EP03: / Stripping Out Interior / 1990 Jeep XJ 4.0 Restoration

Подписаться 40 тыс.

Просмотров 11 тыс.

50% 1

I'm back on the 1990 Jeep XJ 4.0 Restoration and its time to test drive it and see if the transmission is all in order. I'm also going to clean it and pull out off of the interior and assess the corrosion on the floor pans. This episode will decide my next move on the Jeep.
Thanks for watching.
/ @workshoptowilderness
Support me on Patreon - / workshoptowilderness
Check out Jim's Overland Gear at GRABmeGEAR , Discount Code is MIKE10 - www.grabmegear...
Affiliate Link to EcofProducts - uk.ecoflow.com...
My Amazon Affiliate Store - www.amazon.com...
Follow me on Instagram - / workshopwildernessadve...
Follow me on Facebook - / workshop-wilderness-ad...
Contact RJ at - rjsdesertspeedshop@gmail.com
Check out RJs Instagram - / lil_rjs_jeep_crisis
Useful Links
Offroading in Sweden - www.swedishepa....
Road, Trail and Terrain Laws - www.svmc.se/sm...
Driving Private Roads Sweden - www.swedishepa....
Wikiloc Trails - www.wikiloc.co...
Road Map - nvdb2012.trafi...
Jeep Spec:
1999 Jeep Cherokee XJ 2.5TD RHD.
Summer Tire - 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Winter Tire - Cooper Discoverer ST MAXX Por Studded 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Lift Front - RC 4.5" Coils and N2 Shocks (3" Coil Spacer).
Front Shock Bar Pin Eliminator.
Dana 30 High Pinion with Artec Industries Lower Control Arm Mounts with modified upper mount and modified Track Bar mount.
Front RC Control Arm Drop Bracket.
Ruff Stuff Short Arm Single Himes.
RC Extended Sway Bar Links.
Dana 30 Rock Crusher Diff Cover.
Ruff Stuff One Ton OTK Steering.
6" Lift Drop Pitman Arm.
Ruff Stuff Front and Center Frame Stiffeners.
Rear DIY Frame Stiffener and Rear Frame Tie in Kit.
6" x 2" Box Rocker replacement with Tube Slider.
Modified Factory Bumper with Side Sliders.
Rear Tow Hitch Tire Carrier that bolts into Rear Frame Tie in Kit.
Modified upper Shock Crossmember for Rear Shocks
Rear Axle Chrysler 8.25 29 Spline with modified High Clearance Shock Mounts.
Rear Shocks 6.5" Trailmasters.
Rear Leaf Springs 5.5" Rubicon Express
Rear RC Shackle Relocation Bracket.
Stainless Steel Braided Brake Lines front and back.
Warrior 9500lb Winch.
Front Bumper - Ebay Custom Made.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@blocky10 11 месяцев назад

You’re not struggling through this on your own Mike. I’m sure I speak for others when I say we’re here, sitting at home with rubber gloves and masks on, helping you through this torture 😆

@ringonotts 11 месяцев назад

Hilarious! I do wonder if Mike stopped his bushcraft channel because its just not smutty enough. This channel on the other hand - he certainly pulls it off (fnar) 🤣

@chopperchuck 11 месяцев назад

hold on ! you have gloves ? what the hell no one said anything about gloves

@jackwood6023 11 месяцев назад

Did I here Penis pump🤦‍♂️🤷‍♂️😂🤣😂🤣😂

@bilboofbagend443 11 месяцев назад

Hey Mike. You may not recall but a few years back I messaged you about tires and you replied. I was new to all things Jeep Xj ( and vehicle in general hahaha). I want you to know that your reply is what made me stick with my project 98 xj. That jeep now sits regeared, lifted, tuned and has become my daily driver. Recently purchased a 2000 2door xj and it is currently ripped down to the skeleton like your 2nd jeep is. I look forward to following with you in our builds. From the bottom of my heart, all the way over here in IL United States, thank you for giving me your time and replying to my tire question.

@DaimondCraft 11 месяцев назад

Exactly what im doing on my 94 jeep xj 🙂 Rust on the floor in the rear. Good luck. You will probably finish before me.

@VanBeekumGarage 11 месяцев назад

HI MIKE! I'm 14 just bought an xj

@WorkshoptoWilderness 11 месяцев назад

Congratulations that's awesome!

