ERASER WHEEL - Remove Adhesives without Damaging Paint 

I think we should get royalties from the dealership for displaying all this free advertising for them. Maybe a free part Now and then

1. Great video 2. Thanks for putting this up!

When you said screw you man, I don’t want to advertise for you, you spoke to my soul. I feel the same exact way!

You're gonna think I'm crazy, but I was a reset manager for Lowe's for a long time and we used California Scents Citrus air freshener spray to get double sided tape off painted steel beams. The tape would just melt and you clean it right off. Mint👌

Thanks for that. I was really wanting to see it on the tape residue. I have that because the dealer service guys pressure blasted my car and tore the decal. I noticed a week later, so of course it could not have been them... I tried everything to get the adhesive off. Even Mostenbockers failed. Now for an eraser wheel. Follow up to this comment. I had tried everything to get the old adhesive off. Heatgun, cutting wax, Dr Mostenbockers, even a razor blade, nothing shifted it. Bought one of these wheels. Took the adhesive off in 2 minutes. Quick polish and it looks like it was never there.

You don't have to use adhesive remover, if you keep the whizzy wheel in place itll keep eating through. Also corded drill works better more rpms the better up to 4000rpm max. I used this to remove clear bra adhesive on about 1/3 of my Audi A4 hood and there's plenty of where left to use

Buy the 3M eraser wheel. It works faster and leaves no residue. Saves time.

Dude's door is like 50% rust. "I dont want to damage the paint".....LOL..

I have a 1995 jeep cherokee xj, i live in Texas, i hate dealer stickers to, the dealer sticker was removed before I brought the jeep, the Texas sun has faded the white paint and you can still see where the sticker was.

I was in the taxi cab biz for 30 years and damn I wish I'd known about this. Spent a lot of time removing numbers etc off cabs and adhesive.

Use "wax and grease remover" from any auto paint supply store. Put some on a rag and wipe off any glue residue.

Back in the day I would use my thumb and just rub it of witch was very hard on your thumb but we were on commission so faster we painted a car the more you would make

I wish I knew about this sooner. We spent hours chipping away at adhesive with different chemicals and plastic scrapers, eventually I ended up just sanding down the top of my doors and re painting it because I got frustrated. Thanks for the tip, I'm grabbing one of those things asap

Just the video I was looking for...I’m going to pick one up today. Thanks

you damaged de "P" ON THE jeep LOGO....WHAT IS THIS VIDEO FOR? Wasting time..

I have glue on my paint... its expanding foam or spray glue... rock hard... what do you reckon this work? Paint shop tried polisher machine didn't touch it tried all types of safe chemicals.

LMAO I used to work at fullerton

Would this damage black paint? I want to take off the reside that the spoiler left on my trunk.

great review man...appreciate the video...

Oh awesome. Thanks for the video. I’ve just took my door trim off my 2007 avalanche and was trying to figure out a way. This helped a lot 👍

Hey, quick question, do you think the eraser wheel will help clear up visor adhesive that was left over on the window frame?

I debadged my motorcycle today but the adhesive was ridiculous! I tried every chemical I had with no results. I tried lacquer thinner, paint thinner, adhesive remover from three different companies, 89 octane and 91 octane gasoline. Out of all that, the 89 octane worked the best but still too slow. I'll hit the automotive paint store up tomorrow and hopefully find an eraser wheel. Thank You!

Where do I buy the Eraser Wheel???

I think it’s time for you to join the Milwaukee tool team.

Thank you so much for sharing this valuable information. Last weekend we spent 4 hours on a small patch of sun baked tape stuck on the hull of our boat. Just ordered one of these to try next week. Thanks again. Hope you have a wonderful day.

Very good. Just what I was looking for. Removed the decal and the glue from window outside shade, Thank Doug.

I bought actual aircraft grade decal remover and it still wouldn’t work for that double-sided adhesive. That stuff is seriously no joke. I can’t wait for my eraser wheel to get here so I can smash that crap. Excellent video, bro!

