ENCLOSUREZILLA- The best diode enclosure EVER ?? 

Its HUGE! I like it. Well done Sir!

That enclosure is fantastic. I'm really diggin the lift table. That thing is so smooth. Well done! 👍🏻

Absolutely fantastic! 👍

WOW! So smooth on the lift device .. impressive ..

That's a really nice enclosure. It gives me some ideas to build one for my extended D1 20w pro. I've been kicking around setting up a lift bed whether buying a scissor lift or building some sort of lift. The lift that you have here looks like the easiest route and not breaking the bank.

Very, Very nice job!

Really enjoying seeing this progress along 🤗

Your enclosure is very practical and ingenious. It should serve you well and greatly contribute to your workflow. Excellent build!

The more of your videos I watch the more I am empressed.. I wish you would have built the zilla before I built mine. Yours is awesome Thanks

Enclosurezilla! Just when you thought it was safe to go back into the shack!

Nice work! You can cut a piece out of an Heating/A/C filter for those air intake holes. It would prevent direct light and give some dust control.

A suggestion for the air intake hole is to use some type of louver. A dryer vent cover might work too.

Cool enclosure. I always enjoy your videos.... Have you seen the new Roly Automation Lasermatic 10 engraver? It has an acrylic enclosure as part of the machine. I preordered one. Since I am currently living in an apartment and don't have a shop this is ideal. Looking forward to more videos. Cheers, Greg

Another great video. I do hope that you can get the plans (at least for the basic box- demensions and cut list) together and sell them in your Etsy shop.

Inlet at floor level for air for heat savings, other than that it's a decent design for safety.

I’m finishing up on my cabinet. Interesting that we came up with similar ideas. I bought the complete 2 in 1 Xtool with the extensions. I like the horizontal design for easy access. I went the long way and placed doors under the laser frame to allow unlimited length signs with 34” tall letters. On the venting, I have opted to make it a downdraft system with a six inch double squirrel cage exhaust with three speeds. I’ll let you know how that works out. Like your design I have placed two manually operated scissor jacks under the honeycomb. Unfortunately I bought two standard X Tool honeycombs before I saw the extended one piece unit that you have. If you know anyone I would like to sell my two new unused panels and get the one like you have. I see that I’ll have a large solid bar where the two come together. I’m reinforcing the framework with aluminum angle and the two independent jacks should solve the stabilization issue of the large frame. On the glass I’ve built a 24 X 36 solid plate glass top and placed a 24 X 24 filter plexiglass on top that can slide up and down on the clear glass. The lid has two gas shocks that balance the lid open or closed. The unit will have a 32” monitor on an articulating mount. The glass top will be a work surface for a wireless keyboard and mouse that connects to a mini PC mounted to the end cabinet. Like most of my grand plans I’m sure there will be modifications but like you I’m ready to get out of the cabinet business and back to the origins, plan whatever that was. All of this is mounted on a custom heavy four wheel dolly that is detachable and recesses up into the bottom of the cabinet height enclosure. Whew!!! Never dreamed a cabinet could cost a thousand bucks!!! I’ll look into your store for the full length honeycomb and other offerings. Thanks so much for you informational videos and for sharing your knowledge.

Just subbed. Didn't get you to 20K, but it's close. I have an Atomstack X40 Max (48W, 400x850) showing up in a couple days and was planning something similar to your enclosure. I really appreciate your videos on this! (I hadn't considered the downdraft venting, but I love the idea.) Now that you've got several months use, any big lessons learned or recommendations as I'm about to start building mine? Thanks again!

I just upgraded my D1 Pro 20W with the extensions, so I’m researching on how I want to build my enclosure. Great job. Looks awesome. Are you still able to run a camera system with that enclosure and the extended D1 Pro?

Love the enclosure, I have an upgraded Ortur LM2 extended bed and 40w optical power, will you be doing plans?

Show idea, modding a vintage console tv or radio design cabinet into an enclosure.

I really like your enclosure. Are you using 3/4 Plywood and what are your interior dimensions? Great videos. Thank You!!!!

Why did you use cabnet grade plywood for Enclosurezilla.What is theover all dementions I have the same laser as you are using in that enclousre THanks for all you do for your community.

That is a nice looking enclosure! I hope to have mine done soon too. I plan to eventually upload the video of the build. Is there somewhere I can email you a link to it? I would like to see what you think.. Thanks!

Looks like a great enclosure ... are plans available? I get by with ATEZR's collapsible enclosure, but something like Enclosurezilla would sure be nice to have!

What PSI you running air assist? Enclosure looks great Sir! Old school rule would be 2/3 up the length for the lid for the stops. Less torque on the hinges.

For a smaller one, doctor up a case that looks like a proper arcade video game decor just for kicks.

Doing shop air on my enclosure. I want the regulated mostly out of the way ad so I am using a solenoid operated valve . Would you put the valve before or after the regulator?

how high is your camera from the laser bed at its normal height? trying to put one together for my extended B1

Auto dimming window modded from a LCD tv panel like a welding mask for some overengineering.

I'm not understanding the box you have the inline fan connected to. How do you get the smoke on top to exit?

Good video. Do you have the dimensions for the enclosure. I like the lift and have the xTool D1 Pro 40watt. I want to engrave the bottom of my bowls and vases that vary in height.

What are you using for a camera in it, and how is it working. DO you get a proper view of the whole bed with a single camera?

Hi Clack, what size is the drag chain? Cause I ordered one it was too narrow to fit wire and air assist line (1M Drag Chain Cable Carrier R15 7x7mm) 😂

Any chance you've had time to do some cut files, assembly via 360, vetric?

Do you know if the XTool or Ortur rotary are compatible to the Atezr?? Not sure if you’ve tried it - Atezr rotary are sold out and I’m working on a similar enclosure to yours. Maybe an Enclosure..beta to your Mega Enclosurezilla 😂

Is the smoke extraction set up like a downdraft, where does the smoke go?

Got excited by the price of the safety glass you found, but then saw it's only OD3, which is way too low for any real protection. If you have to wear your safety glasses around the laser in the enclosure then spending any money on "safety" acrylic is kind of a waste. I recently watched a video with a guy who does this kind of work for military contract work and he said he wouldn't let anyone near a laser with less than OD5. Yeah the higher OD panels are really expensive, but my eyes are priceless. Maybe just put a panel on the enclosure you can open and close to look with your glasses, or just keep it all closed up and use a camera feed to monitor the burn progress.

What psi are you using for the shop air assist? I can''t measure the psi of the Atezr air assist unit, so not sure. Can't be much.

How are you raising and lowering the bed?

Hey man, you need to lower that camera a little. yer lookin a kinda 5'10ish...lol Just kidding...great job man....looks awesome!

Holy Overkill Batman! 🤷

what size gas struts did you use?

What laser are you using?

how long is the machine with the extension. O.D.?

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

What is the wooden box on right?

Any chance you will sell the plans?

Not seeing a camera in the enclosure, are you not finding them useful anymore?