No video :(

Ender 5 S1 Enclosure - Installation & Testing Using ABS

Подписаться 6 тыс.

Просмотров 30 тыс.

50% 1

Let's see if this enclosure from Creality for the new Ender 5 S1 lives up to the hype and isn't just a lot of hot air. The Ender 5 S1 is ready to print at 300c right out of the box, but with the right enclosure it'll be able to tackle even the toughest 3D printing challenges!
Enclosure Options:
Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5...
Acrylic Enclosure for Ender-5 S1(Amazon) amzn.to/3HlFUMc
Soft Tent Enclosure - amzn.to/3GMXwkj
Other 3D Printer Enclosure - bit.ly/Crealit...
3D Printer:
US store: Coupon Code：12ES5, get 5S1+Sonic pad Combo $120 off， only $479
Creality Ender-5 S1 - bit.ly/Crealit...
Creality Ender-5 S1 - Amazon - amzn.to/3YcHFCg
Nozzles:
Micro Swiss Brass Plated Wear Resistant Nozzle - amzn.to/3CuDnwG
Helpful Printer Upgrades:
PEI Spring Steel Magnetic Plate Double Side Smooth and Textured - amzn.to/3XdPDcV
3D Files:
HexScraper - Printbed scraper - www.printables...
The Torture Toaster - www.printables...
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLit...
PolyLite ASA - bit.ly/PolyLit...
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFle...
PolyLite Silk PLA Blue - bit.ly/PolyLit...
NylonX Filament - bit.ly/MatterH...
PolyTerra Marble PLA - bit.ly/PolyTer...
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterH...
Build Series Silky PLA - bit.ly/BuildSe...
Build Series ABS - bit.ly/MatterH...
Build Series PETG - bit.ly/MatterH...
PRO Series Filament - bit.ly/MatterH...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#creality #ender5 #ender5s1 #3dPrinting #3dScanning #DIY #3DPrinterEnclosure #Ender5S1 #Creality #CrealityEnder5 #Ender5Enclosure #Ender5Installation #Ender5Setup

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@randymay Год назад

Enclosure Options: Acrylic Enclosure for Ender-5 S1 bit.ly/Ender-5-S1-Enclosure Acrylic Enclosure for Ender-5 S1(Amazon) amzn.to/3HlFUMc Soft Tent Enclosure - amzn.to/3GMXwkj Other 3D Printer Enclosure - bit.ly/Creality-3D-Printer-Enclosure 3D Printer: US store: Coupon Code：12ES5, get 5S1+Sonic pad Combo $120 off， only $479 Creality Ender-5 S1 - bit.ly/Creality-Ender-5-S1 Creality Ender-5 S1 - Amazon - amzn.to/3YcHFCg Nozzles: Micro Swiss Brass Plated Wear Resistant Nozzle - amzn.to/3CuDnwG Helpful Printer Upgrades: PEI Spring Steel Magnetic Plate Double Side Smooth and Textured - amzn.to/3XdPDcV 3D Files: HexScraper - Printbed scraper - www.printables.com/model/122894-hexscraper-printbed-scraper The Torture Toaster - www.printables.com/model/60985-the-torture-toaster 3d Printer Filament That I Use: PolyLite ABS - bit.ly/PolyLite-ABS PolyLite ASA - bit.ly/PolyLite-ASA PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95 PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue NylonX Filament - bit.ly/MatterHackersNylonX PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA TECSONAR Tricolor PLA - amzn.to/3H79d5N Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers Build Series ABS - bit.ly/MatterHackersBuildSeriesABS Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament Amazon 3D Printing Filament: PLA - amzn.to/3gsLE9Z PETG - amzn.to/3pXjjvu ABS - amzn.to/3wsTRjS ASA - amzn.to/2RX8dtM Polycarbonate - amzn.to/3cLdr38 Nylon - amzn.to/3iNGeI2 ________________________________________________ Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________

@Hedgewalkers Год назад

I just installed my acrylic enclosure. I was lucky enough to find it for $58.00 on one of the Creality sites. One thing I noticed that helped me with installation a great deal is starting with the door (as suggested in this video) and installing the bottom and one of the top enclosure mounts first on the enclosure sides. This made it MUCH easier to align the panels properly. That being said, Thank you for the video! The instructions were like hieroglyphics to me so it helped me tremendously! 😊

@FatKidBrody Год назад

I like the hard cover. It just looks better.

@randymay Год назад

Yeah it does look a lot better take up a lot less room

@cgwworldministries83 Год назад

Point of contention, there is no bottom, so as the heat rises, it is going to create a wind tunnel as it sucks cool air through the bottom, so realistically 2 more pieces will be needed, a top and a bottom. Creality do zero thought or intentionally make things bad to sell you more later.

