Essential Victorinox Venture "Belt Carry Loop Tricks" / New Venture knifes and improved sheaths!! 

Thanks you so much for this wonderful compliment!

Is there more venture pro available in the near future in Belgium Flanders?

@@Elektroslag I'm guessing shoes with laces are a bit complicated for you as well.

@@Something2ShowYou touche!!

Not a legitimate excuse for such an old and over priced company

Super, thanks a lot for this wonderful feedback!

Thanks for this important feedback!

Thanks a lot Dave!

Your comment makes me happy! Thank you!

Thanks a lot . I wish you the same!

Thanks a lot for your positive comment!

Thank you very much!!

Thanks a lot for your weekly support!!!

Thanks a lot for your true words!

Danke Dank Danke!! Dein super nettes Feedback bedeutet mir viel!

Thank you very much for this wonderful feedback!

Thanks a lot for this positive feedback!

Thant make me happy.. thank you!

Thank you very much!!!!

Thank you very much!

Vielen Dank!!

Haaa ha haa, thank you!

Thanks a lot my friend!

Thank you very much!

Merci beaucoup!

Thanks for watching!

Thanks a lot for this compliment!

Thanks a lot!!

Danke für diese tolle Geschichte!! 😅

Ich danke dir!

Sehr gerne Dennis!

😅😅 Thank you!

I was going to say the same exact thing. It's always interesting to see what Felix builds from so little.

Dein Kommentar freut mich riesig!!!!! Herzlichen Dank für die super netten Worte!

@@FelixImmler das ist doch so. Ich habe diese negativen videos auch gesehen. Und denke dann oft- diese Menschen sind nur neidisch. bleib einfach dabei und sei weiterhin so positiv- danke dafür!

Thank you so much!

Thank you very much!

Thank you very much!

Thanks for this wonderful feedback!

Thank you very much, you Comment makes me happy!

Thank you so much for your positive feedback!

Thank you Mark!

Thanks a lot!

I believe that expensive equipment is not important when it comes to bushcraft. A cheap Mora is also a great knife. Your creativity is much more important so that you can enjoy this hobby.

Thank you very much!

I wish that too!

Thank you very much!

Thanks for watching!

Yes... that should be the case...!

Thank you very much. The new knives and sheaths comes out in January 2024.

Danke für das Lob!

Thank you so much!

Thanks a lot for your intersting comment. Problem 1: Take a sharpening stone, a diamant file or what ever and round the sharp 90° edge of the spine on this place, where you put your finger in den Spine if you work. Problem 2: But the hook is opened against the ground.... and there is no Buckle where you can adjust something. It isn't possible that something get loos if you work. please send me pictures from your problem. Problem 3: The Tool Kit doesn't really work without the carrying sytem. There is a solution but the design of the Sheath and the toolkit is not designt for this.

Thanks a lot dear Steve!!

Thank you so much for your compliment!

Thanks you very much!

Thanks you so much!

Thank you very much!

😄😄😄 but you have to be patient until January. Until the new Knifes are on the market.

Danke lieber Stephan!! Von Dir zu lesen freut mich einfach immer speziell.

😂😂😂

Thanks a lot my friend!

Super... Thank you!

Thank you very much!

¡¡¡muchas gracias!!!

Thank you very much!

Hello Michael. Thank you so Much for your weekly support!

Thank you very much!

You are right. I have to make sure tnat they don't change the length of the belt!

By the way, if it isn't too late, then they might need to find another way to attach the sheath/holder to our belts. If I have other things attached to my belt, then it will be a bother to remove the sheath/holder from my belt. @@FelixImmler

As soon i know more i will make a video...

Yes, the launch date also annoyed me a bit!

Thank you very much!

Victorinox stopped the distribution because of problems with the sheath. Now the problems are solved. Im January 2024 the new knives should be avalable worldwide.

Danke für das tolle Feedback. Das freut mich sehr! Im Januar kommt die neue Scheide raus. Vielleicht können diejenigen, die mit der alten nicht zufrieden waren sie die gegen eine neu austauschen. Bin gespannt was Victorinox vorschlägt.