@VanBeekumGarage 11 месяцев назад

@WorkshoptoWilderness so far I've put an 8 inch iro lift kit on it and nee headlights. I've also welded in new floor panels and rhinolinerd the floor. I also put in a new power steering pump and headlights. Next is SYE kit and driveshafts, as well as steering. What steering do you use or is it custom?

@WorkshoptoWilderness 11 месяцев назад

@@VanBeekumGarage Sounds fantastic, nice work 👍 I'm using a ruff Stuff one ton kit but with WJ knuckle swap so it's not y link anymore. It's nice, no play.

@VanBeekumGarage 11 месяцев назад

@@WorkshoptoWildernessok cool. Thanks.

@benmiller3280 10 месяцев назад

Just bought a 90 Cherokee project a few weeks ago. I have a tip for burping the cooling system. Jack up the rear about a foot or so and remove the coolant temp sensor at the rear of the intake manifold. It worked well for me. Its nice to see you tackle the same issues I am running into. Cheers!

@erichimes3062 11 месяцев назад

Five or six years ago, I did this to my 96. It was a great opportunity to replace a couple of small areas of sheet metal on the floor and apply sound deadening

@fabuloussnow 11 месяцев назад

Good thing you keep that old 4.0 and decide to rebuild it. Nice job man

@chipchaffee2416 6 месяцев назад

You have more ambition then most . Your very thorough and take on tasks that most would not even attempt. Thanks for the great series. Look forward to see how this comes out .

@WorkshoptoWilderness 6 месяцев назад

Thanks! Sometimes I feel like a sucker for punishment, but good project always seems to motivates me. Some new parts just arrived for this old XJ, I cant wait to get it back together and working well.

@CFM-56-5B 11 месяцев назад

I had the same transmission issue on my 88 4.0L XJ, it was stuck on 3rd gear and I had to shift manually the speeds with 1-2 and 3 position. I changed the transmission computer unit located on the passenger side and that was working. You should check your Throttle Position Sensor and your transmission fuse before the TCU. Greetings from France 👋

@ronmccall6511 11 месяцев назад

Its great to see so many XJ owners together loving your project. I'm really excited to see how you solve the transmission problem. My 92 XJ is doing the same thing. Thank you for your info filled videos. Wish we could all add pictures of our Cherokees (Ron from Texas)

@luvo8914 10 месяцев назад

Hi Guys, I had the same Problem on my 91 XJ that I just restored. The Problem was the disconnected connection to the transmission control module. It is located in the knee part of the dashboard on the right side under the glovebox. If it is connected, there might be a broken wire or so in this peace of the harness.

@ronmccall6511 10 месяцев назад

I haven’t replaced that part of the dash that the transmission controller is mounted to yet. 😂. I’ll plug that in today and give it a go. I’m sure your correct and I’m sure you saved me a lot of time and money. Thank you so much.

@ronmccall6511 10 месяцев назад

Well I plugged the transmission module in and now it shifts like butter - go figure - thanks so much!@@luvo8914

@loupdescoteaux6541 11 месяцев назад

I'm in the same process right now so really happy about those video!

@saulgilsenan7320 11 месяцев назад

To be honest I am extremely jealous of that roof. I can't believe it's in such good condition! The rest of it aint too bad either. I had to replace the entire floor in mine with new metal, that was a hell of a job I don't wish to repeat. 3 years later I still have a similar size pile of Jeep bits to you, but all in my loft. All the best dude, looking wicked so far!

@WorkshoptoWilderness 11 месяцев назад

I couldn't believe it myself. My diesel had a lot of work to do on the drip rails. It was terrible work. I cant imagine doing a whole roof, that must have been a huge job. Thanks for watching

@steveafanador6441 11 месяцев назад

Brings back nightmares of rust on my Cherokee.

@colbypearce7478 11 месяцев назад

Thanks, again, for taking us along. Really enjoying it.

@fatonyx 11 месяцев назад

Man, I love your humor. Great vids as always. Thanks and keep doing what you are doing. No matter if you are in the woods or garage, you make us laugh.

@WorkshoptoWilderness 11 месяцев назад

Thanks for watching!

