EP35: Fiberglass Boat Building in the Philippines|PolyKlear + Resin 

I love your 'can do' spirit. Not only creativity but confidence! Thank you for showing that before the advent of science and technology, methods and systems, humankind just go with the flow, using what is available and letting our hands do the teaching. Just so marvellous!

I've heard good feedback about the Woodglut plans.

composites specialist ako sa supplier nang chemicals ginamit dito. very knowledgeable ako sa composite chemicals resins and fiber reinforcements. pwede ako mag seminar sa mga gusto for a fee

napakaraming process at napaka busisi ng paggawa grabe super na amaze ako dito lods hopefully magkaroon din ako ng isang katulad nyan na bangka sa ngayon in my dreams na lang muna tayo lods God bless lods thanks for sharing

Galing talaga mga pilipino Napaka husay I'm so proud of all filipino God bless....

Awesome fiber glass boat building and design. There's never a perfect boat design and there's always room for improvement and additional revision to make it even a better vessel for safety and security for people on board. I have a couple of suggestions for better performance and noise reduction by the engine and the steering control system. The engine seems to be very loud and the rudder control needs improvement for better maneuvering the boat. Number 1: The engine needs a sound barrier to reduce loudness to prevent hearing ear damage. It needs to be covered with a unique design and at the same time, prevents it from overheating. Number 2: The steering control on the boat needs to have like a round steering wheel for better driving control on the rudder. This can be done even on a smaller boat. The big fancy boats have this steering design which can be implemented and smaller vessels like this one you're building. God bless you with His knowledge, wisdom, and understanding. I'll be moving to the Philippines soon and plan to purchase one like this with the design I mentioned here in the comments.

Great work, loved the video! But, may I suggest wearing at least a dust mask when sanding fiberglass if not a full face respirator to protect your eyes as well? That dust is nasty stuff!

matibay ang fiber glass bangka ..sana magkaroon ako niyan para magamit sa pangingisda...sa mga nakita ko na gawang bngka na fiber glass yan gawa nyo ang palagay ko da best matibay at maganda ..plata porma ng makina ng tubo ng propeller shaft lahat perfect ang pagkakagawa ..nice video from beggining to the end ..nice content boss.

Ayos ito ah?..Mukhang ganito mas magandang ipagawa,kasama ang motor.. Migo salamat ☺ God bless 🙏

Not bad. Mabilis ang takbo ng bangka. Iba tlaga kapag fiberglass ang body, magaan na at matibay pa. Kaya maganda at mabilis ang takbo ng bangka. Good job!

Kuya, where the boat drive shaft exits the stern of the boat what type or kind of a bearing did you install? The video just shows fiberglass going over the shaft at that point. I would like to see how that section is built like you show the rest of the boat building process. Nice 👍 beautiful boat!! You're doing great work I like it good luck Brother! 💪💪💪

Ang galing at ang ganda lods...salamat sa idea...salamat shoopee...mwahh..now i know kng panu..

where can I buy one of these fiber glass banka. What is the price for one same as on the video ? How much with a Honda 16 HP installed ready to go to sea.

Great work I like your determination keep it up

Very nice construction! How much the total expenses?

ok naman sya kaya lang direct na siyang ginawa wala ng molde, matipid pero hindi kasing kintab ng may molde. at dapat ginamitan mo rin ng 600 gsm na wooven mat para mas matibay 👍

Chop strand lang lahat ng fiberglass gamit nyo? Di yan yung tinuturo samin sa fiberglass boat building..

WOOOOW KOSUGA ANA KOL NICE BUILD

Love the creative skills, also the ability to build on a budget. The resin that the man was soaking the cloth with didn’t look like any resin I have used before I was curious to know what they were using?

ok naman sya kaya lang direct na siyang ginawa wala ng molde, matipid pero hindi kasing kintab ng may molde. at dapat ginamitan mo rin ng 600 gsm na wooven mat para mas matibay 👍

Maraming salamat sa po sa inyong panonood at supporta mga kuys hindi ko po kayo ma isa isa ng reply sa mga nag tanong diyan visit my social media acount or email add at ang link na ginagamit namin na product nasa description box po ingat po kayo palagi & god bless you always thanks.

