EPIPHONE LES PAUL - How to Setup Your Electric Guitar - Step by Step

Подписаться 23 тыс.

Просмотров 46 тыс.

50% 1

MusicNomad and Geoff Luttrell team up like no other Epiphone electric guitar setup video, with easy to follow how-to setup instructions using MusicNomad's Precision Gauges and Tools and the KEEP IT SIMPLE, SETUP (KISS)™ method. To learn more about the setup tool sets used in this video and how to setup your own guitar or bass visit MusicNomad's Setup Hub: www.musicnomadcare.com/How-To...
Since 2001, Geoff Luttrell Master Guitar Tech of SF Guitarworks and Sonoma County Guitarworks sfguitarworks.com/ has setup thousands of guitars and also teaches countless guitar and bass players how to setup their own instrument in his setup workshops. He does an incredible job, like no other, of breaking down each setup task explaining in layman’s terms why your guitar will play and sound better by performing each setup task and then leads you through each step, giving helpful tips and tricks along the way. Using MusicNomad’s Precision Gauges and Tools, the setup process becomes so simple to perform as you will see for yourself. Follow along with your own guitar and you will be amazed that yes you can setup your own guitar. Not only is it fun, but a properly setup guitar takes your playing and sound to a whole new level.
Check out MusicNomad's setup hub for lots of how to videos, setup tools and info on the KEEP IT SIMPLE, SETUP (KISS)™. Subscribe to our Channel for more videos coming.
0:00 Introduction
1:00 Pre Setup Steps
4:17 Truss Rod
12:02 Radius of Strings
23:58 Action of Strings
30:50 Nut Height
41:52 Intonation
47:14 Pickup Height

Хобби

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@nerdly44 2 месяца назад

This is by FAR the most comprehensive set up video I have ever seen. Thanks a million.

@clangray Месяц назад

Correction on my prior post. By leaving the "pick capo" in while setting the action on the low E only, you'd be setting the action at the 12th fret to an actual height of .070, not .060. Once you remove the "pick capo" the string returns to its real height which would be higher than what you measured on the gauge before it was released.

@perttutorvinen9180 8 месяцев назад

Needed some memory refresher, since it’s been 25 years last time I had to setup a guitar. By far the best video I could find, and I did find plenty!

@thefalcon666 10 месяцев назад

Best setup videos out there, thanks!

@danthegeetarman 10 месяцев назад

Love your guys’ step by step breakdowns! Best out there. Your setup system paired with the tools you have are the first one to take all the guesswork out of the process. Also very reasonable prices too which is why I go to you guys over stewmac every day 💪

@pharmerdavid1432 2 месяца назад

Excellent neck angle on that Les Paul Custom, which is evident by the low bridge height over the body - most of them aren't that low in my experience. I find that a lower bridge allows for a looser feel and better vibration transfer, but it could be in my head? I like my pickups much lower than recommended, almost flush with the pickup surrounds, but on guitars with higher bridges you have to raise the pickups accordingly. It's better to use your ears than measuring, although after you find the sweet spot it's not a bad idea to measure it for future reference.

@s1mp13m4n 4 месяца назад

This worked perfectly on my Epiphone Les Paul Special 2 budget guitar. Now that used $50 guitar plays very well. Thank you Music Nomad.

@robosulo 10 месяцев назад

Thank you! Would love to see a classical guitar setup guide as well. Your channel has been a great help with all the different types of guitars you go through with these instructional videos. I am hoping that you will make a setup video for a nylon string classical guitar in the near future.

@ThomasMoore.1 8 месяцев назад

Excellent video. Very helpful and enjoyable to watch

@crabbybastardguitars9955 6 месяцев назад

Best ever guitar set-up video. 😀

@tuna22lm 10 месяцев назад

Awesome video very educational.

