Тёмный

Emax Tinyhawk 2, is it better than the Happymodel Mobula 6? 

TweetFPV
Подписаться 9 тыс.
Просмотров 27 тыс.
50% 1

Tinyhawk 2 vs the Mobula 6 with actual data! My times were captured with the Delta5 FPV race timer created by Scott Chin. My results are comping both quads tuned the way i like them to fly. This is about as apples to apples of a completion i could come up with and your results may vary.
Tinyhawk 2: www.banggood.com/custlink/DKG...
ISDT UC4: www.banggood.com/custlink/vmK...
Mobula6: www.banggood.com/custlink/D3m...
packs: www.banggood.com/custlink/vmK...
Here is a link to my Betaflight dump. Be sure you are on the correct version of betaflight. This was setup for also using the JESC 48khz PWM ESC firmware as well. Also your modes should be on a 3 position switch so rate profile 1 is using pid profile 1 rate profile 2 with pid 2 and rate 3 with pid 3. drive.google.com/open?id=1IWK...
I will be giving away my old Emax Tinyhawk S over on my Patreon page. Head over there and show me some support. / tweetfpv
Help support me by clicking through this link the next time you purchase from banggood. www.banggood.com/custlink/Kmm...
These videos take a lot of time shooting and editing. If you like my content, please like and subscribe. Leave a comment if you have any questions. Thanks for watchin'!
Help support me by clicking through this link the next time you purchase from banggood. www.banggood.com/custlink/Kmm...
If you would like a set of your own radio grips please visit my Etsy store: www.etsy.com/shop/DEPrinting
GetFPV referral link: www.getfpv.com/r/97054/
If you really want to support me, head over to my Patreon page: / tweetfpv
If you need one-on-one troubleshooting for your equipment, come over to Discord and I can help you out: / discord
Buy me a beer or two: paypal.me/TweetFPV
Like me on Facebook / tweetfpv-100489554756112
Follow me on Instagram / tweetfpv
If you're looking for a great precision screwdriver set for working on your drones, I use and recommend this one:
www.amazon.com/gp/product/B07...
Thank you and keep flying!
Note: The links above are affiliate links. By clicking one of them before you purchase anything on Amazon, or banggood you're helping support me making videos for this channel.

Наука

Опубликовано:

 

17 янв 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 166   
@brianclevenger4255
@brianclevenger4255 4 года назад
Subbed. Good point on the camera distortion creating a sense of greater speed!
@M.Maxlev
@M.Maxlev 4 года назад
Subscribed! Love to see you play more about TH2 :)
@sakfpv8444
@sakfpv8444 3 года назад
I just bought a mobula 6, it's my first whoop and started looking stuff up and found your channel. You got a new subscriber!! I've been flying 3" mostly because it's perfect for where I fly, but I recently moved and just needed something to tool around the house and the yard. Kind of sad I didn't get the tinyhawk after watching this video, but am glad I found your channel anyway!!
@TweetFPV
@TweetFPV 3 года назад
The mob6 has been a great little Quad. Just get a betafpv meteor65 frame for it when it breaks.
@MCsCreations
@MCsCreations 4 года назад
Awesome flying, dude! 😃 Great review and comparison!
@dronereviewman9580
@dronereviewman9580 4 года назад
Man i really like all these e max whoops!!!! Can't wait to get my hands on one!!!! Woke up to snow and rain.......makes me sad that i cant fly and haven't been in the air in weeks!!!! But i have the kid this weekend so wouldn't be flying anyways. Great post brother!!! I like stuff like this so we can tell what one is best!!!!! Have a good day!!
@Alexander-cu6bd
@Alexander-cu6bd 4 года назад
Great content, made sure to subscribe because your Etsy page has great reviews. Definitely going to be getting some grips for my x9 lite.
@TweetFPV
@TweetFPV 4 года назад
Awesome, thank you!
@andytaylor3321
@andytaylor3321 3 года назад
just got one for my bday today dude cant wait to maiden it....thanks for the advice buddy
@TweetFPV
@TweetFPV 3 года назад
Happy birthday!
@josephbove7477
@josephbove7477 4 года назад
What a fantastic review. I was so impressed with this quad I bought two of them. It is so precise in its flying you can go through the smallest gaps with laser guided precision. I have other quads and have not flown any of them since it has arrived. Yes it's heavier but WOW does it fly well!!! Been flying mine on the GNB 520 packs. Cruising time with a full hv charge is nearly 5 minutes. Love the channel. I will join as a patreon soon!