WD-40 + plastic spatula is safer and less expensive, however your method is good and faster.

Pro tip: when you buy a car from a dealership discuss the price, warranty, all that stuff, and the very last thing you say before you sign on the dotted line is that they're going to take the dealership decal off the back. At that point in the negotiations, after they've wasted 2 hours they'll gladly do for you it if it means they'll make the sale

I removed the leftover adhesive tape with a rubber tape remover on my white truck after I removed the trim & got left over with yellow stains where the trim was, will the mineral spirits remove those yellow stains?

Does this work on removing flex tape from car paint...???

I’m so grateful for RU-vid videos like these. Just need to one job one time and the fact you made such a concise walkthrough makes me feel much more confident going into the project. Thanks brother

Thanks so much! This is exactly the instruction I was looking for today. My jeep has the stupid air spoilers on the windows and dying to try this.

At first, because the wheel appears somewhat hard, I was thinking paint damage, but seems to have worked well. I wonder if anyone makes a softer one for delicate areas like contours.

Would this work on clear bra? I've tried steam, heat gun, boiling water, plastic razor. It's coming off in 1/4 inch pieces! I'm not even halfway done in 4 hours and there's a lot of gunk left behind where it did come off. Please advise. Thanks

Has anyone tried using the air freshener called pure citrus for removing the glue? Try it. You’ll be SHOCKED how well it works.

I guess it's hit-and-miss cuz I've seen other videos where that rubber eraser has chewed the paint off of the door I guess it depends just like with paint correction if you're dealing with soft paint like foreign cars or more harder clear coat

I like the info, a couple of new variations to me, and, I like the way the video is made. All action, no making me wait while you walk across the shop for whatever. Thanks.

I guess a jersey thing, but really nobody cares, it looks fine as is. Just a thought WORRY ABOUT THE RUST!

Oh my god! I spent HOURS with a heat gun and got nowhere with my two wide stripes. This was a lifesaver!! Thank You for sharing and showing people how to save loads of time and energy on this meticulous task! ❤

You scuffed up the Jeep logo, but fantastic demo, THANK YOU!

Cannot believe how well that works! Got some seriously baked on 29 year old vinyl on my classic car that needs replacing - fingers crossed!

Great! I have a bunch of advertising I need to pull off my work truck from when I owned a business.

Screw you man! I don't feel like advertising for you. It's my car! Hahaha 😂

Great video. Thanks for the helpful tips! I appreciate that you can admit when you’re wrong and teach others.

Oh. He damaged the bottom-right maring of the "P" on the "Jeep" logo, as it chrome-painted-plastic... :\

After using the wheel and mineral spirits, was the clear coat damaged at all?

Is the rubber will safe to use even on glossy paint finish?

If only I had seen this before. Hours spent removing mine. I do have some gunk left so I’ll try the denatured alcohol.

I think that glue is the least of your problems your whole bottom of the door is rusting 💀💀💀

I feel the same way about the dealer logos!!! First thing i take off when i get home lol

I need to get some paint transfer off a car door from a scrape-by. Think this'll do it?

New subscriber!!! Thank you!!!

You can run the wheel in reverse evens out the edge of the wheel

Is the eraser wheel good for big decals suck as racing stripes?

I bought the 3M eraser wheel last night $56

I just did this to my 98 XJ with a rubber wheel I got from my brother who was an auto body guy for years. What a difference it is having that plastic crap off the doors lol

I'm going to vouch that this absolutely works. I spent hours trying to get some weird film that was on my toyota echo off. I used a cordless heat gun, goo off, and plastic scrapers. It would have taken hours. The eraser wheel took less than 10 minutes. Wow, this is a really neat trick!

Great advice, how would you deal with a burnt out vinyl wrap on a hood? You know is a huge working area; my vinyl wrap is completely messed up.

How to get rid of the rubber eraser residue after, its driving me bananas

WARNING: Do not attempt on a black car.

Hi how about duck tape that’s been on the top of the sunroof?

