ENGINEER EXPLAINS BEST METHOD FOR WASHING CARS & TRUCKS - Using Leaf Blower as a Tool! 

Hi everyone, so that it's crystal clear - all towels, microfibers, mitts, and washing apparatus that touch the paint were freshly washed and laundered prior to being used. While I might have shown some items fallen onto the ground, these were never used to wash the truck. Obviously, it's an educational video but I could not show every things that happened in the background. Also, I didn't explain in the video but normally, I actually have a thin, transparent plastic laminate that I use to place my towels and materials, so that they don't touch the dirty ground. Thank you.

Tip: use two buckets one for soap and one for rinse water to get off the debris post application of the soap to the body. Also never I mean never have the wash mitts on the concrete, always make sure you keep it in the bucket or on a clean surface you may get micro scratches that will haze your finish over time until you polish them out from concrete grit. If you wash it with this method and apply a spray on wax every 3 months your paint will look great all the time. Clean mitts and clean towels are the secret.

You got to love those engineers. Never ask one to demonstrate how to open a door. Seriously AP, I appreciate the video.

David, thank you for this excellent detailed and thorough step-by-step video on washing and cleaning a vehicle.

You had me at wash mitt on the floor 😮

David, In my view the first step to a clean car is parking it in the garage as much as possible. That keeps it away from birds doing target practice as well a tree sap, UV rays etc.

Excellent process. Very thorough and systematic with exceptional results. Fantastic job sir! I recommend a uv protectant for all the plastic, non painted exterior parts. 303 makes an exceptional product that many professional detailers use and recommend. Love your channel.

Love using the electric leaf blower. Saves time.

David thank you for the tips on cleaning your truck without scratching the paint. I will be using the the methods you showed in this video presentation this summer on my 2016 Subaru WRX limited.

Excellent washed David. Truck looks spotless! 🤩

I like it and it makes sense. Please keep posting!

Great advise. I've been using my cheap gas power leaf blower for my car wash for more than 20 years now.

What about pinstripes when offroading? A PPF is needed if paint care is important to you. I'm surprised no pressure cleaner was used. I doubt a blower does much. If you have caked mud from dirt roads even, a pressure cleaner is needed instead of a blower.

It's a great way to keep the finish looking awesome

I enjoy your videos! I am skeptical of using the leaf blower at the beginning though. The leaf blower does nothing more than driving at highway speeds does for blowing dirt off. I suppose if the vehicle has been sitting for a while the blower would be good for removing loose debris and dust without washing it into the crevasses as water would. I'll never get to try it out though because my 4Runner doesn't sit for more than a day. My pet peeve is the hood scoop. It seems really difficult to rinse all the soap from the hood scoop for some reason.

David, thoroughly enjoyed the video (all of them I’ve seen)! I am curious about the wheel cleaning brush (brand or where to look), never seen one like that…. Love the leaf blower….I use to help in drying process ( neighbors/passerby have given some strange looks, but when you explain to them, it’s like “ Oh yeah, like the car wash!”) 😂 Thanks for this channel!

I've been doing pretty much the same routine for my vehicles, with the exception of using a chamois cloth to do the final drying, which I rinse and squeeze dry several times during the drying process. I live on a 1/2 mile gravel drive, so I haven't found a tire dressing that doesn't attract dust and dirt. I just clean the wheels with a cloth and the tires with a bristle brush. I do this about twice a year, whether it needs it or not.....

Damn, the last time I did a full wash on my vehicle was 2O years ago, and that’s around 12-14 car/trucks ago. 😁 Nice job 👍

Wow! Tacoma has come a long way. Really nice machine.

Toyo 12 David: I use the leaf blower to dry my truck, didn't think of using it before washing. I would say , I wouldn't lay the microfiber towels on the ground as they will likely pick up grit, may scratch paint. Nice truck, keep up the good work. Thanks Bro!

Thanks for sharing this video, interesting ideas.

David, what about the 2 bucket method, Isn’t it better to rinse the wash mitt after every panel in fresh clean water to remove any dirt or grit?

As an automotive engineer... I encourage you not to place your wash mits on the ground. They will instantly pick up grit off the ground and scratch your paint. Also it’s preferable to use a soap bucket and a rinse bucket for the mit. This keeps the soap bucket much cleaner. Thank you for the videos.

I’ve been using my electric leaf blower to wash and dry my vehicles for years now, it’s a no brainer.

Why not use the water hose to rinse surface dirt away rather than using the blower? I always use the blower to dry my truck off, but not before washing. Maybe I will try your idea one day.

Another great video, David. I appreciate your presentations and expertise so much. I have a new RAV4Limited hybrid on order, influenced a great deal on your videos & those of the Car Care Nut.