@ryansilver9601
@ryansilver9601 2 года назад
Can't tell which drone you're talking about 😭
@TweetFPV
@TweetFPV 2 года назад
Tinyhawk
@Forty5Kimber
@Forty5Kimber 4 года назад
I have TH II that I flashed JazzMaveric 48khz, RPM Filtering and was completely amazed, getting.45 sec to min more flytime than stock on 520mah 1s and 300mah 2s. Much quieter and smoother...I am really happy and kind of impressed! Thanks for sharing.
@TweetFPV
@TweetFPV 4 года назад
Whoop on buddy!
@ChrisParayno
@ChrisParayno 2 года назад
I'm still running this setup in 2022. Handles great on 2s and is a real rocket.
@whatisthis922
@whatisthis922 3 года назад
THANKS FOR THE REAL TIME TRIAL!!!! It makes sense with a smaller camera it would seem faster to the eye but I just couldn't figure EMAX would make a slower drone with less performance than its predecessor. But all the other reviews say it is slow and lacks quick response. THANKS I SUBSCRIBED because you really timed it and gave TRUE performance. YOU ROCK!!
@1LN
@1LN 4 года назад
Awesome man, I can’t believe how good my THS2 flies now, Thank you sir!!! You got a setup for the TH freestyle??
@TweetFPV
@TweetFPV 4 года назад
The th freestyle I flew as it came. It really didn't need any tuning.
@shawnpatrickblue9494
@shawnpatrickblue9494 2 года назад
Thank you sir I appreciate your time and effort
@TweetFPV
@TweetFPV 2 года назад
Thank you
@williamtam6732
@williamtam6732 4 года назад
Thanks for the numbers. They don’t lie.
@TweetFPV
@TweetFPV 4 года назад
thanks for watching!
@kacimierz
@kacimierz 4 года назад
Thanks for the review, thumps up.
@TweetFPV
@TweetFPV 4 года назад
No problem 👍
@CanadianKayak
@CanadianKayak 4 года назад
Great video
@TweetFPV
@TweetFPV 4 года назад
Thanks!
@dan71559
@dan71559 3 года назад
good review. subscribed.
@TweetFPV
@TweetFPV 3 года назад
Thanks for the sub!
@SquirrelLover...
@SquirrelLover... 3 года назад
Great Video Thanks :)
@daryoushborja5115
@daryoushborja5115 4 года назад
Thank you this helps me out. 1 year into FPV. I'm buying a Tinyhawk 2. I have the tinyhawk 1 and love it.
@GhostOfAnubis09
@GhostOfAnubis09 3 года назад
That quad name in the CLI dump, well played!
@TweetFPV
@TweetFPV 3 года назад
😂
@CarbonGlassMan
@CarbonGlassMan 3 года назад
I can't wait to get mine in the air again. I was just learning acro mode when this thing died on me. Now I'm getting decent at acro and really look forward to flying this in acro. AIO board should be here tomorrow.
@TweetFPV
@TweetFPV 3 года назад
Awesome! This hobby is so darn addictive I have to make sure I have backup quads.
@CarbonGlassMan
@CarbonGlassMan 3 года назад
@@TweetFPV Oh man, I know it. My TH2 is down, my TH Freestyle is down. I only have one 3" build to fly right now and I'm terrified of breaking it because I won't have anything to fly until parts come in and I fly every day. It is very addictive.
@peterkennethnuevo7969
@peterkennethnuevo7969 Год назад
Great video! I'm a beginner, Would it be better to buy the Rtf version of the Tinyhawk II or a bnf mobula 6 flysky version? I have a FS-i6x transmitter. And I'm considering buying the Eachine EV800 Dm to go along with the mobula 6 and my transmitter. Hope to hear your thoughts!
@johnnymiao7853
@johnnymiao7853 4 года назад
Awesome test. I like your methodology. And would you mind to share your tuning profile? I feel the mockingbird setting is too twitchy as well as consuming battery.
@TweetFPV
@TweetFPV 4 года назад
A link to my tune is in the video description.
@carcomp101
@carcomp101 3 года назад
@ TweetFPV I've noticed a lot of folks say the TinyHawk is unflyable on 2s... Try this. On you transmitter, set on of the pots up so it divides the throttle position by a certain percentage. I've done this, and when I swap to 2s, I simply twist the knob all the way and 100% stick is not the equivalent of the old 50% stick. Makes it SO much more fun.