@limnostiger9240 3 месяца назад

Please another episode on this restoration. I can’t get enough.

@WorkshoptoWilderness 3 месяца назад

I'm just starting on it again now. Cutting and welding is the next episode!

@BestTeeth 2 месяца назад

Recently bought a Jeep XJ, and it needs a lot of work for the shape it's in, seeing yours be so similar in shape to mine makes me a lot more confident about getting mine to look as tip-top as your diesel one, hope to update this comment in the future once I have it looking top notch. :)

@jackmosher7561 11 месяцев назад

That extended oil filter wrench gadget is AWESOME!!

@robbienorquay4916 11 месяцев назад

Get the trans filter kit that comes with the new solenoids. That fixed my gear shifting problem

@phillims1 11 месяцев назад

Wonderfully informative. Makes me want to strip down my ‘92… Do it once, do it right!

@chrismcca 11 месяцев назад

Not sure if the phase 1 has the transmission to throttle body cable tension adjuster that looks like a little tip. On phase 2 AW4 its a press button reset that makes it retract then kick throttle pedal to floor so it drags the cable out and clicks tensioner tip to new position. I'm also a big fan of adding Lucas Transmission Fix as a way of adjusting that viscosity and protecting the AW4 from heat. Obviously still do the filter and fluid like you say but note sadly not all the fluid comes out in a change (of the full 8 litre capacity - circa 4 litres pan off, circa 2.5 litres by drain plug) unless you want to feed it fluid while running and run the return line into a bucket which could be fun to watch. Really enjoying this, keep it coming.

@shaunmccaw2911 11 месяцев назад

For what you have achieved on your own jeep this will be a breeze for you just some extra ❤

@leanderbuyle4272 11 месяцев назад

Thanks for making these awesome videos Mike! I also bought a '90 XJ as my first project car and watched all of your earlier vids, but I was stoked to see that you bought a Renix 4.0 since it'll be a huge help having you as my guide on this journey 🙏🏻 Keep up the good work

@WorkshoptoWilderness 11 месяцев назад

Glad you enjoy it mate, and find them useful! Hopefully I can get this one looking good and running nice. Congratulations on the new project. What a cool vehicle to begin on as well.

@jeffkatzer 11 месяцев назад

Always a pleasure Mike.

@jasongeorgeson8551 11 месяцев назад

I have a bit of an issue with your videos mate , they are too damn short, absolutely loving this new restoration on a beautiful vehicle. Hopefully when it’s done you could put together a full length doco dedicated just to this jeep. Cheers for posting man I’m actually starting to realise that if I wanted I could buy an old car and do it up, thanks for the inspiration

@thonyonetwo 11 месяцев назад

Nice! I just got an XJ that I am working on. Header was cracked in five places. It's a 4.0. Lambda was going nuts. Now it works after some Tig welding. I think there should be a flex pipe after the first O2 sensor. Next up is changing the push rods and rocker arms. Got a kit with all the parts except the lifters. Fuel pump from Delphi is also being swapped due to I don't trust a pump with 250000kms. Good luck with your Jeep! Best wishes from northern Stockholm.

@Marc-WOA 11 месяцев назад

I'm picking up my 'new' XJ '88 limited next week. It's in pretty great condition but I'm going to definitely give it some extra love and especially take on the interior. Your video couldn't have been timed any better. 🙏🏻

@tylerp9620 11 месяцев назад

I love this resto! No one around here would put so much into a 90 Cherokee. This will be cool to watch!

@paulwalker427 11 месяцев назад

Splendid video chap

@abrahambarkhordar5572 11 месяцев назад

Omg you have a renix now!?! This is going to be so helpful

@WorkshoptoWilderness 11 месяцев назад

Yeah, was a suprise to me. It kind of came out of nowhere. Its worth doing up so it should be a nice project this winter

@williamdomey7584 11 месяцев назад

Thank you for taking us on this adventure with you. I wish I was as talented as you are.

@user-mp6ru8ln4y 2 месяца назад

I just bought the same year cherokee and you can't imagine how much im looking forward to your next videos. Thank you for the guidance!

@banggrod 11 месяцев назад

I'm loving this.

@abrahambarkhordar5572 11 месяцев назад

Headliner time!

