Enermax Ostrog GT Hardware Installation 

Is the height of 460mm already with the feet...? I'm planning to buy this but I'm not sure if it will fit under my table with a 46.5 cm clearance...

I know this is an old vid but I just got this case for free and am now working on getting it up and running. Are the HDD rails standard or do I need to find them somewhere? This one came with no drives.

Please tell me what brand of Memory Sticks did u install.....I LOVE the Blue/white twinkle....and I will be building a Blue Ostrag ADV setup pretty soon....TKS

What kind of ram was that in there that lit up blue anyone know? Or was it a mod kit put on the ram?

Can you please tell me the kind of power supply to buy I own this same case and I don’t know where the Manuel is

What if you routed the power cable before putting the mobo in? I did that on mine and it works fine

I'm in the middle of a build with this case, and I can't find the usb and power button cables from the top? It should be an 8 pin socket, but I can't find it. Any help?

do I take the small stick thingys out of the little slot for the ports?

hey. can you plee(..)as tell me where the big black cable from the frontpanel goes to? i dont get any place where he could fit on the mainboard. (my motherboard ist an asrock 990fx extreme3)

my micro atx mother board did not cover the cpu power hole. idk what your talking about, saying all motherboards will cover it

What optical drive is that it looks nice with the color scheme

The LED fans come included?

I have this case, I tightened down 1 screw to the motherboard, lifted the board up, slipped the 8 pin cpu power over, plugged it in, then tightened down the motherboard all the way and was still able to pull the excess cable back behind the motherboard. The hole is not useless at all.

Can someone tell me how to remove the little aluminum panel at the front so I can put my optical drive in? Do I break it?

what is the memory card in this video? i cant find any memory which has light.

I stopped listening after the whining about the CPU power hole on top. *You need to install your PSU first*. Pull the power cable through the hole and only then install the motherboard. How hard is that to understand?

I managed to mount the SSD cage in the desired way. No modding needed. I'm also using the CPU power cable hole.

Thank, how about the motherboard?

how dark is the window can you see trough it without cathode lights?

It looks like Avexir memory modules. Corsair has Dominator GT and Crucial has Ballistix modules that light up as well.

what kinda memory you use

@Ry S. - He was talking about the smaller cutout in the backplate, the one on the upper left.

He doesn't mean large hole at the back of CPU fan back plate, it's a little one next to it, in the top left corner of the motherboard tray. See thinkcomputers1 review of this case in 5:30 min

Hi i have a question can i put a z97 mother boar in this case?

Will this case support a 160mm Tall CPU Fan ?

not support Corsair h100i?

what ram is this?

Is that a Micro ATX motherboard?

There is a way to snake the cpu power cable through the hole that's covered by the mobo, you first install the PS, then you snake the cable through the open hole and then lay and secure the mobo over the cable with the connector stretched out of the way past the board. The board will slightly flatten the cable/mesh, but it's not so thick that it will bow the mobo. You're welcome!

Funny how I built a PC with the Enermax Ostrog regular case, and my Gigabyte GA-Z97X-HD3H didn't cover the CPU power cable. Maybe the regular case is smarter designed.

Wat ram?

@epeets With that hole there, you can simply take off the side panel and install the back plate without dismounting everything. -.-

there's not a single cooler I know of that that weird little hole in the corner is gonna help me install any easier or at all for that matter.

The hole provides cooling for sure.

You know, you can still use the hole that the motherboard covers up.

Avexir memory modules!

does this guy not know that the "Big Hole" is where you can change your cpu backplate without having to remove your motherboard?

great/amazing case for the price, i could easily fit 2 r9 290's from gigabyte, even the tri-x would fit with no problem, also the hyper 212 evo fits flawlessly.

1:35 The hole is for easy installation of an after market CPU cooler -.-

Dafuq you need 1000W for?!

why the fuck 1000w...?

It's a Gigabyte GA-Z77X-UD3H by the looks of it.

Same SSD... But he is Dead Fuk.