@TweetFPV
@TweetFPV 3 года назад
That is a great idea!
@michaelmatthews6421
@michaelmatthews6421 4 года назад
Awesome, just what I needed to know
@joshlizee
@joshlizee 4 года назад
Do you still have it? I want to buy the tinyhawk 2 for indoor usage as we can't fly outside lol. Let me know!
@djs134
@djs134 4 года назад
To bad they didn’t use the nano 3 for weight savings. That way you’d get similar performance to the s. Wow I commented before I finished the video. I’m surprised the 2 was faster. Maybe the 2 with a nano 3 to get that fast feel. I mean I get 4:20 of racing on my s, and I thought the 2 only gets like 2:30 to 3 min. What type of flight times are u getting in the 2? I did the 48khz and pmb on my s and it’s so locked in its amazing.
@scottgivens27
@scottgivens27 4 года назад
I totally agree with the build quality of the Mobula 6! Mine is about to be the most expensive mobula 6. I literally got it yesterday. On the 3rd flight, I hit the wall in my house and the freakin camera popped off and now i can't get it to focus for anything....And the so called durable frame is not so durable. I broke 2 of the front struts. So I already have a $21 runcam nano 3 coming in (actually ordered 2 because they are so fragile) so $42 and I bought a set of Betafpv 65mm frames on Amazon for $9. They actually seem much more durable than the mobula 6. My conclusion. 1) I'm not a great indoor drone flyer if I can break this so called durable drone in 3 flights. 2) Some Reviewers are not being 100 percent up front with the quality control issues of this drone. Thank you for your honest review! looks like I will be picking up the Tinyhawk 2 as well.
@tc3man0
@tc3man0 4 года назад
I use the. Racerstar 1535 props no prop issues at all they do not come off as of yet gets rid of the prop problem
@TweetFPV
@TweetFPV 4 года назад
You are using the 1535 on the tinyhawk2?
@prettyboy1970
@prettyboy1970 4 года назад
Can you do a setup vid for Tiny Hawk 2? Just got mine and it doesn't work worth a crap.
@droneready8278
@droneready8278 3 года назад
Awesome...what kind of flight time for the Tinyhawk 2 if you're just chill flying?
@TweetFPV
@TweetFPV 3 года назад
Hard to say 4-5 minutes when flashed with 48khz esc fw. 3 min with the stock esc fw on 1s
@CX2Pilot
@CX2Pilot 3 года назад
I just got the TinyHawk 2. It is a great drone! Very stable, smooth, quiet and has good power. I used your Mockingbird settings and they are great! Super responsive and locked in. I also installed the JESC 48khz firmware. I am getting 4 minutes flight time on the 1S 450mAH battery and over 5 minutes with a 1S 525 mAH battery. I haven't tries 2S yet. Thanks for posting your custom Mockingbird settings. The stock settings are good, especially for beginners, but the Mockingbird settings turned it into a super responsive drone! One thing I want to point out. Emax has gone back to the motor plugs, the motors are no longer direct soldered to the FC board. Even the Emax video now shows motor plugs. Mine has motor plugs. I see your video and other reviewers has soldered motor connections. They must be from the first batches of the TH2, then later on in the year sometime they changed to motor plugs in the newer batches.
@stelic9515
@stelic9515 3 года назад
HII and thank you for share your experience. ASK you how strong is, how strong are the props. HOW fly outside. For me the most important is to be strong.
@TweetFPV
@TweetFPV 3 года назад
The mobula 6 with the 25,000kv Motors would be my choice for flying outside. The frame will break easily. Replace it with the Meteor 6 frame from betafpv. Neither of these small Quad will work well outside it there is any wind, they are too small, light, and low power to handle much wind.
@CX2Pilot
@CX2Pilot 3 года назад
​@@stelic9515 Hi, the TinyHawk 2 is very durable. Check out the reviews here on RU-vid and on the forums like Rcgroups. I don't know how strong the props are yet but I hit my fence pretty hard and no frame or prop damage, not even a scratch or scuff mark on the frame! I was flying outside in strong wind and got blown into the fence flying FPV with my googles. TweetFPV is correct, These small quads get blown around in wind, too small and light. I had the Mobula7 for years. I did not like it and threw it out and got the TinyHawk 2 which I like much better in every way. One issue with the Mobula7 new out of the box was the motors rattled which made them sound like cheap junk motors. This was irritating every time I flew it... I took them all apart and oiled them but they still rattled. The drone also would shake in a hover which a lot of people were having and mentioned in the forums and here on RU-vid, but I completely got rid of that in the PID adjustment. It was then super smooth!
