Will it work in an AC coupled configuration with my Enphase Microinverter system by itself with my main panel or will I need to set up a transfer switch and a subpanel?
I have a 10KW portable inverter generator. Can I connect it directly to the Gateway's Generator input and limit how much EP Cube draws from my generator (not sure if EP Cube has a setting to limit how much it draws from generator input), or do I use EG4 Chargeverter, and supply DC to the EP Cube to charge its batteries
@@SignatureSolar how do I prevent the EP Cube from drawing more than what my generator can produce ? I am thinking of getting EP Cube with two inverters , 5 batteries per inverter
@@SignatureSolar I could not find it on the California Energy commission website. I only saw inverters made by Canadian solar that were 480V inverters. The battery was not listed either.
Hi again! This (linked below) is on the EP Cube spec sheet. UL1741SB is a supplement to UL1741SA, the cert required for CEC compliance and it also states in the listing that it is CEC compliant. drive.google.com/file/d/1gxiwC93BjQ96NaejKJGMeqbErt_x-pAA/view?usp=sharing
Based on the video title and the comment, it seems like the EP Cube Canadian Solar Energy Storage System is being discussed. While I can't speak specifically to the approval by California, I would recommend considering the Segway Portable PowerStation Cube Series. It offers a massive capacity and fast recharging, making it suitable for outdoor enthusiasts and RV lovers. It's also built tough and equipped with comprehensive protection features. Check it out for your outdoor gear and home backup power needs.
@@lorraine5168 if you can tell me the model you have, I can confirm that or if you'd like to contact me at engagement@signaturesolar.com with your order number I can look up which inverter you purchased in June and get back with you there :)
Thread on DIY solar someone said he fried a few inverters because his Generac generator output had such high THD. I have heard of generators destroying electronics that were not inverter type the output was so noisy.