Ayos po yan matibay kpag fiberglass po ginamit sigurado matibay at tatagal ng maraming taon. Keep it up po brad. Support here. Thanks for sharing this video

I now know 2 words in Tagalog: Bangka and Fiberglass 🤣

Just see your video, congratulaciones, I'm a Fisher artesanal un Perú south América, keep going to ahead. Greetings Jimmy

mag kanu po Kay ang presyo yan pag nag pa gawa?

ok na para dili na mahurot ang kahoy sa Pinas. tapos tibay pa kaayo 100 times pa katibay sa kahoy,,,

Wow, no bushing or gasket man lang to keep the water out. Do you think those fiberglass overlay around the holes and shafts can keep the water out? Just wondering, Kuya. Also, try to use engine mounts to minimize engine vibrations.

May additional pa yan pvc-pipe lagyan...styro-foam para unsinkable sa dagat.kaibigan....

ayos yan idol matibay talaga at maganda pag fiberglass boat..

Pila puy magastos ani, Bai- wa pay labot ang Makina. Materiales lang? Salamat sa upload. Keep it coming, and power on.

Galing at napakasipag ni kuya gumawa

Great Idea....

,,pulido ang pagkagawa,, nakabisita na ako sa bahay mo,,idol,,,,hehehe,watching jeddah ksa,, fiberglass ,,maganda yan,,,,

Oky parekoy support lang parekoy

I support you idol. Watching from Jomalig, Quezon. Sa lahat ng nakakabasa nito. Pasyal namn kayo sa munti kong bahay mga idol. Thank you for sharing this video. 🐟🤗❤

Nice work mga kabayan, pero mag safety equipment din kayo. I hope its seaworthy. Protect yourself para makagawa pa kayo ng marami.

Galing naman ni kuya sanay pag palain nawa kayo lahat sa inyong mga ginagawa at kong pang negosyo yan ay akoy nakakaseguradong magugustuhan ng costumer..mula dito sa europe spain.god bless us.

Ayos idol maganda support ko idol

Ang mnga nakikita qng gumagawa Ng mga bagay n pweding I share sa iba ay ginagawa.

Mantaap... Bagus konten nya. 👍👍👍👍👍

Kailangang gumamit ng " Industrial Mask ", dili kado sa Baga lalo kung mag grinding or mag liliha. Be safe always.

Wow!ayos, ang ganda👍

Galing naman mga kabayan..dia akung full support nimo... amping mo diha good job!! ready for fishing 🎣 na mga kabayan.. good luck..

this is a great video. Kudos!

Ang galing kabayan! Dabest, sana magkaron din ako ng ganyang bangka, nag lalaot din po ako kabayan kahoy na bangka gamit ko, at pag lalaot ang content ng vlog ko

Wala bang wind power. Libre lang at hindi masakit sa tenga.

Good job kuyz

Fiberglass boat is better than wood because people are cutting all the PHILIPPINE mahogany in the forest.

Ang galing ni kuya gamit lang ay isang paint brush dikdik lang ng dikdik hangang nabubuo ang banka

Galing nagriresin o nagpafiver din ako kaya lang mga pigurin. Good job kaya lang maraming tumutusok sa katawan yan ganyang trabaho mahirap itulog sa gabi kasi yung maliliit nyang hibla ng fiver sumusoot sa balat...

Ayos Yan boss me natutunan ako sayo.god bless

Ang galing naka fiber glass na, matibay talaga yan.

wow ayos yung bangka masyado malutang good luck sa fishing and adventures boss ilan hp ang makina at gaano kahaba ang bangka salamat

Wow, nindot ug maayo kaayo pagkahimo bai! Cheers and tamsak po

Salamat sA PAg share Brod may idea nA akO Sana makagawa den ako pohon watching from Europe anopog pinamungahan cebu godbless brod

Hindi ito bash po...pero safety po muna. Sana po ay mask tayo para hindi tayo magkasakit sa darating na panahon. Ang gagaling talaga ng mga pinoy. Proud...

Ok boss, sigurado na 11 taon nyan sa serbisyo.. good job

Nice po👍👍👍

Nindutag lutaw niya oi. Nice one. Amping lang brad.