@TweetFPV
@TweetFPV 3 года назад
I had a mobula 7 and is was also not a good Quad. For flying acro outside the mob6 was more able to do the acro type flying I like to do. Mainly to the traditional prop layout and lower weight.
@CX2Pilot
@CX2Pilot 3 года назад
@@TweetFPV The Mobula6 is getting good reviews from what I have seen. I thought about getting it but decided to get the TinyHawk 2 instead. And with your settings it turned it from mild to a very responsive and locked in super drone! It also helps with outdoor flying in the wind as I can get the nose way down to help pull it through light wind.
@snakefich
@snakefich 4 года назад
Thanks for the vid, can you please do a vid. on the JESC 48khz PWM ESC firmware upgrade for the tiny hawk s,2.
@TweetFPV
@TweetFPV 4 года назад
It's in the works.
@snakefich
@snakefich 4 года назад
@@TweetFPV Great, thanks
@choanlpoto
@choanlpoto 3 года назад
Yes please where can we find it ?
@angrypepper3325
@angrypepper3325 2 года назад
Great video Tweet, I own both and as far as I’m concerned the TinyHawk blows the Mobula out of the water. Too me the TH flies so much smoother and as a beginner my throttle control isn’t the best, but the TH seems to be the easiest micro quad to control.
@TweetFPV
@TweetFPV 2 года назад
Totally agree
@Camel-Consultancy.
@Camel-Consultancy. 3 года назад
Can i use the radio and goggles I got with the EZ pilot kit for the TH2 or do I need a different one, thanks.
@TweetFPV
@TweetFPV 3 года назад
The goggles are universal and can be used with just about any 5.8ghz transmitter that can be found on most fpv quads. Unfortunately the controller is a proprietary communication standard that is only going to work with the ez pilot. So you would need to get a new radio. A great entry option is the betafpv literadio2. betafpv.com/collections/tx/products/literadio-2-radio-transmitter?sca_ref=360201.IdW7j0Cv8A
@CX2Pilot
@CX2Pilot 3 года назад
I would like to add your modified settings to my RC website if okay. I also have PID's for a few different drones and some Betaflight tuning tips.
@TweetFPV
@TweetFPV 3 года назад
Absolutely! What's your website?
@CX2Pilot
@CX2Pilot 3 года назад
@@TweetFPV Okay thanks. I posted your settings with a link to the download file and your video. I made my web site which I can edit fast. I also have Pid's for the Mobula6 if you want to check them out. (www.) RcProReviews (dot com). On the home screen look for "Betaflight Pid's". In the drop down menu select " Emax Tiny Hawk 2 PID’s:
@InfinityDrones
@InfinityDrones 2 года назад
Hi there, I'm pretty now to FPV and would like you clarify what you mean by: "your modes should be on a 3 position switch so rate profile 1 is using pid profile 1 rate profile 2 with pid 2 and rate 3 with pid 3." I'm currently flying 1s and use pid profile 1 for that and I change my by switching between rate profiles(just to try different ones). Pid profile 2 is for 2S if I remember correctly. Why are you saying we need to put it on a switch and use 1-3 pid profiles?
@TweetFPV
@TweetFPV 2 года назад
Because using a 3 position switch is how the people at emax designed it to work. If you know what you are doing with betaflight you can change this to work however you want.
@InfinityDrones
@InfinityDrones 2 года назад
@@TweetFPV Okay, I thought we wanted to stick to a pid profile for 1s and a pid profile for 2s. Then be able to switch between angle, horizon and air mode with the switch.
@TweetFPV
@TweetFPV 2 года назад
I can't remember exactly but I think this setup from emax used cell count to change pid profile automatically for 1s ans 2s.
@InfinityDrones
@InfinityDrones 2 года назад
@@TweetFPV Thanks for the quick response! yeah you are correct, they do switch. I've just checked your CLI and was wondering if I should use pid profile 2 or 3 when flying 1s batteries. You mentioned that it should be set up on a switch to switch pid profile and rate profile... I was wondering if you meant that our modes should be on a switch for stab, horizon, and acro. So I'm still not 100% what you meant. Sorry if I'm being retarded and just being dumb.