@@FelixImmler Ich muss die garnicht unbedingt tauschen. Die alte Scheide hat ja auch was. Tatsächlich habe ich mit einem Freund im Teamspeak gesessen und er meinte: "Rate mal welches Messer ich in der Hand habe!", und hat mit dem VicVenture geklappert. Das war schon eine lustige Situation.

Super, i glad to hear that. Never the less, please let me know how it is happen, that the blade broke...

Ich denke das wird so sein. Kontaktiere mal den Kundenservice...

I watched a trailer... seems to be a quite funny movie.

@@FelixImmler der Film ist superlustig und wie für dich gemacht. Du solltest ihn sehen 🙃 Ich wünsche dir ein schönes Wochenende Felix. LG, Andy.

Спасибо за ваш забавный комментарий!

Thanks a lot for your comment!

Thanks for watching!

Thanks a lot!!

Thank you very much!

Thanks a lot!

Super!!!!!

Haaa ha haaa, das ist ein uralt Video!! ...10 jahre her oder so!

@@FelixImmler Ja das waren die ersten Videos die ich von dir gesehen habe Felix...und ich muss nach den ganzen Jahren immer noch sagen es macht Spass dir zuzuschauen!! Wir sind quasi alte Bekannte (ohne dass du mich je gesehen hast) :D

Ich denke das wird kommen....

Thanks a lot for your honest Feedback!

Thank you very much... i will take this two Knifes on my list.

@@FelixImmler After viewing your video, I've given some thought to the idea of an "improved/new" Venture knife. The first thing about the knife itself that I would change is the thickness of the blade stock. I think 3,4mm is too thin and as the knife is pretty light, I believe it could easily be a bit thicker. Not a lot, but I think 4mm would be a real improvement. Gains: it would strengthen the knife especially towards the tip. I'd keep exactly the same edge geometry. This extra thickness would improve splitting ability, but not reduce the slicing/cutting/carving ability by very much. I'd keep the outer dimensions of the handle exactly the same - this means more weight from the extra steel, but some saving in less polymer. The overall balance point would move a fraction towards the handle end it's true, but not by much. Overall weight increase would probably be less than 1/2 an ounce, possibly only 1/3 or so, but I'm guessing here. The thicker spine would mean easier to grip if pushing on it especially where the jimping is. The knife would have better "feel" and "heft". Losses: weight obviously, but as it is a light knife anyway, this is not a problem. There might be an impact on the sheath design and manufacture, but, as has been suggested, there will probably be some redesign and rejigging anyway, so not a huge problem. Good luck with the improvements Felix, as I'm sure you'll be very much involved with the process. Cheers!

Thanks for watching!!

Yes... super if you take a stick!

Thank you... oh yes... that would look nice..

Thank you so much my friend!

Thanks for your feedback!

Thanks a lot for this compliment!

Do you mean something like this? www.victorinox.com/ch/de/Produkte/Schweizer-Taschenmesser/Accessoires/Leder-G%C3%BCrteletui/p/4.0548?cq_src=google_ads&cq_cmp=20407139976&cq_term=&cq_plac=&cq_net=x&cq_plt=gp&gad_source=1&gclid=Cj0KCQiA3uGqBhDdARIsAFeJ5r0rbZr4gDHL9CJclk8JqMxCEBGxxKwsJ3D9n4JG1qHHAENbj55dflgaAiPxEALw_wcB&gclsrc=aw.ds

Thanks for your comment. But i wasn't nervous....

I guess the basic one will be arround 70$. But we will see...

Ich verstehe deine Frage nicht...sorry...

Haaa ha ha haaaaa 😅😅😅 Thanks a lot for this wonderful words!

You have to remove the belt carry loop from the shath if you want to put the sheath into the carringsystem.

@@FelixImmler Yes, I did but it’s a very tight fit. Overall, love the system though.

Das war mein Vorschlag.... wurde aber abgelehnt

@@FelixImmler Hätte dauerhaft nur mit teurem wasserunempfindlichen Keramiklager funktioniert. Klar, das hätte den Preis verdoppelt.

The last Video for example was a Swiss Army Knife-Project only!

Yes..only the pro model...