Тёмный

EMCO Star - February 2024 Update. 

The Knackler's Workshop
Подписаться 2,2 тыс.
Просмотров 1,1 тыс.
50% 1

EMCO Star - February 2024 Update. In todays video I show you another accessory I have for the Emco Star and the work stand I have purchased to mount it to.
~~~~~~~~~~~~~~~~~~~
𝐒𝐄𝐑𝐈𝐄𝐒 𝐏𝐋𝐀𝐘𝐋𝐈𝐒𝐓.
✦ Emco Star - General Information - • EMCO Star - General In...
~~~~~~~~~~~~~~~~~~~
𝗖𝗛𝗔𝗡𝗡𝗘𝗟𝗦 𝗢𝗡 𝗧𝗛𝗘 𝗞𝗡𝗔𝗖𝗞𝗟𝗘𝗥’𝗦 𝗪𝗢𝗥𝗦𝗞𝗦𝗛𝗢𝗣 𝗦𝗧𝗜𝗖𝗞𝗘𝗥-𝗕𝗢𝗔𝗥𝗗.
✦ Sticker-Board Playlist - • RU-vid Channel Sticke...
~~~~~~~~~~~~~~~~~~~
𝐔𝐒𝐄𝐅𝐔𝐋 𝐋𝐈𝐍𝐊𝐒.
Here are links for many items used in The Knackler's Workshop.
Books.
✦ Gears and Gear Cutting - amzn.to/3mxZKbN
✦ Milling Operations in the Lathe - amzn.to/3iHyg2f
✦ Vertical Milling in the Home Workshop - amzn.to/3Fjuypg
✦ Zeus Book - amzn.to/3zX8KvO
Camera and Filmmaking Equipment.
✦ GoPro Hero 7 Black - amzn.to/3uwFQBD
✦ GoPro Hero 7 Black Charger - amzn.to/3B2EctS
✦ Olympus PEN F Camera - amzn.to/3B2TNJT
✦ Olympus M.Zuiko 14-42mm Lens - amzn.to/3Fb2DYF
✦ Olympus M.Zuiko Fish Eye Lens - amzn.to/2Y5qQhY
✦ Olympus M.Zuiko 17mm Lens - amzn.to/3D1Zc4H
✦ Olympus M.Zuiko 25mm Lens - amzn.to/3iq9t2J
✦ Olympus M.Zuiko 30mm Lens - amzn.to/3A5wRIN
✦ Olympus M.Zuiko 40-150mm Lens - amzn.to/3iqXhyH
✦ Audacity - www.audacityte...
✦ Inkscape - www.inkscape.org
✦ OpenShot - www.openshot.org
Consumables.
✦ 3-in-1 Oil - amzn.to/3iqJUhQ
✦ Brasso - amzn.to/3kX4Hv3
✦ Dykem Layout Fluid - amzn.to/3l0L0m4
✦ Loctite 603 - amzn.to/3A0pUbK
✦ Union Jack Coffee Mug - amzn.to/3D7Upyu
✦ WD40 - amzn.to/3olrxPi
✦ Workshop Biscuits - amzn.to/3D71lvT
✦ Workshop Coffee - amzn.to/3l2GvHR
Hand Tools.
✦ Machinist Calc Pro 2 Calculator - amzn.to/3iqwbry
✦ Moore Wright Calipers - amzn.to/3l4BIG1
✦ Norton Sharpening Stone - amzn.to/3l1Pd98
✦ Randy Richard Scriber - email: RRINTHESHOP@GMAIL.com
✦ Workshop Knife - amzn.to/2YaQ8M9
✦ Workshop Torch - amzn.to/2WZTOjd
Machine Tools.
✦ Adept No 2 Shaping Machine - www.lathes.co.u...
✦ BCA Jig Borer - www.lathes.co.u...
✦ Deckel SO Single Lip Tool and Cutter Grinder - www.lathes.co.u...
✦ Dore Westbury Milling Machine - www.lathes.co.u...
✦ Emco Unimat SL Lathe - www.lathes.co.u...
✦ IME Watchmakers Lathe - www.lathes.co.u...
✦ Kennedy Hexacut - www.lathes.co.u...
✦ Myford ML7 - Tri Leva Lathe - www.lathes.co.u...
~~~~~~~~~~~~~~~~~~~
𝗦𝗔𝗬 𝗛𝗘𝗟𝗟𝗢.
✦ Instagram - / theknacklersworkshop
✦ RU-vid - / theknacklersworkshop
✦ My other channel - / channel
~~~~~~~~~~~~~~~~~~~
𝐇𝐀𝐒𝐇𝐓𝐀𝐆𝐒.
#Emcostar #TheKnacklersWorkshop #Engineering
PLEASE DON’T FORGET TO SUBSCRIBE ➤➤➤
www.youtube.com...
~~~~~~~~~~~~~~~~~~~
DISCLAIMER: Links in this video description might be affiliate links. If you purchase a product or service using one of these links, I may receive a small commission at no additional cost to you. The revenue I earn from affiliate links helps to keep my channel running and is an easy way to show your support and help me make more free videos like this. Thank you for the support!