@randymay Год назад

You are right, there is no bottom as well. That being said most of the bottom is covered by the control box. I did think that might have been a problem as well but after using it and feeling the air inside the enclosure it just felt like unmovable warm air. I do have a CO2 laser cutter so I can cut my own clear acrylic and try blocking off the bottom. That being said I can even make a top of I really wanted to but I probably won't do that. I had very little faith about this enclosure from the start and I even talked about it in my first video about the ender 5 S1. I believe I said it looked useless due to having no top. After that video I got an email saying that they are sending over the enclosure so that's why I made this video. I wanted to see if it did anything at all. 😁👍

@colinig4411 8 месяцев назад

I did mine for 30€ and a half day work and It's not bad at all. Next is the ABS test... There's also a cover for the S1. Dunno if it's worth it.

@abuttieri 8 месяцев назад

My ender 5 S1 did not have a plastic removable insert like yours in the video at the 1:42 mark. Mine is solid aluminum , I ended up drilling the extrusion and screwing into it. Kinda of challenging but it was either that or try to glue the bottom hinge and magnet catch to the extrusion. I guess they changed the front extrusion in manufacturing.

@stephanbrenner3317 Год назад

I'm using the flexible Creality tent for my Ender 3 S1 Pro. It prints amazingly good ABS parts. The temperature in the inside is app. 25°C higher than in the room. But this is enough for perfect ABS. Much more important that the air temperature is the fact, that there is really no air movement inside.

@randymay Год назад

Very nice, what are you printing using the abs

@stephanbrenner3317 Год назад

@@randymay my plan is to print really large horn speakers for audio applications (appr. 25kg Filament). This is only possible with ABS. And of course some technical parts.

@randymay Год назад

@@stephanbrenner3317 That sounds like a massive print for sure. I'm uploading a video right now about a printer with a 420x420x500 build volume that would come in handy for large prints. 😊

@fraudbuster1456 5 месяцев назад

The acrylic cover is very stylish but this printer can do 300 degrees Celsius so is more of a performance printer than the average 240 degree max models. As a performance printer, you can expect to handle exotic materials such as PC or nylon where a full enclosure is required to limit fume concentration. As such, the flexible hood is the better option for this printer unless you have a ventilated workspace, and even then, the flexible hoods are a fireproof enclosure so if your printer decides that’s the day to try to burn your house down, it will fail. As sexy as the acrylic covers are, on a printer I have to choose function over makeup.

@randymay 5 месяцев назад

This printer was pretty much a stopgap between the older ender 5 and the new K1. Now this printer is very outdated and outperformed by their newer offerings.

@dashkappei4426 5 месяцев назад

@@randymay Do you think it's not worth it? I bought this printer 2 days ago for 339€. Would you say it is a bad buy in March 2024?

@3DPrintSOS Год назад

That looks great…I guess it’s more of a breeze guard? I mean…that toaster speaks for itself though. Especially because the clearances can be worked out with settings. Interesting.

@randymay Год назад

Yeah more or less it's a breeze guard. Unless you have vents over the top of it 😅 But yeah it does work as you can see in the video and that ABS print was done just using the default ABS profile in Cura. So with some tuning I can see it printing even better for sure.

@rockels_journals 8 месяцев назад

Probably mentioned already, but there's also an acrylic top lid available for this printer now.

@randymay 8 месяцев назад

Oh really?

@EsotericArctos 4 месяца назад

When printing with ABS, how do you deal with the fumes with the topless enclosure? I have seen tops for the Ender 5 S1 advertised recently, have you tried any of these? I've looked at the "soft" enclosure and feel it would work better beign fully enclosed and havign that refelctive interior surface, but the Acrylic looks nicer. Maybe the acrylic could benefit from a chamber heater?

@dirkm1964 Год назад

I still ordered the acrylic housing

@randymay Год назад

It does seem to help and it makes the printer look nice. Also check out my new video seeing that I added a sonic pad to this printer and it really did speed up the printer. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--VZtxd5rLB8.html

@Knight.. Месяц назад

There is a hard lid for it.

@randymay Месяц назад

There is a hard lid for it now, not when I made the video 😁👍

@TAGE_FPV Год назад

I would love to know if this helped making things quieter?

@randymay Год назад

It cuts it down on sound a very little but not that much the entire top is still open

@TAGE_FPV Год назад

@@randymay thanks!