@TweetFPV
@TweetFPV 2 года назад
I'm assuming that I was saying to put your flight modes on a 3 position switch because that was how emax had set the Quad up from the factory. And I think the rate profile changed with your flight modes automatically if you were using the correct aux switch that emax intended you to use. All these things can be changed to your liking. The pid profile should be automatic, from what I remember pid profile 1 was for 1s and 2 was for 2s. I don't think they used pid profile 3 for anything and I would guess that it is just bf stock pids.
@novcon
@novcon 4 года назад
Do you have the STL for the camera for the TH S. I love your videos and appreciate your help getting me started in the right direction. I now have a Tinyhawk S and a Jumper T16. I've been flying Velocidrone using the tinyhawk s and I'm doing way better, but in the real world, I'm have problems controlling the throttle. I'm trying to find out how to tame it down either on the radio or in Betaflight, but I'm not sure how to do it.
@TweetFPV
@TweetFPV 4 года назад
In betaflight you can scale the throttle down but in all reality it will just come with more stick time.
@vikingdane9757
@vikingdane9757 4 года назад
@@TweetFPV Also seeJoshua Bardwell's vid on presetting throttle to a slider/knob ( I use "S1" on the T16) for just that reason.
@SuperGamer133
@SuperGamer133 4 года назад
I'm new to fpv I started with a e010 with fpv camera and it was awesome I just recieved a tinyhawk 2 rtf kit as a gift and I put the jesc 48khz thing but not the license version so would I just have to purchase the licences and copy your cli to work my tinyhawk is on 4.1.0 betaflight thanks in advance
@TweetFPV
@TweetFPV 4 года назад
yup
@SuperGamer133
@SuperGamer133 4 года назад
@@TweetFPV it flys awesome man thanks again feels like a whole new quad
@kalinkha
@kalinkha 4 года назад
U cant put em same whoop bucket. Would u compare 4" vs 5" quads on speed wise? But rekon Emax of course over Happymoo😉
@TweetFPV
@TweetFPV 4 года назад
They are marketed against each other. Based off solely prop size yea I agree with you but there are other factors that make these two very competitive against each other.
@angrypepper3325
@angrypepper3325 2 года назад
Hi Tweet, hey I’ve just now started reading about the 48kHz tune and the steps to take to use the JESC download. I’m just wondering, if after I do the JESC 48kHz tune, then use your dump, will the dump already be set to a 3 pos. switch, or do I need to setup a switch first that activates the first, second, and third pid and profile rates. I hope I asked this correctly without being too confusing. Any input on this would be greatly appreciated. Thanks much.
@TweetFPV
@TweetFPV 2 года назад
It should be set to use the bf adjustments on a 3 position switch but you'll jus thave to make sure you assign the correct one as my radio layout might be different than yours.
@angrypepper3325
@angrypepper3325 2 года назад
@@TweetFPV o.k. I understand that, thanks very much.👍
@TweetFPV
@TweetFPV 2 года назад
Good luck. If you have any questions hit me up on discord.
@angrypepper3325
@angrypepper3325 2 года назад
@@TweetFPV Thanks, will do.
@EnhancedNightmare
@EnhancedNightmare 3 года назад
Hey man, would you say its worthwile to flash different settings for absolute beginners?
@TweetFPV
@TweetFPV 3 года назад
You can but most beginners can't flash without ruining things.
@jackjones7058
@jackjones7058 3 года назад
Do you suggest mobula six over tinyhawk s for a begginer? Does 25kv last less time over 19kv? Thanks a lot
@TweetFPV
@TweetFPV 3 года назад
The tinyhawks is certainly easier to fly and Lear how to fly on. For a more advanced pilot the mobula 6 is probably the way to go. The 25,000kv varrient will get slightly lower flight time than the 19000kv version but imo If you were an advanced pilot the 25,000kv would be better in the long run. Flight times can be made better by installing jesc and changing the pwm frequency to 48k.
@jackjones7058
@jackjones7058 3 года назад
thank you a lot
@simont3686
@simont3686 4 года назад
Of course the mobula isn´t fast if you fly in stability mode. But I think everyone flies what he likes. Nice vid.
@adammcdevitt8570
@adammcdevitt8570 4 года назад
I haven’t broken a prop yet I’m starting to wonder why I bought two extra sets.
@TweetFPV
@TweetFPV 4 года назад
You will!
@jeffreestylefpv5907
@jeffreestylefpv5907 4 года назад
dude I have both and the tinyhawk 2 has so much more control and I cant figure out why.
@TweetFPV
@TweetFPV 4 года назад
I'm finding the th2 is better in angle mode but the mob6 is better in acro mode.