@LittleMikeStarCraft 11 месяцев назад

cherokee content is best content

@jelledofferhoff843 11 месяцев назад

Hey Mike, great vid! Check if your kickdown cable is at the. Right tension. I've had a similair issie on my 95 pajero and it had the same transmission. Good luck!

@williammrdeza9445 11 месяцев назад

Hey Mike, the XJ is looking good! Did you tell Meg that now that you have all the extraneous pieces out of the interior, it is done and ready for her to drive? Ha! Looks like a ton of work to do on the body, but I love your attention to detail. I am sure the end result will be something to be proud of. Also, the diesel looks all cleaned up from your latest trip--hope it doesn't mind being set aside for awhile as you focus on the XJ project. Thanks for bringing us along on this latest project. Should be a fun one (at least from the subscriber's point of view!).

@eversleyowl 11 месяцев назад

Great video, as ever, thank you for taking the time to make it. I take my hat off to you, I don't think I would dare take all that trim out, would be petrified about remembering how to refit it and losing fixings. Engine bay looks amazing already, I love the contrast at about 2 minutes with the built XJ leaving the garage and the stock one pulling in, looking tiny in comparison.

@WorkshoptoWilderness 11 месяцев назад

Haha yeah when I watched the modded one roll out and the stock one come in, I thought "what the hell have I done". The engine bay is looking much better 👌 the next episode is a busy one with a grinder! Thanks for watching

@TaralgaBushAdventure 11 месяцев назад

Its interesting that many of the XJ trim panels seem to be metal and screwed on, whereas I had a WJ and lots of that was plastic trim with clips - which mostly broke. Watching with interest Mike!

@GypsyBushcraft1 11 месяцев назад

Awesome video

@mrtivo143 11 месяцев назад

Hey Mike. love the channel, so excited for this restoration. I have tons of renix Cherokee parts I would give to you. I don't know if it's feasible with the cost of shipping, as I'm located in the U.S. but let me know if this is something you would be interested in. Thanks

@Drum4life 11 месяцев назад

I’ve watched a lot of your videos brother. I’m actually getting ready to try and do some of the things you’ve done on my 2001 Jeep Cherokee XJ thanks for all the info.

@stlpro2a386 12 дней назад

Don't overlook the storage volume in those sides panels behind OEM wall trim panels.

@Nic-po7yl 6 месяцев назад

Love your channel ive been inspired by you for years

@curtisb9424 11 месяцев назад

i love this build

@stew4656 11 месяцев назад

I bought a 1990 4 dr. Laredo new back then. I had no idea it would be the last of the RENIX Jeeps. I have a 1989 2 dr. Limited now. Good luck with your project. It looks like a fun one!

@WorkshoptoWilderness 11 месяцев назад

I didn't know this was the last run of the renix. Hopefully it will be a nice jeep once its all restored. Thanks for watching

@EigerSummitOffroad 11 месяцев назад

This is awesome Mike. Can't wait to see more of the resto!

@emtjc8465 10 месяцев назад

I envy you with those floor pans! My 2001 was an old forestry jeep and it was completely rotted out. Needed to do a complete floor pan for the passenger compartment. strangely though my rear was in great shape. Greeting from Florida!

@WorkshoptoWilderness 10 месяцев назад

Its in pretty good shape, I'm suprised to be honest. The rear is a mess though. I think its going to be a lot of work! I guess they all have there suprises, nice that you fixed yours up! Thanks for watching

@johndeleon8529 10 месяцев назад

Thanks for another great video 👍👍. I ditched the carpet out of mine and will bed liner the inside with cuick releas drain plugs for cleaning. Yes when i pulled my carpet out no drivers floor all the way past the the driver seat forward mounts🤣😢 . Lucky frame was rails survived. Both 4 liters had in America would eat the flywheel sensor as well ignition pickup modules, so always had a spare but in states was a parts store on every corner😂. Mine were both manual so no advice on the auto.

@marcdewilde518 9 месяцев назад

Hello Mike, very happy to have found you again! I've always wondered what happened to you and your family and now I know. I also subscribed to this channel even if I don't know the first thing about engines and rust repair but it is all very interesting. I'm watching all your episodes and while I'm shocked by the ambiguous language it is nothing a lot of praying and a few days of rest in a darkened room can't fix. I hope this doesn't harm my mental health in the long run. ATB from Flanders!