Thank you David...great video again.!!!

Excellent demo David.

David. You REALLY need to come for a month or so working in northern BC or Alberta oil fields man! Those clays would give you a real appreciation for dirty trucks.

This is great!! Thanks! Love your videos. Thank you for sharing your knowledge

I love your channel and your energy.

I wonder Who the lucky buyer's are of This engineers pre owened Vehicles, Great Content 👍

Did you get the ceramic coating done by auto details shop? Or dealership?

I use the blower for the inside of the car. I take out everything loose and the mats, open the doors and blowerout real good. Then do the garage. So satisfying.

Going to buy a leaf blower. I have heard from mechanics that tire shine gets into the brakes and causes excess corrosion. What do you think?

Air hose would would maybe be a good idea as well. Especially on the interior! Love you're truck, I just started watching your channel considering I'm in the market for a Toyota Tacoma you've given me a lot of great knowledge! I test drove a brand new 2021 SR5 with the trail package. Army green with black decal emblems along with black wheels and all terrain tires not sure if they're the TRD wheels or not considering it wasn't a TRD sport. It also had a bedliner with a built in cooler and a 110amp outlet. My only let down with the truck was it didn't seem to shift gears very smoothly like it was confused on when to shift at the right time. I'm not sure if it's because it was brand new and not broke in yet or do you know if that's a common thing? Because I also test drove a 2021 TRD sport with 7k miles on it and it shifted fine? I'm really looking to purchase a Tacoma but I'm not fully sure on all the different models with the SR to the SR5 the TRD sport the TRD off road the unlimited I believe and the TRD sport pro! If you feel up to making a video on some of the differences between them that would be very insightful for me atleast. I'm mainly curious if the SR5 is pretty similar to the TRD sport regarding the suspension and internal components when it comes the engine/transmission/ ride height that sort of thing. Not so much the extras regarding the hood scoop and the extra bells and whistles you get with the interior of the truck. Hopefully you understand what I'm trying to explain😂 another words can I get a the SR5 with TRD upgraded wheels and tires and basically have the same truck as the TRD sport or is every model from the base line model 3.5L V6 different as you upgrade to the sport, offroad, etc? Sorry for all of the questions! Or I even wonder if the 2.7L 4 cylinder SR5 is the same as the SR5 3.5L V6 other than having more power do they beef everything else up to handle the bigger engine?

こんにちは、初めまして、私はJoe です．どうぞよろしくお願いします．Tokyo 立川市から来ました。1969 年度です．l have started to watch your program about a few months ago and l love it and very helpful. And I also like Toyota and Lexus cars , so l now driving 2018 Camry XLE and also l still have my 2001 Sequoia Limited and only 70,000 miles on it. I love this old big tank car but millage is 17/20 , l am thinking to fabricate into RV home for fulfilling my dreams. Thank you so much for teaching me the best way to wash cars. I am in SFO area, where are you in USA? When you are in Bay Area, please look me up. ありがとうございます．

I would never put a Mit on the ground then use it to soap my truck! I would throw it away. That goes for microfiber rags too.

Anyone who wants to use the leaf blower tip mentioned here... it probably goes without saying, but make sure the blower is CLEAN as to not blow dirt and rocks on your paint!

Beautiful truck sir… keep the great content rolling for us… stay safe…👍👍👍

WOW! What a nice truck 👍🏻 , if I had that Tacoma I would never get rid of it like NEVER !

Good washing and drying method.

David, start using an extra water bucket of clear water, and after every panel dunk, the cleaning tool in the clear water bucket then dunk using the cleaning solution. This helps maintain minimal amounts of dirt in the washing solution bucket.

thank you for an insightful video, I definitely learned something but then I usually do when watching your videos.

Doesn't rinsing off the car make the leaf blower redundant?

Great topic. Few cover car washing.

Washing perfection!

I have a quick question. I'm excited to be taking delivery this Saturday on a 2023 4Runner Off Road Premium Premium. I live in Los Angeles. Should I spend some extra money to have rust protection put on the chassis? I heard rust was an issue for this vehicle. Thank you for replying.

Everyone in the comments is obsessed with "the two bucket method" but tbh the best method is to use multiple towels so everytime a towel is dirty, it doesn't touch the truck or bucket again. One bucket, one dip, and then throw it in the wash pile and grab another.

Damn, Dave, you don't mess around. Technically proficient, indeed.

I did this since the 90'. Dried my car after a wash.

Interesting, thanks for sharing, 👍

Good info, although prevention is worth a pound of cure, the first/and best method of care for the body paint of a vehicle is to keep it out of the elements as much as possible (limit the exposure) while not in use by storing the vehicle in a garage!