Why not use a roller to Spread the polyesterharts.?

Ayus idol..nice work new subsriber idol..from Argao cebu,,,,

Nice banka,,good work,,love it

Hey. There. So you cut your joints with scissors. Don’t do this. Better overlapping by just tearing it with your hands. With chop strand fiberglass. More strength and smother joints. Try it. Ok. Looking great. Later.

I give it an " A " for lightweight and strength for the resources they have . Quality and safety needs some improvement . Speed test " A + " Lol, looks like they were having a great time out there .

Dapat ung tarik same nlng din ng sa tabang ang hubog para mas lumaro sa alon ung bangka

Ang ganda ng bamgka bai

Ayos pari ah

Sir dto sa masinloc zambales 2 boat na ganyan napotul sa gitna,so d yan effective sa deepsea fishing maporma lng yan pero mahina sa alon..... sorry for comment

Well done👍. How does this compare to a wooden ply of exact dimensions as far as weight is concerned? 40% lighter?

Ang galing kabayan! Dabest, sana magkaron din ako ng ganyang bangka, nag lalaot din po ako kabayan kahoy na bangka gamit ko, at pag lalaot ang content ng vlog ko

Delikado sa katawan ung latex bro kailangan moinom ka tuba inig humn sa gensan kasagaran bangka ngadto fiber namn

Ang ni kuya gumawa ng bangka.. Keep safe po, God bless

That worked out better than I thought it would...

Salamat.... pagka anindot...

Galing nio idol

Mantap bang. Sukses selalu

Mga kuys pasinsya sa mga mute music po kasi na copyright tayo...Salamat sa panonood.

matibay na cya? hindi ba dali ma sisira pag malaki yung alon ng dagat?

Very Informative...Thanks

Kusog mo dagan bai pila ka horsepower ang makina bai

I liked the lamination ... Where you used the tube it was good ... It could be foam there ... It is very good too ... Root lamination ... Congratulations! ... hihihi

Very good video! Salamat😊

idol ang isang lata ng resin makagawa ba isang bangka

Magaan lng ba yang bangka nayan boss...ayus Ang galing Ng pagka gawa👍👍👍

very nice improve no pa yan para pati philipine military oorder sainu hehehe. proud to be pinoy.

good job

Kuya boy, pwidi u ba sabihin f ano ang mga pangalan ng mga ginagamit sa fiberglass. At ang ratio ng pag timpla.

Idol ang Ganda Ng pag kagawa ninyu,, mga NASA Ilan ang gastos ninyu LAHAT Nyan Idol?

More power to you..Peace & GodBless...Shout Out naman dyan kabayan from Los Angeles California Master RC-131

Nice one KuyaBoyneg.

New subscriber here! Ka-nindot ba ani bai!😍

Ang galing nyo sir. Magkano po Ang ganyan kalaki. Gusto ko Sana magpagawa nyan.

Ang galing namn boss...ng pagkakagawa ng bangka... watching from Burias Masbate boss.... padalaw nmn boss ng bahay ko salamat 😊.

SAFETY FIRST boss walang masama mag hanap buhay kailangan nyo rin poh ingatan ang kalusugan nyo para sa inyong pamilya! Fiber matting dikado poh yan toxic lalo n poh yang tinitimpla nyo ma's masama poh ang amoy nyan pag my hardiner! Keep safe boss! Gamit k poh ng face mash, safety goggles at gloves boss!

I recommend maggamit Kayo Ng Aluminum Roller para maalis ung mga na trap na hangin para mas matibay.

Shoutout lods keep it up on blogging proud taga Pinamungajan collab ta soon

Fiberglass boat. Nice.

Kuya boy! New subscriber here! Galing ng boat build! Saan yang builder na yan? And how much did the build cost?

Ang Lupit nyan bai! Pwede pang karera, pa jacket naman gyud. Thanks and god bless!!!

ok n ung body ng bangka kuy, medyo dko lang nagustuhan ung katig nyan,, dapat medyo malapad tsaka nka angat ang ungahan kunti para d tamaan ng tubib masyado..