@WorkshoptoWilderness 9 месяцев назад

Thanks for tuning in again! I'm still around making content, be it slightly different although I make lots of traveling camping videos on this channel so that maybe more up your street. Haha some praying and a good nights sleep should get the ambiguous language out of your system. Take care and thanks again!

@professionalbodger 11 месяцев назад

love build vids! you clearly know what your doing haha look at your other awesome jeep! I'm sure you will spur on a lot of other people to do their own builds or restoration!! looking forward to the next one!

@ryanslade2591 11 месяцев назад

Whats nice is i have a 4.0 even though its a 2000 i can start getting pointer through this build as the bones are the same

@kenbone4535 9 месяцев назад

I can't believe you are doing this all again.

@jamesa7506 11 месяцев назад

Hopefully Meg really appreciates all this work and stops stabbing holes in your beloved Samantha! 😉👍

@MrRewdtv 11 месяцев назад

When you go to fire that gasser jeep up, cycle the key twice to prime the fuel pump, it will start quicker, and the pump will last longer

@WorkshoptoWilderness 11 месяцев назад

Thanks for the tip, been doing that since you said it 👍

@mkp8176 11 месяцев назад

I couldn’t care less about cars. But it is a great video and a great series (4l)!

@Jack-tx2ve 11 месяцев назад

Mike, I own two 4.0 xj's and a diesel. Check the water pump on your 4.0. Some have plastic impellers and the can crack losing fins and reducing cooling. My Jeep idles much cooler than yours. Also the engine driven fan clutch becomes in effective. Jack

@819ANT 8 месяцев назад

the only issue with doing it up is.. now you need 2 more spare parts jeeps to keep the two nice ones going. and then you will end up rebuilding them ones and then need 4 more spare parts jeeps.. this is how it happens and spreads

@WorkshoptoWilderness 8 месяцев назад

Its like a virus, a very expensive one! 😅

@819ANT 8 месяцев назад

@@WorkshoptoWilderness Landrovers and old tractors are the same.. plus anything ex military or old plant... wifey dreads the next project arriving lol

@hempseedaddict 11 месяцев назад

Still daunting...

@erichimes3062 11 месяцев назад

8th!

@togray619 11 месяцев назад

Mike, the jeep is lots more solid than I originally thought. I ran honeycomb wheels like yours on my 93. I never liked them as they like to hold dirt and they are much harder to clean than other types. The 1990's trannies should be good to go. The color of the fluid will tell you plenty. Maybe just a sensor or something simple to adjust: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OdMGOVZ3QK8.html. Keep up the great work!

@betulaobscura 6 месяцев назад

14:25 🤣

@peterwarner280 11 месяцев назад

But plug ha ha 😂

@stuartb9194 11 месяцев назад

So, a Skandi grind is best for carpet?

@WorkshoptoWilderness 11 месяцев назад

😄 yeah that poor knife. It was one of my favourite scandi blade shapes in my used collection. Lent it to a guy on a course and he snapped about 7mm off the end...

@Ijusthopeitsquick 11 месяцев назад

If it was me I would throw all the carpet and headlining in the trash and go with sound deadening and rubber mats.

@WorkshoptoWilderness 11 месяцев назад

Well that's what I did in my Diesel and I haven't looked back. Its tempting, easier to clean, waterproof and better for sound deadening.

@Ijusthopeitsquick 11 месяцев назад

Agreed. Frankly I can't understand why any vehicle needs carpets. They are magnets for moisture, mud and a million bits of grass. It's not like people take off their boots before climbing into a car...@@WorkshoptoWilderness

@WorkshoptoWilderness 11 месяцев назад

@@Ijusthopeitsquick Yeah I agree, vibration dampening mats, foam and those bucket mats are just so easier to clean. I think people are use to carpeting things although its impossible to clean.

@Ijusthopeitsquick 11 месяцев назад

Come the revolution, all cars will have rubber interiors!@@WorkshoptoWilderness

@davidtwa6265 9 месяцев назад

So beings your used to rhd how weird is left hand drive to you

@WorkshoptoWilderness 9 месяцев назад

Its not strange to be honest. I drove a lhd zj for a couple of years and we have a little nissan that's lhd. I prefer being in the right seat though 😄