Essential For All Users | RME ADI-2 Remote 2.0

Подписаться 3 тыс.

Просмотров 1,4 тыс.

50% 1

My (not so short) overview of the ADI-2 Remote 2.0.
Get the remote here: rme-audio.de/downloads.html
00:00 - Intro
00:21 - Supported Hardware
00:48 - Overview
02:23 - Hardware Mirrors Software and Vice Versa
03:25 - Line Input
04:07 - RIAA Mode
04:39 - Advanced Settings
05:07 - M/S Processing
05:26 - Line Out
08:16 - Dual EQ
09:04 - Crossfeed
09:41 - Device Page
09:52 - Device Mode
10:54 - Remap Keys
11:25 - Setups
11:39 - EQ Presets Page
12:22 - Re-Load Presets
13:19 - State Overview Page
14:22 - Conclusion
14:40 - It’s FREE
14:51 - Outro
Phable is a german-based singer, vocalist, musician, and DJ with deep roots in House, Techno, Deep House, Dub and Tech House. In the last years, he released on labels such as #Armada, #Ostfunk, #LightMyFire, #WonneMusik, #Pure*, #AudioSafari and recently on #PlasticCity. Sometimes his tracks are melodically sensual, sometimes pumping groovy, his style unique.
GET IN TOUCH:
BEATPORT:
► www.beatport.com/artist/phabl...
INSTAGRAM:
► / phablemusic
WEBSITE:
► www.phablemusic.com/

Видеоклипы

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 7

@phable 3 месяца назад

Have you tried the ADI-2 Remote already?

@MrMukundas 3 месяца назад

thank you for your beautiful explanation! one question: - I'm going to connect ADI2/4 Pro SE to UCX 2 via digital I/O. (48 khz) I want to use not only DA but AD of ADI-2/4 as well. is it available through AES/SPDIF/ADAT? Are these 2 inputs of adi2/4 available digitally in UCX2 TotalMix? - is it possible (in this setup UCX2+ADI2/4) to use all of the I/O of ADI 2/4 in total mix of UCX2? 1 pair of monitors connected to ADI 2/4 (with eq correction applied on ADI 2/4) 1 or 2 pairs of headphones connected to ADI 2/4 with separate mixes in total mix and eq applied on ADI2/4 side (or only one separate headphone out is available?) 2 mic preamps connected to ADI 2/4 inputs (are these available in total mix as regular other inputs on ucx2?) ALL AT THE SAME time via any digital I/O connection to UCX2. or there are some limitations for this use case?

@Bob-exponentiel 29 дней назад

Hi , very nice! Does it allow shortcuts or midi mapping for volume control ?

@phable 8 дней назад

It's on the request list :)

@unc1589 Месяц назад

A novice question if I may. Adjusting EQ on phones and main out. I never understood. Is that just for monitoring output? If I created and mixed a song complete with EQ curves and settings, am I telling the ADI 2 pro fsr to lie to me by changing its EQs? Meaning, if I push the highs on the RME to a ridiculous level, it doesn’t affect my personal mix. So it’s all for manipulating the listening environment? And hearing an untrue mix of what’s really going on? So it’s an audiophile thing? Thanks

@kdelavirgen 3 месяца назад

Can you monitor the line inputs in real time via the headphone outputs and control routing through the remote as well? I’m debating switching to the ADI-2 Pro FS from a Lynx Hilo to save on rack space as long as the conversion AD and clocking is on par. I go AES in to my monitors, so not too many worries about the DA in that regard. The reason I ask is because I do tracking and mixing and the Hilo workflow allows me to do both albeit Lynx’s remote app is a bit lacking, especially in comparison to this new RME one.

@phable 3 месяца назад

Yes :)