes the tehnlogy is just plain stuppid is maded to fuck up money
+dan lease You on Drugs? or have no idea what you are talking about? Its the cheapest and no need for an internet connection.. I have a Techstream as well. More expensive, but can do more.