How to make a boeing 777 from paper? Little_Model_Airport template link: www.little-mod... 1:400 scale by LMA Hope it helps :) Thanks for watching :)) consider subscribing it helps a lot! #boeing777 #papercraft #airplane
thank you very much for helping me make my first paper craft, this tutorial was very helpful. please making more of this content so i can also make my own airport, also, i recommend trying to show the parts more so we can see how to do it. thanks once again! ❤❤😊😊 and also remember me when you get famous!😊
@@greycell_editz I'm grateful for your kindness and for taking the time to reach out. It means more than you know! Thank you soso much for your support and encouragement!
just a thin cardboard like photo paper and about my cebu pacific i cut the tires from the main landing gears itself then i just sticked a thin paper to slide in the tires hope it helps!
Hello! I usually cut the gears itself then sticking a rectangular shape paper to support it and make sure its not tighten otherwise, itll not rotate and thats pretty much all😁
@@Mr.ynmCrafter I can't understand can u pls make a small tutorial I'm also a papercrafter and have a yt channel (with 1.7k subs) and if you do a tutorial it would rly help pls pls
you can start by rolling the engine cut marks. Do it just like the fuselage make a tube out of it and put the engine turbofan inside it and add the cone shaped part. if you want a clearer instructions you can visit www.little-model-airport.com/tips-for-assembling for more instructions ☺️ hope it helps!
@@masotan152 sadly theres no a320 version of the old livery but theres a a319 version check it out drive.google.com/file/d/1Dy6TylITzB1wLSnV7sEczPFeu9h8CsOH/view
@@carrizol4939 you'll just need to cut it. You need to be very careful bcs it's quite fragile cause its small after you cut it you'll glue it into a thin cardboard like a cake box or anything. Then let it dry and stick it onto the wings
Slr! wing infill is that wing shaped marks with code numbers! you can see that if you print one. I got my thick paper on a thin cardboard box u can use any thick paper like illustration board make sure it is not very thick and slightly thin
@@Mr.ynmCrafter I knew I was just confused for what it was for those pieces and now I'm building another one and I did the infills and its a lot better
good job making the emirates 777 But one question: how do you make sure the sheet is printed correctly? When I try to extract the file, it always appears in poor quality.
@@Mr.ynmCrafter its not the printers problem though, the printing preview in browser is the problem. Some of the words and stuff (for liverys) are bad quality unless i zoom in
If you print one you'll notice the cutout parts, copy how i cutt the nose and glue the cutout part roll it and glue but if u still don't get it go to little-model-airport.com/ they have a step by step instructions
Also can u pls show how to do cockpit because i didnt understand the instructions and you just went right into showing how it should look cuz im new to this@@Mr.ynmCrafter
Hey, so i make planes with tape, they look horrible,and idk how to make landing gear, just a question,Could you tell me how to make the landing gear?, and how old are you
Hey there! I suggest not making planes with tape such as clear, mask or any other tape use glue instead it will make it a lot better, and for the landing gears all you have to do is to cut it and stick it to a slightly thick cardboard not too thick. And wait to dry and stick it directly underneath the fuselage and the nose. Hope it helps! And for my age just try to guess😅
I accidentally use band paper I was on urban cuz we don't have any PC and printer so I go in urban to print it idk if they have a4 office there using band paper for printing
If you print one you'll notice the cutout parts, copy how i cut the nose and glue the cutout part roll it and glue them together if u printed the b777 you’ll have two options for the nose if you don’t understand the nose that i cutted just cut the other nose its much easier just glue them together and roll
It took me like 20-30mins to assemble each part and if i show it all this video would be separated into parts and i wanted it to be a short video. Anyways, I am very sorry if you do not understand
Its okay but rn when am typing this am still trying to do it i managed to make the cockpit and the fuselage but the back tail and the cockpit doesn't fit to glue to the plane @@Mr.ynmCrafter
I didn't make it sadly idk the dimensions are different or my printer is bad the thing you put under the fuselage was almost taller and bigger than the fuselage its self anyways though ur tutorial was good i am just bad and my printer messed up@@Mr.ynmCrafter