@Manuel-gh9wm 9 месяцев назад

S-set up job I've ever seen you are mandatory step-by-step set up an international Epiphone Les Paul thank you so much for sharing and teaching s&j tire repairs and how to take care of our guitars great video😅❤

@86cornbread 7 месяцев назад

Thank you. Very informative video

@jimbaaab 4 месяца назад

Very helpful. Thanks!

@PaulHere1953 3 месяца назад

Just what I needed to set up my Epiphone DC Pro! Thanks!

@elijahstraub 4 месяца назад

Thanks for the video. Helped me a lot! I don’t have your product. But I’ll keep it in mind whenever I upgrade. Looks worth it! Thanks again

@GreatYTShark 10 месяцев назад

Love your videos and use a number of Nomad products, I'm happy with them all. Is it possible to do setup video on a Gretch with a floating bridge? Also a classical acoustic to show why you have the dedicated gauge for it. Thanks

@ruschm 10 месяцев назад

This is such a great video, thank you! I realized when using the action gauge, I never pushed down on the 1st fret, which is why I was always off. Also, it would be cool if the correct measurements were bolded or called out more. So 1/16”, make line two on the gauge bolded if that is standard p/u height. Yes, I can read a ruler but it’s hard to see! 😂

@jamesp9141 10 месяцев назад

Love your vids, you should do a setup vid for Les Paul Jr's, both Compensated & Non-Compensated.

@CutzuPisi 4 месяца назад

Thank you for the instructions, very well made. One question, please: if my stopbar (tailpiece) is risen, should I lower it all the way down before checking neck relief ? Or it does not matter ? Thank you in advance.

@honestthoughtswithrob4236 10 месяцев назад

Haha i was literallylooking for this yesterday

@FrankJoseph-vc7qj 5 месяцев назад

Awesome Vid!!! What guitar tuner are you using?

@denro0 7 месяцев назад

when I put my pick between the strings at the first fret, my string radius is wonky at the bridge too.

@onlyfromadistance7326 10 месяцев назад

I have an Epiphone LesPaul FX Plustop Pro. It has a Floyd Rose and i could use some advice on the string hight and anything else you might find helpful. Its my very favorite guitar. Thank you for any advice.

@spoonerluv 10 месяцев назад

They have a floyd rose specific vid if you search through the channel, it covers anything you'd want to know.

@darrelowen9528 10 месяцев назад

Great instructional vid. Unfortunately don't have a pick capo, what thickness is it please?

@b3nnyb3nny 6 месяцев назад

Just use a regular capo or something to hold down the string at the first fret

@SawdustAndShavings Месяц назад

Do you find that the pickups are too boomy with having the low and high e at the same pickup height?

@DavidFeilyMusic 2 месяца назад

Any tips on balancing string action, neck relief, and pickup height when there is a lot of magnetic pull from the pickups where it effects the action/feel?

@MusicNomadCare 2 месяца назад

Great question. If you check out around 2:30 in this video, Geoff shows lowering the pickup to help ensure the magnetism from the pickup doesn't interfere with the strings oscillating. Feel free to reach out to us at tech@musicnomad.com, and we can talk about your specific instrument as well.

@RandomCanEHdian 4 месяца назад

Side note to everyone: 4mm and 5/32 are identical. If you have an imperial wrench set, you're good.

@Bobsuruncle1959 5 месяцев назад

Isnt .020 kinda generous at the 1st fret? My Epiphone is at .008 with no buzzing. I've never set up an electric guitar before and this is extremely helpful & easy to understand. Thank you for this! 👍🎸

@tuna22lm 10 месяцев назад

I saw on a different podcast that if you needed to fill any of the but slots so that you could refile them again that you could use baking soda and add a drop of water to the baking soda let it dry then refile them. My question is does that actually work? It might have been baking powder I do know for sure it was one or the other but does that really actually work? Just curious that's all.

@NebulaStudios1 2 месяца назад

What adjustments are needed for the stop tail piece? What about a guitar with two truss rods. Independent for the bass and treble sides.