I have the exact same black and decker drill lol

Please tell me you are going to attack the rust!!

I see you get you safety boots from Pakistan.

I picked up a 3m adhesive eraser from my local parts store. Gonna give it a try tomorrow. Thanks for the video. I feel confident now.

I have like glue from where my skirts were will This get that off

Cool thanks man

Just as a tip, when you buy a vehicle from a dealer have them remove their logo before you buy it. Great video!

At 3:38 you scratch your P bro from the logo, nooooo

Most informative thanks

See at 5:21 that's where ur supposed to use the wheel..

Lighter fluid. Done.

What type of alcohol now?

If you use the wheel slower and heat the stuff up, it won't shed so much. Wheel will still look like new as well!

Love the info man keep up the good work. I’ve been binge watching yalls channel since I found it. New sub here. A lot of helpful stuff for my wj. Where can I get one of the D&E decals?

Your jambang is very cool dude.

XJ 🤜

this is me typing in the squat box

Go Bears

Can you use on any electric drill or does it have to be a high speed drill. I’ve seen for best results around 3000-4000 rpm

Does it scratch. The paint

Just tried some cheap disc off Amazon and what a mess. at 600 RPM just smeared letters around, at 2200 RPM smoke and huge layer of the wheel on top of the mess. I watched some video with cheap flat, cheap jagged like this, and 3m, this style generated more heat for some reason, and took way longer to remove a decal, the 3m was the best about 1 minute, the cheap look-alike 4 minutes and this style 11 minutes.. what solvent is safe to use to remove the crud left behind, did not wish to harm finish, put a 2015 rust free box onto my 1977 squarebody and like the shiny black paint...

You knicked the P on your JEEP logo :(

🚩Have so many stiicky residue. Even glue globs on inside door panel( driving me Crazy) fabric grey Any thoughts? Also "Mineral Spirits" u said it Left fading behind? How did you get it to be clear/ clean,? Thanks. Love that part,,wish had power drill!

If you have anything more than a small amount of work to do, get a 3M pinstripe removal wheel and the company’s automotive adhesive remover. The wheel is crazy expensive - more than $40 at this writing - but after hours of use with it and two cheaper knockoffs, the 3M wins. I had to remove a 15-year-old 3M Clear Bra from the hood of a Lexus, and the 3M wheel was the only one to do so without piles of dusty residue. And despite the enormous amount of material that had to be removed, the 3M was the only wheel that did no damage to the clear coat whatsoever. The other wheels left slight marring that had to be removed with compound and polish. Also, in the video the drill bounces like crazy. Holding it another way, if you can, makes for a smoother action. Hold the drill in your left hand, palm facing and parallel to the work surface. Steady the top of the drill with your left hand and work from right to left. I had no trouble using a Makita battery-powered drill and two 5 amp-hour batteries. Charge per battery lasted 40 minutes or more, and each battery was recharged by the time I needed it. While rubbing alcohol was fairly adequate for removal of residual adhesive, the 3M product was vastly better.

How do you think it would work on decals on glass?

"Screw you man you know. I don't feel like advertising for you. It's my car!" PERFECTLY said!

Don’t forget to use a heat gun when taking off the trim pieces. Heating it up makes it come off easier and leaves less residue to begin with. Just use a plastic putty knife and ease it off slowly. The eraser wheels are really nice to have in the tool collection though.

Nice content. Gloves Bro!

Plastic razor blades!

When I use the wheel, I make sure I highly lubricate the surface first with some dish soap and water in a spray bottle

will eraser wheel remove glue?

Easily and harmlessly removed with lighter fluid.

Thank you for this video

All great advice- thanks, man!

Was that painter on pinstripes

Always wondered if those things worked.. I am surprised to took off that pin stripe so easily

So it won’t mess up the paint or swirl marks?

This wheel works amazing! I ran it at a low RPM with my drill and YES the Cherokee looks better with out that plastic junk! I used the name brand Wonder Wheel though but same concept