@ricardo7814
@ricardo7814 3 года назад
What about the flight time? Which one gives you more flight time per battery?
@TweetFPV
@TweetFPV 3 года назад
The tinyhawk 2 is a little longer.
@El_Muffy
@El_Muffy 13 дней назад
Why u fly stabilized indoor?
@kaelstokes5804
@kaelstokes5804 2 года назад
Can NewBeeDrone Nitro Nectar 1s lipo batteries work on a tiny hawk 2?
@TweetFPV
@TweetFPV 2 года назад
Sure but they night be a little low on capasity.
@jerwallzz
@jerwallzz 4 года назад
Great review, thanks, I disagree about one thing though, it is worth the upgrade to the V2!
@TweetFPV
@TweetFPV 4 года назад
Yes. The camera alone is worth the upgrade, if you are just flying for fun then fly what you already have.
@uberkelvin
@uberkelvin 4 года назад
All the electronics of the tinyhawk s except the camera fit into the tinyhawk 2 frame. Any 14mm nano fpv camera will fit inside the TH2's pod. I did this 'upgrade', also fitting a caddx eos2 after breaking my tinyhawk S frame and not being able to find a like for like replacement :D
@effni
@effni 4 года назад
How is it compare to Happymodel Mobula 7?
@TweetFPV
@TweetFPV 4 года назад
WAAAAAY better in almost every way compared to the mob7
@Itsdarts
@Itsdarts 4 года назад
I get the ‘something went wrong’ error message trying to play the vid. :-(
@TweetFPV
@TweetFPV 4 года назад
No, the video should be fine. RU-vid must be having some issues.
@smdemmery
@smdemmery 4 года назад
Same problem here, the ads play ok then the error
@kalinkha
@kalinkha 4 года назад
Th2 has nano2 vs best cam of size nano3 on mobula. But rest of it of course better on Emax.
@markomax9999
@markomax9999 4 года назад
My Trashcan order was cancelled and now Im whoopless...is it possible to order TinyHawk2 for FreeSky? Im loosing my mind here and TH2 seems like a good substitute. Thx man
@TweetFPV
@TweetFPV 4 года назад
Banggood tried 3 times to send me a trashcan for review. Eveytime it hit hk customs it was confiscated. I guess exporting drones out of China is considered contraband (according to my bg rep). The th2 or mob6 are honestly better options than the trashcan.
@TweetFPV
@TweetFPV 4 года назад
www.banggood.com/custlink/DKGvsOG9me
@markomax9999
@markomax9999 4 года назад
@@TweetFPV Im more than stunned by your swift and detailed answer. Bless you. BUT since it's 2am here, Im tired and I made a mistake. I dont have Frysky but FlySky AFHDS 2A tx. It is FS-i6S. If TH2 can bind I would buy it instantly. I hope -_-
@TweetFPV
@TweetFPV 4 года назад
Unfortunately the tinyhawk 2 is frsky only. You can solder in a flysky rx if you really wanted to but the mobula6 does have a flysky option
@ferfzero4333
@ferfzero4333 4 года назад
Built-in Rx are crap, you're almost always going to be better off with an external nano Rx in whatever protocol you prefer. Happymodel makes Flysky BNF kits, but a Flysky FS-iA8x is less than $20 and has about 4x the range. Once you snip the plug, it only weighs about .6 grams with the antenna!
@quintinraymond1210
@quintinraymond1210 4 года назад
I am getting 4-4.5 minutes flight times right out of the box.
@quintinraymond1210
@quintinraymond1210 4 года назад
It turtle modes great on 2s, even with the original 3 blade props.
@TweetFPV
@TweetFPV 4 года назад
Yea 2s is good but most people racing indoors will be on 1s and turtle mode works but isn't great.
@ferfzero4333
@ferfzero4333 4 года назад
Second that... My THii gets almost exactly 4:50-5:00 flight times on 1s. 2s gets 3:00. I added a Flysky nano Rx, and removed the LED strips and stock antenna, so very close to stock weight.
@deaf.dumb.blinded
@deaf.dumb.blinded 4 года назад
Is your mobula 6 the standard or race edition?
@TweetFPV
@TweetFPV 4 года назад
Standard. But I do have a race one now as well
@andresbarajas3168
@andresbarajas3168 4 года назад
What is your opinion on both?
@TweetFPV
@TweetFPV 4 года назад
If you were going to get a mobula 6 get the race version.