@BackyardBroadheads Год назад

@randymay Год назад

😊👍

@pippyr123 9 месяцев назад

Mine just has a metal rail in the bottom, so i can't fit the door on 😢 i tested it its 100% not plastic on mone

@randymay 9 месяцев назад

You can still take it out, you just have to take apart a little more of the printer 😅

@pippyr123 9 месяцев назад

@@randymay id probably destroy it in the process XD

@randymay 9 месяцев назад

Just take your time and it should be simple enough. I no longer have this printer but if I did I would make a short showing you how to take the two supports off and pull that piece out

@joey_mck 8 месяцев назад

Ok here’s the fix! Just dealt with this issue myself and if you search for Ender-5 S1 Door Frame Fixing Block you’ll find the stl for a part that affixes to the side instead of the bottom and works perfectly

@pippyr123 8 месяцев назад

@@joey_mck that worked perfectly! Cheers for the heads up!

@wotter814 Год назад

They need to make a top part too then I'll buy

@randymay Год назад

Understandable for sure

@wotter814 Год назад

@@randymay eventhough very nice enclosure and printer really like the dark blueish acrylic! Good review

@nic8342 Год назад

They make one now :)

@drgonzotcb Год назад

Does this fit the ender 5 pro?

@randymay Год назад

I honestly don't know 😅

@ryderburgner8049 7 месяцев назад

Can you test out the top cover?

@mlmil4405 7 месяцев назад

How about the top cover?? Actually, for 10 times less money and little bit precise cuttong I did for mine with PC Lexan.

@Seanmmvi Год назад

Hey Randy, could I send you something to 3d scan for me with that jewelry scanner you have?

@randymay Год назад

I'm sorry but what are you wanting?

@Seanmmvi Год назад

@@randymay a small model train Snow plow. If happily pay you...

@randymay Год назад

Send me an email. randymaybusiness@gmail.com

@Seanmmvi Год назад

@@randymay will do!

@mrflyman123456789 Год назад

nice review!

@randymay Год назад

Thank you very much 😁

@partyk1d24 Год назад

Wait you are supposed to use a special nozzle for Nylon Carbon Fiber? I used the stock one and outside of needing to do some cleaning before the next print it worked.

@partyk1d24 Год назад

Also my plan is to do the ole' emergency blanket trick for the top

@randymay Год назад

If you are printing with a brass nozzle and using carbon fiber you will make the hole bigger with just a few hours of prints.

@partyk1d24 Год назад

@@randymay Gotcha can I use the ruby one with the normal PLA? Or is this one of those things where I really need to use something like the Hermit Crab?

@randymay Год назад

So if you put a ruby one in you can use any material on it and it won't matter. So unless you want to swap it out for a different size then you don't need to worry about it.

@menacingpankake4124 Год назад

I have a question about the little rubber guard thing that prevents the door from being installed. Does that need to be put back in. Im a little scared if I take it out I'm not going to get it back in lol

@randymay Год назад

Yeah really don't need the black parts at the bottom of the frame

@menacingpankake4124 Год назад

@@randymay awesome, thank you so much for the response. got my printer set up and already have a few successful prints out :D

@No62NoExit Год назад

Hello @randymay thank you for the review. My enclosure just arrived but couldn't fit the Right panel into place due to the metal part. Do you have any suggestions :/

@randymay Год назад

What metal parts are you coming in contact with?

@No62NoExit Год назад

@@randymay There is a metal part at the back of the top panel where the axis motor is located. The metal part on its left side is blocking the glass.

@Derkiboi Год назад

did you have any issues with getting the door flush?

@randymay Год назад

I did, so the mounting blocks are longer on one side so they all have to go in the same way or things will be off. If I remember correctly you can see when you install them if they are flush with the frame or not.

@fellwind Год назад

Did you ever find the ruby nozzle?

@randymay Год назад

Nope, not yet. All I was able to find so far was harden nozzles from Creality.

@trueKorvus Год назад

I think I’ll just try taping cardboard to the sides….

@randymay Год назад

You can also use a cardboard box 😁👍

@H3TONY66 9 месяцев назад

Hi, the print quality is better in PLA?

@randymay 9 месяцев назад

It does well printing PLA but it can still print ABS, ASA and TPU

@arfifteen9344 Год назад

This vs Sovol SV06 plus. Which one is better? Thanks in advance!

@randymay Год назад

It depends on what you are needing to print.

@arfifteen9344 Год назад

@@randymay Thank you for responding. It will be used as a tool. I would like to print useful things for around the house, small bicycle parts, small car parts...etc. I am not interested on making artworks. So far, I l am leaning towards the Sovol.