EPSON L3150 / L3250 / L4150 / ET2700 WiFi Setup : How to connect printer to wireless router 

BUY EPSON INK REFILL Amazon - amzn.to/3YTgGvu

Read the manual instructions> failed, watched billion videos on how to configure this damn printer> failed, asked a friend for help>failed, and found this video! It is LIFE SAVER! Thank you so much ❤️

Wow, this was the fastest, easiest, most straightforward way to connect my L3150 to a new router. I did it the way the Epson website said to before and that was a nightmare. So much so that it made me reluctant to change my router and/or password. You are a godsend! Thank you so much!

You're a lifesaver. Epson's instructions had me genuinely thinking my printer was defective!

This is a nightmare to connect to the WiFi

Thank you so much, connected within minutes following your video after wasting a lot of time trying to follow Espon's instructions!

This is the best guide ever! instructions are just so clear, and direct to the point. THANK YOU!!

Thank you so much, now i can print from phone, more helpful than the other tutorial.

This is the most helpful video I have found! Thank you, and well done! I managed to connect my pinter wirelessly to my laptop and my phone! Amazing video! Thank you !

I purchased Epson L3250 wifi printer around 6-7 months ago, at that time the installation guy set my printer to wifi but yesterday I changed my wifi password and then I was unable to print anything through wifi but thanks to your video I'm able to connect the printer to wifi. I even saved your video to Watch Later section, if someday I change wifi password or name again I can easily connect it to wifi.😃😃😃😃😃

What should I do if the 2 lights is blinking?

Guys!!! After long hours of struggle with L3251 I solved it! I had the same issue like people in the comments here, when after trying to connect to wps 2 indicators were flashing together, and nothing happened. so, what have worked for me, what I did: 1) turned off the printer, turned off the router (completely shut power off), waited several minutes, then reset the router. After reset, my router started working on 2.4 GHz only (5GHz became disabled) then I tried again to follow the instructions in the video, and it didn't work, at the WPS stage everything went broken again, so I turned off the printer and turned off the power from the router. 2) Then I reset printer wi-fi settings, like here on the video at 00:10 with turning on printer by holding "i" button 3) I SKIPED WPS PART! and went right to the enabling Wi-fi direct at 02:48 4) I connected to the printer's wifi-direct with iPhone. (you can get the password if you press & hold 'i' button for ~10 seconds, and the printer will print a paper with network data, including the password.) Attention Here!! the password is not "WPS-PIN code", it is the "password" in the section !!! And I assume the password will be there only after you have enabled wi-fi direct. If you hold 'i' button right after resetting wi-fi settings, there will be "None" instead of the actual password!!! 5) after you connected to printer's wi-fi on the phone, open the app Epson iPrint (! *not the Epson Smart Panel* , which is basically *dogshit* and is not working, but an older application Epson iPrint!!). 6) Added the printer in the application. and it worked for me. The printer started to print photos from my phone. I've printed some photos 7) I turned off/on power on router again, because of other reasons And at this point, a miracle happened, somehow, the WPS connection with router has been established! I didn't even press WPS button on the router and I didn't hold wi-fi button on the printer! it just happened by itself! (but I'm not sure, could be because of previous attempts) 7) after two indicators have greenlight, you can go to your PC and try to print something, and windows should find the printer Sorry for a lot of text, but I hope this information will be helpful for someone!

just perfect.. i was so confused earlier because in other videos it was not same.. but this video is amazing.. did exactly same step side by side. happened so accurately. great. thank you so much

Thanks so much been sat here for about 3hours pulling my hair out with the stuff that comes with the printer. Thanks so much honestly x

Indicators would not stop flashing at 2:27, they just switched to flashing at the same time and never stopped. Pressed the WPS button again but nothing. Started from beginning and same thing. Help!

Tried soo many different things and different videos until I saw this one. Good and clear explanation. Gave me my printer back.

Thank you very much for this video. Actually it helps me a lot to set up my printer. I forgot the administrator password and looked for a option. Then I saw this video. I followed the instructions in the video and make my printer back to work. Thank you very much again. 😊 🙏🙏💝

Thank you so much , been trying to set wifi up but no video worked, watched like 100 videos but only yours worked, thanks

Very professional and clear way to explain and give instructions. Thanks !

Please help me my printer at 3:19 didn’t stop flashing but instead, now both of them the bottom and bottom flash at the same time., please help me I have exam in two days I need to print pleaseee

Thank you so much for this turorial! it helps me a lot!😊😊😊 Thank God i found it. Godbless you.😇

my wifi indicators are flashing both at the same time help!!!!!

The easiest way to connect the printer, thank you very much.

Thank you,we spend maybe 3 or 4 hours by conecting this printer to wirless or direct,didn,t worked.With your video i spent4 minutes.Big thanks!

Thank you so much for this video. I've spent a few wasted hours trying to get this set up and going round in circles. Epson instructions are not very good.

after part2, the usb and wifi indicator still lighting, on my computer also showing not connecting..how to solve this😪

omg I had been struggling for such a long time...I even lost my CD so I felt so helpless. it's explained so subtly! thankyou SO MUCH!!!💖

this is the only video tutorial that meet my problem... i just change a new router and didn't know how to disconnect the printer from previous router SSID, and you help me a lot 👍

Hello, i have done everything that you have mentioned in this video to connect my printer to wifi but it didnt worked when i turn wps and after that i press the buttons on my printer and indicators started to flashing but it simply dont want to connect maybe something is with my router or im not pressing the wps button in the right way but can you help me please.