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@MrFactotum
@MrFactotum 7 месяцев назад
good to see you back Paul, Time for some shop work now👍👍👍👍👍👍 atb Kev
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Kev, Yes, I have lots planned for in the workshop for this year. Hopefully I should be there more and more over the coming months. Thanks for you support. Take care. Paul,,
@philhermetic
@philhermetic 7 месяцев назад
lovely compact machine! Phil
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hi Phil, I think for a one man band so to speak they give some good functionality. Thanks for watching. Take care. Paul,,
@colindrakes4607
@colindrakes4607 7 месяцев назад
What a handy and versatile machine ! and above all, compact. I do like the way you've put it on its own movable base, with storage for accessories and spares etc, definately a great idea.
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Colin, They are quite good machines... the joiners downstairs said it should be quite good, however not really suited to production work as keep setting up the different configurations does take a little time. I am really happy with the base. I think I will do something similar for my BCA Jig Borer. Thanks for watching. Take care. Paul,,
@jonsworkshop
@jonsworkshop 7 месяцев назад
Looks good all finished off Paul. Had to laugh at your 'seen many summers' comment, you would have seen far fewer living up here lol. 😊🏴󠁧󠁢󠁳󠁣󠁴󠁿
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Jon, I am pleased to have this one ticked off the to do list... On the summers thing it seems a little gentler than I'm an old git - lol. Thanks for watching. Take care. Paul,,
@williamkeily6686
@williamkeily6686 7 месяцев назад
Looking forward to some more. I use mine quite a lot, but have tried the lathe yet as I have a planer/thicknesser set up. At some point I think I have to strip down to the motor ot give it a proper service.
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello William. I have not tried my planer/thicknesser... something for this year for sure... Many thanks for watching. Take care. Paul,,
@RetroSteamTech
@RetroSteamTech 7 месяцев назад
Looking good Paul 👍👍I do find the Star a fascinating machine, seems to have a bit of everything in it! Cheers, Alan.
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Alan, I agree that it is a great design... and all done before computers. Thanks for watching. Take care. Paul,,
@eyuptony
@eyuptony 7 месяцев назад
Up and running soon Paul. All in one place as well. Very handy. Cheers Tony
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Tony, I am pleased to have the machine pretty much done... I just have to learn how to use it now - lol. I hope all is okay with you. Thanks for watching. Take care. Paul,,
@davidberlanny3308
@davidberlanny3308 7 месяцев назад
Hi Paul, thats looking all neat and tidy, well done. Is that the new position for the machine? All the best!!
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello David, I am very pleased that everything is self contained... The machine sits against the wall normally, if i need some space for something large then I move it away from the wall. Thanks for watching. Take care. Paul,,
@GoCreatehms
@GoCreatehms 7 месяцев назад
That's looking great! Interesting cutters!
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Nigel, Many thanks for dropping by... I am really pleased with how the EmcoStar is looking and now finally working. The cutters is interesting, hopefully I cam make one sometime in the future. Take care. Paul,,
@richpost4305
@richpost4305 7 месяцев назад
Hi Paul. Any way to slow down the bandsaw enough to cut metal ?
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Rich, I do have a single phase VFD that might do it... I might have an experiment on the machine in the graveyard to see if I can make it work. Thanks for watching. Take care. Paul,,
@carlwilson1772
@carlwilson1772 7 месяцев назад
That's a brilliant bit of kit. Very compact. I like the stand and storage you've made for it. I think Emco kit looks so pleasingly well engineered. It looks like it is a bit of an art to set it all up. I am sure you will master it and the videos you will make will be useful to others. Nice one mate.
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Carl, I am really pleased with the machine... now time to use it. Hopefully some of the future setup videos will help one or two in the future. Thanks for watching. Take care. Paul,,
@carlwilson1772
@carlwilson1772 7 месяцев назад
@@TheKnacklersWorkshop I reckon they will help others. I bet you are pleased with it. It's good to see you back posting. Great film.
@hilltopmachineworks2131
@hilltopmachineworks2131 7 месяцев назад
Thanks for the update. 👍
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Tom, Thanks... Another machine off the to do list... slowly but surely I'll get there. Thanks for watching and take care. Paul,,
@624Dudley
@624Dudley 7 месяцев назад
Hello Paul - your effort is paying off! 👍
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hello Doric, There are a few more tweaks but I a pretty much there and super pleased with the setup. I think sometime not rushing things leads to a better results. Thanks for watching. Take care. Paul,,
@GardenTractorBoy
@GardenTractorBoy 7 месяцев назад
That is a cool machine and I like the workstation you built
@TheKnacklersWorkshop
@TheKnacklersWorkshop 7 месяцев назад
Hi Joseph, I think it's one of my coolest machines...the stand was a good purchase and its nice to keep all the accessories together... Thanks for watching. Take care. Paul,,
Далее
New Machine Day.
14:36
Просмотров 664
The best craftsmen don't measure like others do
9:35
Просмотров 771 тыс.
Uncle Dean Workshop Tour.
10:39
Просмотров 392
Channel Sticker-Board Update No9.
10:50
Просмотров 1 тыс.
EMCO Star
7:48
Просмотров 11 тыс.
TOOL REBUILD COLLECTION!!
10:00
Просмотров 64 тыс.
This Tool Shows My FUTURE
20:25
Просмотров 386 тыс.
3 Ton Arbor Press Introduction.
13:12
Просмотров 1 тыс.