Escape 2013: Programming and calibrating used ABS module with Forscan (U2300,C0061 & C0062) 

Solid work bro

Great info boss

Thank you for the info. I have 2009 F150 Platinum and I grabbed an ABS unit from a salvage yard. despite the coding being correct I'm still a configuration code. any thoughts or assistance would be appreciated. Thank you for the content.

Hi, thanks for your video! I tried doing this on my ford mondeo 2014 but when I put in the used abs unit it could not find as built information. I tried abs reset and initialize/relearn abs but still wouldnt turn the car on. Also tried saving my abs data from my original one and loading it onto the used one but the data seems to be the same. I'm not sure what to do, if you could point me in the right direction I would really appreciate it. Thanks

Thanks for your video. I replaced the electronic module of the ABS on a 2011 Ford Explorer. The old module was not readable and I was not able to retrieve old data. I was able to program/add the as built data using Forscan. I now have error code U2100:54 - Initial configuration not complete-missing calibration. I do not have a tab for ABS Module Initialization/relearn from central configuration to initialize the ABS module. Any suggestions.

Do you know if this is a similar process to be done if changing an abs pump on Mondeo 2015 would it just be a case of performing the service functions for the sensors please tia The customers going to be using his old module with a brand new pump

do you think if replace PCM and ABS module from one working to another working 2006 ford escape hybrid this is going to work

Thank you SO MUCH for this video! Can i ask a dumb question...in forscan it will get the original abs module data directly from ford? I dont need to plug my old unit back into the truck to get the abs mod info?

when trying to calibrate the longitudinal acceleration sensor , and going to write it all i get is module configuration not getting configuration option in the write section

Hello, is it also possible to program the current abs module in that way? Since the new abs sensor has been replaced, but reports fault code ABS U2300:51-2B. The code in question cannot be removed with any reset program, not even Forscan.

I have problem on ford escape hybrid 2010. Obd written abs brake booster solenoid but one moment its work another time not work. Can i do like this ?

I am trying to retrieve AsBuilt for ABS and PS modules for 2014 Ford Fusion SE 2.0, and when it tries to download, it fails, "server not available". Is this only for paid customers? Or are servers down now?

Comes up with an error when trying to add a spare key . [20:28:59.352] Module returns incorrect outcode. It means the module is out of normal state. [20:28:59.361] Recommendations: - Make sure there are no wire/connection problems between modules - Try to reset module using service function "Module Reset" (if available), or by disconnecting the battery for 20-30 minutes - Try timed access (if available)

Hi great video. Would this be possible on a 2015 fiesta. I want to replace the faulty abs unit for a second hand one off eBay with the same part number. I have forscan on my laptop already.

Which VCI did you use?

I've fitted New/ Second hand module. Followed your instructions :abs module initialization/relearn from Central configuration but my service procedure is not supported. Any clue why not??

Friend and what type of interface do you use?

be warned if the imobiliser runs through the abs module you can configure the module but the vehicle will not start unless you match the module to the pats system