@snoopyfpv8549
@snoopyfpv8549 4 года назад
You are dealing with 2 separate classes. I don't think it's fair to compare the two.... And you have a custom tune on the TinyHawk, you need to be fair with your comparisons. I normally love your videos, but I'm shaking my head at this one. Compare the beebrain with the Mobula6. They are the same class.
@TweetFPV
@TweetFPV 4 года назад
You are right. They are in two different classes. The mobula is a tinywhoop class and the tinyhawk is a micro class. But it is fair to compair them because they are marketed against each other. Most multigp indoor races are a open class and the mobula6 and the tinyhawk 2 will be raced against each other. in that case the tinyhawk 2 would, based on my testing be the better choice. In either case it's up to the purchaser to decide where to put thier cash.
@snoopyfpv8549
@snoopyfpv8549 4 года назад
@@TweetFPV But that wouldn't be a fair race between the 2, because the tinyhawk has bigger props! Bigger props, more air being pushed. I'm not accounting for the weight differences though.
@TweetFPV
@TweetFPV 4 года назад
Well it's a give and take. Bigger props heavier Quad. We also race with tinywhoop gates and not the micro gates. I honestly think that mutigp needs to update thier class specifications.
@michaelreyes8670
@michaelreyes8670 4 года назад
Can you update the Mobula 6 with Proj. Mockingbird specs. ? I would like to see that?
@oneiltomlinson
@oneiltomlinson 4 года назад
Can this be bound to a Taranis x9d?
@TweetFPV
@TweetFPV 4 года назад
It can be bound to the Pre 2019 x9d
@carrboro_chapelhillfpv2442
@carrboro_chapelhillfpv2442 4 года назад
Heavy quads are faster, it complicated but heavy quads need less angle to achieve faster speeds.
@rcrdps8144
@rcrdps8144 4 года назад
Yep. When I went from whoops to 3", I was amazed at how fast they were. Then I went to a slightly heavier 3", and it was even faster. Got me to thinking,... oh,... right,... When you set the same camera angle on them, the heavier one requires more thrust to stay aloft, and so more thrust is also pointing rearward. As you go up in weight on quads, and use the same camera angle, you find yourself hanging on for dear life! For a professional outdoor racer who is full throttle in the straights, lighter is faster. But for the rest of us, weight and camera angle forces you out of your comfort zone. Today, I lowered my camera angle because I was having a hard time getting in close and tight to objects. But I kinda missed the automatic ripping that the higher camera angle gave.
@jerwallzz
@jerwallzz 4 года назад
I found my OG Tinyhawk and Tinyhawk S both hard to crash-flip, but my V2 flips well, come see it in my video!
@TweetFPV
@TweetFPV 4 года назад
It's a little better but still not good compared to all those other brushless offerings.
@mikeb1596
@mikeb1596 4 года назад
@@TweetFPV its because all the motors spin. On my S I changed in betaflight to only spin 2 motors on crash flip and works every time now
@mikegrimsley9017
@mikegrimsley9017 4 года назад
They won't let me race in the TH2 spec race with my THs, I think they're scared. Only kidding but Project MockingBird is no joke! If beginners want to try it in angle mode only, just use the configuration, rate and the filter settings, don't touch the PIDs . It feels like my kwad is on rails now!
@alexruka
@alexruka 2 года назад
Tonyhawk Pro Skater
@alancarter8396
@alancarter8396 4 года назад
Blimey man you could talk a glass eye to sleep. Some good info in there, but really hard work.
@TweetFPV
@TweetFPV 4 года назад
Haha yea not one of my best videos. I had to keep it low key. Wife and kid were trying to sleep. Either way thanks for the input!
@hakaiyou4532
@hakaiyou4532 4 года назад
Faster? I think Tankhawk 2 fly time is shit in freestyle compared to the mobula6
@diliple
@diliple 4 года назад
3:50 *mobula 6
@TweetFPV
@TweetFPV 4 года назад
HAHA good catch!
@diliple
@diliple 4 года назад
TweetFPV lol
@danman7665
@danman7665 4 года назад
I don’t believe you man. I feel the Mob6 is soo much better than both the THs and 2 on 1s. But saying that I appreciate the video. I’d love a video on how you put the rhcp antenna on the THs. Thanks!
@TweetFPV
@TweetFPV 4 года назад
Yea I hear ya but feelings don't count.