@MusicNomadCare 2 месяца назад

Great question. Can you reach out to us at tech@musicnomad.com to help us better understand your specific instrument? Thank you!

@BryanClark-gk6ie 10 месяцев назад

Crowning fret files. Do you sell those?

@letsridehard Месяц назад

Do you measure the pickup height by placing the gage on top of the pickup screw? Or on top of the Pickup plate?

@MusicNomadCare Месяц назад

You measure the pickup height from the top of the pole piece/pickup screw. Thank you.

@clangray Месяц назад

A 25.14 you have your "pick capo" holding down the low E string at the 1st fret, but nothing holding down the high E string. Could you please explain the reasoning behind this "offset" approach? 🤔 If your action at the 1st fret is .020 at the nut saddle on the low E, wouldn't you be dropping the action at the 12th fret by an extra .010 on the low E? So you would be reading .060 on your gauge, but in reality you'd be at .050? 🧐

@shadowghst7704 10 месяцев назад

Hey guys! Question about the bridge radius. What about guitars that have compound radius? Which radius should the bridge follow?

@MusicNomadCare 10 месяцев назад

With your strings off, you will still measure the fretboard radius at the last fret. You will then match your string radius to the fretboard radius. For example if you have a 9.5" to 12" compound radius you will want to use the larger number which is the flattest part of the radius.

@shadowghst7704 10 месяцев назад

@@MusicNomadCare Thanks! Love these videos! I’ve learned so much from them. One suggestion I would make though. Like many other people, I have purchased a handful of Firefly guitars. They are great modding platforms! Geoff has said that even new guitars need some setup. Firefly is no exception to that rule. Please do a video on some of their guitars. They may not be top of the line, but man, do they have quite a following of people. The quality keeps getting better, and I suspect they will soon be a contender. Just a thought…Peace

@twinkletoesdonkey 2 месяца назад

Can someone please explain why you use a pick capo at the first fret for setting action/string height? I honestly don't know anyone that measures strong height this way and all manufacturers give factory measurements based on distance from 12th fret, WITHOUT a capo. Thanks in advance to anyone who can enlighten me.

@MusicNomadCare 2 месяца назад

You use the pick capo to hold the E strings down at the first fret because the first fret is a fixed reference point for making the truss rod adjustment and string height adjustment. The measurements labeled on the gauges are based off the fixed-point reference of the first fret. Holding down the string at the first fret with the Pick Capo allows you to make an accurate adjustment following the KISS methods linear flow. Feel free to reach out to us at tech@musicnomad.com and we can dive further into the topic together.

@jimdoner3443 10 месяцев назад

Is there a way to break in the files, mine aren't so smoth feeling., but made good slots on bone

@high_on_nightmares 4 месяца назад

Definitely needs to be smoth. Always moar smoth

@robertd4646 Месяц назад

Hey I’m new to the guitar world and I just recently purchased this guitar, I was just curious, should the fretboard be oiled or coated with anything when it’s brand new?

@MusicNomadCare Месяц назад

Depending on the conditions your unfinished fretboard has been exposed to, for example, how long the guitar was sitting before sold, you can go ahead and use the F-ONE Oil. It is a good idea to make sure it is properly conditioned. The fretboard will absorb what it needs for hydration, and then you can wipe off any excess.

@robertd4646 Месяц назад

@@MusicNomadCare thanks!

@Graham_Reeves 10 месяцев назад

Shouldn't you retune between each adjustment of the truss rod?

@MusicNomadCare 10 месяцев назад

Make sure the guitar is in tune during the setup process. Adjusting the truss rod will only affect tuning a slight bit. It is always good to check tuning to make sure you are at proper string tension.

@giannibiancocircus Месяц назад

P.U . 1.60 bridge 2.40 neck mm height

@jazzbox1 8 месяцев назад

So pickup measurement is from the pickup cover, not the screw lugs?

