sealboss.com +1 714-662-4445 sealboss.com/c...
SealBoss 4050 SLV Epoxy Resin
Super Low Viscosity High Strength, High Modulus, Epoxy Injection Resin Adhesive
SealBoss ® 4050 Applications
Structural Concrete Crack Injection
Welding Cracked Concrete Segments
Delaminated Slab Repair
Natural Rock, Masonry, Concrete, Wood
Gravity Feed or Pressure Injection of Cracks in Concrete, Masonry, Rock, Wood, etc.
Seal Interior Slabs and Exterior Above-Grade Slabs
SealBoss ® 4050 Advantages
SealBoss ® Product-Pump-Packer System Solution
Super Low Viscosity, Deep Penetration Formula
Convenient Easy Mix Ratio A:B = 2:1 by Volume
Advanced Flow, Solvent Free Formulation
VOC Free
This Product is for Professional Use
Product Description
SealBoss ® 4050 SLV Epoxy Resin is a 100% solids, hi-mod, 2-component, moisture-tolerant, super low viscosity, high strength, multipurpose, epoxy injection resin adhesive.
SealBoss ® 4050 SLV Epoxy Resin meets ASTM C-881/ AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C.
Ask your SealBoss ® technician for details. The product is for professional use.
Installation Guidelines
SealBoss ® 4050 SLV Epoxy Resin is composed of two components. The mixing ratio by volume is 2:1 (A:B).
Concrete Crack Injection:
SealBoss ® 4050 SLV Epoxy Resin is suited for the injection of cracks, voids and fissures in concrete. The very low viscosity of the material provides for superior penetration at low to medium injection pressures. SealBoss ® 4050 SLV Epoxy Resin bonds well under pressure and offers high tensile and compressive strength properties for structural repairs. Injection can be performed in moderate moist environments. Best results and highest strengths are achieved in dry conditions. Do not modify the product if used for injection. For best results, epoxy injection must only be performed with approved two component injection equipment. SealBoss ® provides tested and proven two component injection pumps and accessories.
First prepare the surfaces adjacent to the cracks to expose clean, sound concrete. The injection ports should be spaced from 8 in. (20.3 cm) to 36in. (91.4 cm) apart depending on the crack width and the thickness of the member to be injected. Crack should be sealed at the surface with SealBoss ® 4500 QuickSeal Epoxy Paste NSF or SealBoss ® 4500 F QuickSeal Epoxy Paste.
SealBoss 4040 LV Epoxy Resin
High Strength, High-Modulus, Low-Viscosity, Epoxy Injection/Grouting/Sealing/Binder Adhesive
Epoxy Injection Resin
Epoxy Crack Injection Structural Repairs
SealBoss ® 4040 Applications
Structural Epoxy Crack Injection
Welding Cracked Concrete Segments
Delaminated Slab Repair
Natural Rock, Masonry, Concrete, Wood
Gravity Feed or Pressure Injection of Cracks in Concrete, Masonry, Rock, Wood, etc.
Seal Interior Slabs and Exterior Above-Grade Slabs
SealBoss ® 4040 Advantages
SealBoss ® Product-Pump-Packer System Solution
Proven, High Strength, Low Viscosity Product
Convenient Easy Mix Ratio A:B = 2:1 by Volume
Advanced Solvent Free Formulation
This Product is for Professional Use
Product Description
SealBoss ® 4040 LV Epoxy Resin is a 100% solids, hi-mod, 2-component, moisture-tolerant, low-viscosity, high-strength, multipurpose, epoxy injection resin adhesive designed for high strength repairs, epoxy injection and epoxy crack injection in concrete substrates such as floors, ceilings, walls, foundations and more. The epoxy adhesive can also be used for wood.
SealBoss® 4040 LV Epoxy Resin meets ASTM C-881/ AASHTO M-235, Types I, II, IV, V* Grade 1, Classes B & C (*with exception of gel time)
Ask your SealBoss ® technician for details. The product is for professional use.
Installation Guidelines
SealBoss ® 4040 LV Epoxy Resin is composed of two components. The mixing ratio by volume is 2:1 (A:B).
Concrete Crack Injection:
SealBoss ® 4040 LV Epoxy Resin is suited for the injection of cracks and voids in concrete. The low viscosity of the material provides for good penetration at low to medium injection pressures. SealBoss ® 4040 LV Epoxy Resin bonds well under pressure and offers high tensile and compressive strength properties for structural repairs.
Injection can be performed in moderate moist environments. Best results and highest strengths are achieved in dry conditions. Do not modify the product if used for injection. For best results, epoxy injection must only be performed with approved two component injection equipment. SealBoss ® provides tested and proven two component injection pumps and accessories.
First prepare the surfaces adjacent to the cracks to expose clean, sound concrete. The injection ports should be spaced from 8 in. (20.3 cm) to 36in. (91.4 cm) apart depending on the crack width and the thickness of the member to be injected. Crack should be sealed at the surface with SealBoss ® 4500 QuickSeal Epoxy Paste NSF or SealBoss ® 4500 F QuickSeal Epoxy Paste.
26 окт 2024