@danman7665
@danman7665 4 года назад
TweetFPV I know. I would want to see more aspects if I were to believe you. Hang on to the quad awhile and retest them in another scenario side by side. On a course on the first flights rather speaks of preference. “It flies closer to what you are used to”. I’d like a scene were you test them and compare racing, freestyle, range, cam in different lighting, video quality, bang for buck etc also did you test the mob6 on bf4.1 on jesc fw?
@TweetFPV
@TweetFPV 4 года назад
@@danman7665 do you have the mobula 6 and the tinyhawk 2? I my testing I was comparing racing, camera quality, build quality. Anyone can zoom around a room and would probably thing the mob6 is better but it lacks the precision control that the th2 has. Between the cameras hands down the th2 is the clear winner in my testing, specs. Both quads don't fly very well out of the box and require tuning. Both were setup with jesc 48khz esc fw and bf 4.1.x. I had probably 50 packs through the mob6 before I did the laps on it and the same goes for the th2. Beleave me (I know you don't) the th2 is the better Quad and will outlast the mob6.
@russwishtart
@russwishtart 4 года назад
@@danman7665 If you don't believe TweetFPV, do the test yourself record your results.
@danieldavelaar
@danieldavelaar 4 года назад
Sure, happymodel was crap in the past, so all of their current stuff must be as well... 🤪 No issues whatsoever here. Anyways, put this mob6 on the mob7 v2 frame and do a fair comparison. It will blow the TH out of the water...
@TweetFPV
@TweetFPV 4 года назад
Well thier current aio smoked on first arming and my replacement board's Vtx has already died. I know this is a sample size of two but it certainly doesn't look good.
@danieldavelaar
@danieldavelaar 4 года назад
TweetFPV hmm ok, then it makes sense. I’ve seen people simply assume it’s shit, based on history. I guess that’s not you 😊 But still, 65mm vs 75mm is a bit unfair 😋
@TweetFPV
@TweetFPV 4 года назад
you are right, It isn't a fair comparison but unfortunately they are being marketed against each other. I have been flying the crap out of both of the quads. I am finding areas where the mob6 is better than the TH2 and vise-versa. In the build quality comparison i still stand behind the TH2 being a clear winner in that area.
@lysis7783
@lysis7783 3 года назад
Mobula 6 is better more stable & power
@stevenkelby2169
@stevenkelby2169 4 года назад
Love your channel and content but not the 40 second intro.
@TweetFPV
@TweetFPV 4 года назад
I was just trying something different. Thanks for the input.
@stevenkelby2169
@stevenkelby2169 4 года назад
@@TweetFPV No worries, subbed and liked 👍
@TweetFPV
@TweetFPV 4 года назад
@@stevenkelby2169 thank you!
@jaimepitta
@jaimepitta 4 года назад
DO NOT BUY IT The Tinyhawk II !!! unlike the first models it cannot be disassembled (unless you want to unsolder 20 cables and reweld them). I broke the RX antenna and had to throw it away. It is made on purpose to buy it back
@TweetFPV
@TweetFPV 4 года назад
Had to throw it away? Emax started soldering the connectors because of performance issues derived from using motor connectors. Yes it does make this quad MUCH more difficult to work on in the end.
@giudittab1
@giudittab1 4 года назад
@@TweetFPV .Great review, I'm sorry to bother you and your channel. Just want to let everybody know what they are buying. I did not have any performance issues with my previous tinyhawk, the tinyhawk S. Those little racing guys need to be fixed quite often, but with the Tiny II will be very easy to damage it while trying to fix it, Anyway i really love how this whoop flyes(very stable and much more enjoyable than the Mobula 6)
@tc3man0
@tc3man0 3 года назад
tiny hawk terrible my mob 6 is best
Далее
EMAX Tinyhawk II & Mobula6: Review and comparison
19:33
Never waste PASTA SAUCE @itsQCP
00:19
Просмотров 4,8 млн
EMAX IS PUSHING HARD RIGHT NOW!!  TINYHAWK 2 review
15:32
Should You Buy The EMAX Tinyhawk II // 1 Week Of Use
9:08
Emax Tinyhawk 2 Review & Flight Test
13:57
Просмотров 78 тыс.
EMAX Tinyhawk 2
26:45
Просмотров 61 тыс.
TBS Tango 2 Grip install
16:02
Просмотров 4,7 тыс.
The Mobula 6 is the whoop you want!
6:07
Просмотров 11 тыс.
BEST BEGINNER DRONE ON THE PLANET 🏆
9:44
Просмотров 45 тыс.