EMT Conduit Connectors, Couplings, & Accessories | Beginners Guide 

Awesome Video! Thank you!

Great informative video. I appreciate your time, effort and money you spent to make this vide. Great channel.

That was your best ever video. You are quite the teacher. Your explanations were so sharp and understandable. So much info all in one place

Thank you so much.. this video is so helpful to me.

thanks for sharing

Thanks for this. Helps me plan out how and where I need specific things for my basement

Nice educational video. I used some of the couplers and 90’s before discovering Maker Pipe. They can be useful for situations where maximum strength is not needed and sometimes they fit where MP may be too big.

Rain tight connector, that's what I need. Thanks!

Helpful, Thanks

Good presentation, thanks.

Great video. 101 for the DIY's.

Great video

Very good intro to EMT fittings. I’m an electrician and you taught me a few things. Thanks. It would be nice to have you give technical comparisons of your connectors and the electrical counterpart. That way a builder can be certain they are using the correct hardware for their project.

What type of threads these electrical conduits? Is is NPT or NPSM?

Thank you for this great informational video. Is there an EMT to NMC compression coupling besides the set-screw style?

Nice explanation of all the accessories. Are there any adapters that can connect 3/4 conduit to 3/4 or 1" square tubing?

4:25 how can I create a 90 elbow by myself and expand the start and end?

Great video. What's the advantage of buying the connectors and stuff from Maker Pipe versus a box box store?

I need a reductor from 1/2 " emt to 3/4"

Are there any types of emt to nm connectors that you can install after the workbox is already installed? I have a weird situation where I can't open the wall. It's decorated.

Please show written names on the screen .

Useful, but dude stop with the terrible background music.

EMT is not pipe, it's tubing Have to be carefull with some of the POS garbage that big box stores sell. NEVER purchase or use garbage die cast fittings especially crap made in India. Code does not require bushings for conduit with all of the wires smaller then #6 guage. If you install garbage die cast fittings and move the conduit say more then 15 degrees it often egg shaped &/or cracks. Best practice is to run 3/4" RMT instead of 1/2" from circuit breaker panels to first pull box in case you need to add additional circuits. 99.9% of the time you never need a two hole strap to secure conduit. Sparkies call the pipe hanger straps mineralacs or mini's.