Both lights were blinking at the same time and I could finally solve it! It was the WPS connection, once I pressed the reset button on my router, I followed the steps on this video all over again and it worked perfectly well! Thanks for the video!

YOU ARE AMAZINGLY ARTICULATE AND CLEAR IN YOUR EXPLANATION WITH ALL THOSE GRAPHIC WORKS THANK YOU THANK YOU THANK YOU

What does it mean when after pressing for wifi request both router light and wifi lights are flashing simultaneously?

Why does both of the green light are blinking at the same time?

With me it keep lights two buttons but it doesn't stop

So grateful to you for posting this video! I was about to take the printer back claiming it was faulty.

Life saving!!♥️ Thank you🙏

Thank you again as It helped me again great video

thank you you're GEM Pressing WPS button saved my life

Thanx!! Now I can print from Both my phone and my PC without connecting with the USB cable

Step 1 is the most important. Congrats for telling us

Thank you so much, I was pulling my hair out trying to connect my printer to imac, connected first time using this method.

Exactly what i wanted. Thank you very much. 11/10/2023. I am a subsciber now.

Absolutes gutes Video. Was Besseres habe ich nicht gefunden. Top

what should i do if 2 lights are blinking after the second step? Please help.

Nice video, Sir! But may I ask what does it indicate when both connection lights are on? I've seen that yours are both on too and I also have this on my EPSON L3150 and I am concerned that this may be a problem. Thanks!

YOU.ARE.AN.ABSOLUTE.LEGEND Thank you! - Keep up the good fight you dreamboat.

When I do the 2nd step of connecting the wifi router to printer, initially the alternate indicators flash, then both 8ndicators start flashing together, which is actually error sign. Tried this multiple times and still no result. Can you please help?

I used the video to connect ET-2700 and it works.

This video help me to connect my phone to my printer👍👍

Hi! im trying, but both indicators start flsashing together instead of stop flashing... I´m inside of the router at the same time, and seeing that the device is associated. Any help?

Awesome! You saved me from spending on Epson onsite service....

You have saved my sanity! Nearly lost it and this works perfectly. Should have watch your video first!!!

You are totally awesome! Would've never done it without this video 😉👍

No WPS on my router, what can I do?

A big thank you. followed step by step and long awaited solution i got. thanks a lot

wow!!!!!!!!! you're so smart !!!! very helpful video! Video also available for someone who use DECO and the wifi router doesn't have the WPS button.

This Video help me a lot. I have the problem of connecting the printer to WIFI Router. Finally I knew the way. Thank You so much.

Why are these videos made by people like this, so much easier to use than the official website? Thanks a lot! This helped me once and for all to install the printer correctly.

works like a charm,didn't know my wifi had a wps button on it.

How can you connect L3151 or 3150 to Wifi routers without Wps push button but using Wps PIN?

very helpful. thanks

Fantastic tutorial!

Will it work if I do it using epson CD from my computer? I have been trying to follow the instruction during reset and it is not working. I computer is connected through LAN ( connected directly through the router )

Hi. what if my AP has a password? How can I input the password on the EPSON L3150?

This is the only video that has helped me, thank you so much, blessed be ❤️

Everytime I change my Wi-Fi password, I watch this video and setup Wi-Fi direct on my printer. Thank u so much for detailed video

You just saved a marriage here, thank you very much

Thanks budy , love you❤❤

useful and easy

Best video ever

This video has saved my life.

Correct set up

Hello can i ask what if our wifi router has no wps button?

Perfect. Thank you best video 👍👍

Thanks, your video really help me to reset my WiFi from My Epson Printer, thanks!!

Thank you for the video. Short and easy to understand which is what we want. I have a few questions: 1) For PC, is it possible to activate both wifi router and wifi direct at the same time? Or you can only select 1 option? 2) If you connect your printer using wifi router, do all the home PCs and laptops need to install the online L3250 driver or we can already print/scan documents just by connecting to our home wifi without installing the driver?

Wish it helped me. I get an error every time I try to connect through wifi router. Both wifi indicators keep flashing at the same time. I've tried to connect over 20 times now. Think I'll just have to give up and use usb instead.

Thanks friend finally working ❤❤🎉🎉

Many thanks to you!

Thank you brother. Came here after a lot of wasting time and ink.

Thanks, a bit tricky part for connecting using WPS.

Your are a master of clear explanations!

You are a life saver! Thank you so much!

Both wifi and wifi direct light blinks together what to do now???

After pressing the wps button step, the printer lights blink on top and bottom simultaneously and after a while both start blinking together. What do i do?

You are the best 👍👍🏻👍🏼👍🏽👍🏾👍🏿

It works perfectly. You are my hero & Thank you very much.

Thanks man, it worked👍

Question if i connect the printer to wifi router, no need to select the printer’s wifi when printing? And also the internet will not be disconnected unlike if i choose wifi direct? Tia

Very Helpfull... tq

awesome instructions, so much better than other videos.

How do you put the wifi network and password into the printer again? Is it necessary to install the epson program again or is there an option to add it to any menu? I know it's possible with the wps button but it's disabled on the router :p

Thx a lot

Sorry on my earlier comment regarding the wps button. I just realized I skipped that part of the video. Another question. Will I be able to print through my IOS devices using apple iprint when connected to the wifi router?

Thanks, simple and amazing explanation, helped us fix the printer in five minutes

Thank you so much for this video it’s saved me so much time ✨

U ARE THE BEST BRO

do I have to do the step 1 and 2 if I'm gonna connect using wi-fi Direct instead?

In setting up for wifi router connection, when do we press the wps button in the router to establish the connection. Looks like the video did not mention anything on that wps button

Thank you from Sicily