@MusicNomadCare 8 месяцев назад

When measuring pickup height you measure using the top of the pole piece.

@ramone167 3 месяца назад

When and why should the tailpiece be adjusted? I was curious as to why it was untouched.

@MusicNomadCare 3 месяца назад

The tailpiece is usually in the proper position from the manufacturer and usually doesn't need to be adjusted. The tailpiece should be lower than the bridge to have a ramp angle so the strings go down towards the tailpiece. You can lower the tailpiece if needed but make sure the strings do not touch the back edge of the bridge when ramping down the tailpiece.

@ramone167 3 месяца назад

That’s why I asked. I recently got a Les Paul direct from Gibson and the tail piece was screwed all the way down with all 6 strings touching the back of the bridge.

@musicmnw1982 9 месяцев назад

Best money you'll ever spend. Them and StewMac. Not always the cheapest but always the best. That fretborad oil lasts for years. I own ten guitars that need to survive harsh northern winters. I use that wrench the most. I hate pulling the knobs off every two days. That little goofy wrench is worth it's weight in gold! You haven't felt pain till you rip the shaft out of a pot.

@josephdlucero1104 6 месяцев назад

Since the LP has only one truss rod it can't be loosened. So how does one get relief?

@MusicNomadCare 5 месяцев назад

Email tech@musicnomad.com to help you with your specific guitar and needs.

@tuna22lm 10 месяцев назад

One thing I have always wondered if a violin and bass violin can make music and they don't have frets then why do guitars need frets in order to play? I would think that if a guitar could be played with out having to use frets that it should be easier to push down the strings to touch the fretboard. I have always wanted to know why guitars need frets.

@thebaneofyourexistence.3377 3 месяца назад

They don’t need frets

@johnwilson4564 2 месяца назад

I thought the screw heads had to face the neck so isn’t that bridge backwards or does it matter

@MusicNomadCare 2 месяца назад

The adjustment screws are usually on the pickup side; if a guitar is oriented with the screws facing the tailpiece and the setup and intonation are done properly, then it is okay that the screws are on the backside.

@johnwilson4564 2 месяца назад

Thanks and how come there’s no 26 file just a 28

@SP-ro8kk 4 месяца назад

Mr Robots father is really awesome!

@erikg2515 8 месяцев назад

I have a 1959 Epiphone Les Paul and the G string won't intobate.

@bkhillert 8 месяцев назад

Pretty common nowadays with G strings being unwounded. You can find videos online about flipping the bridge saddle to get more room.

@b3nnyb3nny 6 месяцев назад

Had to do this with my epi 335. Also the but may need to be filed or changed.

@growapair3880 5 месяцев назад

K I see guys on here using a capo at 3rd fret and measuring gap at first fret for nut height saying it should be .018 to .020 thousands on all strings and even to the first fret.. you have 3 different sizes .020 .018 .016 thousands and your not using a capo who am I suppose to believe now you definitely are a pro guitar technician I see...😂 I would love to know the correct way it's supposed to be slotted and done just like a pro here in this video who's correct I'm lost! 😂 And also how are 3 different heights keeping a perfect even height across the fretboard to the first fret and following the fretboard radius? is it because three strings are not wound and there are? I just don't understand how you're following the fretboard radius with 3 different measurements 😂 and like I said above who's correct lol"

@steelhead197 6 месяцев назад

I love when comp say “we are going to show you how to set up your guitar….as long as you buy $50 worth of our products! Lmao

@btstirewalt 6 месяцев назад

I don't know, man. I didn't buy anything from them, but I followed the steps and got great results. 🤷

@dg1294 5 месяцев назад

You don't have to buy their products bro!...but you will need tools to do the job so, let us in on your secret, what will you use?

@Adrian-yi8fl 5 месяцев назад

Considering it would probably cost you $150 to get this done at a guitar store I don't think that's too bad. Me I spent 15 bucks on their ruler thingy. The other tools I already have