Thank You, Dave.

How a bout compressed air blower in lieu of leaf blower for the initial debris removal? More powerful jet. I don't imagine a leaf blower will remove much debris as they seem to have a fair bond to the surface.

nice info ty .

You can utilize a high volume, high pressure washer without concern of scratching so long as one maintains the appropriate distance given the applied force geometrically decreases with distance

Hi David, when you wash your vehicle would it be best to not place cleaning supplies directly on the road surface? Thanks and love your Chanel and advice.

microfiber wash mitts on the ground? No way Jose. As an engineer we should look at the way microfiber is constructed , essentially little hooks , and if you put it on the ground it will pick up rocks and debris that will not come off in the washing machine....

No offense David, Don't put the micro fiber towel on the ground use another empty bucket. They will pick up grit and will scratch.

How do you clean the undercarriage with all the salt on the roads during winter? Or if by some genius Canada recognizes the idiocy of putting salt on roads you don’t have that problem, how would you recommend Americans to clean it? A drive-through car wash would probably take care of it but has other risks.

David, although your wash area looks very clean I would never place the microfiber mitts directly on the ground.

Foam cannon don't be stingy with soap ,rinse with pressure washer ,then two bucket hand wash . And then leaf blow to dry would make.sense.

Hi David could you share which brand has been used for the graphene ceramic coating. Thanks

And you normally do this once a week? And you have 2 vehicles?

Two bucket method with grit guard is the detailer's choice.

Is there a product that you would recommend for the plastic around the wheels and plastic on the numbers as well as for the headlights? I don’t like the way the plastic looks over time, very cheap

I live in the Northeast and use my leaf blower to clear the snow off the roof of my vehicle. Works better on light, fluffy snow than it does on heavy, wet snow. ☺️

What about abrasion caused by debris sliding off of the surface? I wonder if a Shopvac might be better than a leaf blower? This video has not deterred me from using water pressure to remove surface debris. Full disclosure, I am not an automotive engineer.

Thats why I just go trail blazing adding the most desert pin stripes as humanly possible to the tundra so scratches wont give me anxiety ever.

Butterfly table tennis ball!

I always first used pressure washer, high pressure water blowed many dust-dust ways.

What about spraying the car down first?

Youre a machine !! Love the channel

Who has best battery 🔋 E leaf blower

Good video just wondering how much it costs to do a ceramic coating on a pickup and how long is it supposed to last.

Pro tip: do NOT leaf blow dry your car 6 in the morning on a thursday, you will have police in your yard.

What type of graphene coating was applied and who in the lower mainland completed the coating? Thanks

Do you still use the same wash and wax soap you use on the body to do the roof, windows, and wheels?? Also wondering why you didn't go with the long bed?

After washing with auto body car wash rinse with a little Ballistol oil in a clean water bucket. Then rinse with hose. Ballistol oil has a hundred ways to use its oil. It was invented for the German army. Read it’s history very interesting

Typically I start with the rims and tires, body last. With my classic cars I always have a rinse bucket for my microfiber mit. Then again I own a auto detail company. Good move on the ceramic coating, looks great!

Pick up some good tips thanks

I use a leaf blower, have a sneaking suspicion my neighbors think I am on meth

Thank you very much. You exep

This is good 👍

You’d be a great neighbor

Is there any safe car washes that can be used for us lazy people?

Hi Sir, which brand of tonneau cover did you use, any recommendation? Thank you

Great vid. I sort of cringed a bit seeing those wash mitts on the ground. The roof of my 3rd is showing signs of oxidizing. It sits in the California, sun and apparently I haven't waxed it as often as I should. Seems kind of premature though for a truck with 40k on it. Pretty bummed.

I need that t-shirt

David, I always use a dual bucket system to to rinse my wash mitt before putting it back into the shop bucket. I also use my leaf blower as you do. You might want to try the Ceramic Wash & Coat from Griot's Garage. I love it on my ceramic coated cars.

I don't have a leaf blower, so I used my rake. The rake doesn't work as well!😂

Nice Truck!!!

David good video but I am sorry you had you microfibre cloths on the ground and that’s not a good idea as it will pick up dirt from ground and then wash your car. If you going to that extend use two buckets and keep the cloths in the bucket until you are ready to wash not on the ground.

Weekly wash?! My car is so envy! I wash it only once every 3 months

I enjoy this episode, so creative using a blower. Do you recommend the two bucket system?

David will you be trading in the Tacoma for the Tundra later this year?

The best paint protection is a real roof over the car. No paint protection can safeguard the sun. As far as washing my car/truck I only wash it every 6 months.

Hi, what made you lean to the Tacoma instead of a Trd Pro tundra?

Need rips to wash my 4Runner