No video :(

Estimating Land Surface Temperature Landsat 8 | ArcGIS Tutorial |

Подписаться 63 тыс.

Просмотров 104 тыс.

50% 1

In this tutorial you will learn how to calculate Land Surface Temperature of LANDSAT 8 Image using ArcGIS.
If you like this video, you can SUBSCRIBE this channel to get new video updates on GIS & Remote Sensing. Thank you.
Application of LST
Satellite temperature measurements are inferences of the temperature of the atmosphere at various altitudes as well as sea and land surface temperatures obtained from radiometric measurements by satellites. These measurements can be used to locate weather fronts, monitor the El Niño-Southern Oscillation, determine the strength of tropical cyclones, study urban heat islands and monitor the global climate. Wildfires, volcanos, and industrial hot spots can also be found via thermal imaging from weather satellites.
Related Tags: LST Calculation, Land surface temperature calculation by Landsat 5 and 7, Calculation of Land surface temperature, LST measurement, Land surface temperature measurement, LST, Landsat 5, Landsat 7, Landsat 8, Land surface temperature calculation, how to calculate Land surface temperature, how to measurement LST, how to measurement Land surface temperature, How to calculate Land surface temperature of Landsat 8 Imagery
If you have any query, Feel free to write me in comment section. I'll try to answer all of your queries. Thank you.
#Land_surface_temperature #Landsat_8 #GIS_RS_SOLUTION

Опубликовано:

29 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 698

@fernandal.galvezaranda6456 3 года назад

Thank you! I really learnt from your video and also I enjoy a lot the soundtrack 🔆

@hadronheyson4437 3 года назад

this is so helpful 😭😭 thank you so much i was so desperate for doing my exam but didn't know the full steps, thumbs upp👍

@GISRSSolution 3 года назад

Welcome. Please keep in touch. Thank you.

@halarousaidousouley3721 5 месяцев назад

Many thanks for your hardwork in the sense of sharing knownledge.

@MohitSingh-pb6bi 3 года назад

Thanks a lot buddy. You turned out to be my Savior. 🙏🙏❤❤ Please keep uploading such necessary awesome videos

@sivatejamatte8832 3 года назад

Very thankful to increase our knowledge, god bless you sir

@GISRSSolution 3 года назад

Keep in touch with this channel to get more videos on GIS and Remote sensing. Thank you.

@ARCH_CSDL 8 месяцев назад

Great Tutorial, Thanks!!

@GISRSSolution 8 месяцев назад

Welcome

@mozgurcelik 8 месяцев назад

The video is so good for me. Thank you ☺

@GISRSSolution 7 месяцев назад

You're welcome 😊

@kenyataanpahit1474 2 года назад

Dear Admin. With honour, First, i have to say thank you for this tutorial video. But, i have a question to you. What is the name of journal, or proceeding, or book that video used to make this tutorial ?? Please, tell to me 🙏

@w.w.8951 3 года назад

Dear, it is me again. One more question. I got two landsat datasets. One for landsat8- collection 1 level and the other for the collection2 level2. I wonder which one is better for LST? Thanks

@thomasmckeon2857 2 года назад

Great video!

@user-eq6df8pe9n Год назад

Do I need to remove the clouds from the landsat Band 10 data? I'm asking you a question because the data in the video doesn't look like clouds.

@eduardomorales1698 3 года назад

Hello, thank you so much, for the tutorial!. Only question. The final values are in ° Celcius?

@alowwong6672 2 года назад

Hi. Could you explain the formula of the land surface emissivity calculation? The emissivity of representative terrestrial materials for Landsat 8 TIRS Band 10 are constant values, right?

@w.w.8951 3 года назад

for the water bodies, the LST is pretty low and abnormal, such as -18 to -20 celsius. Any solutions for it?

@Puranamsagar 3 года назад

well explained bro.........

@khimsopheak9423 Год назад

Dear Sir, may you tell where to find the reference that you add 0.29 as a value for band 10 correction?

@_omortee_3257 Год назад

I need too. Thank you

@alele5410 3 года назад

i have seen the tutorial of lst by landsat 8 .it is good ,short and precise sir, please share the LST processing using landsat 5 and landsat 7 thank you for your kind response

@GISRSSolution 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4tG7mr2_mdc.html Pls follow this tutorial

@aiyndrilabhakta9432 Год назад

Sir... Now collection 1 level 1 band set is not available in USGS earth explorer which is used to do LST or NDVI mapping.... Can you please guide me how can I find that or Is there any other option we can use? It's urgent

@pruthashah4444 3 года назад

few days back i made lst maps and it was going all proper but since lst 2-3 it isnt showing the desired results

@precillanoablen9688 Год назад

hi, does the values of the formula of emissivity is constant in estimating Land Surface Temperature? or depends of the location of the area?

@mirzawaleed4930 3 года назад

Great video brother keep it up...

@GISRSSolution 3 года назад

Thank you brother.

@mrghosh17shorts 2 года назад

Calculate the land surface temperature of the Kamarhati Municipality area on multi temporal and multi seasonal basis (years: 1992 and 2022, December/January and April). Can you slove this?

@mohammadkamruzzman1836 Год назад

Hello, recent USGS EarthExplorer image metadata file does not have Radiance multiple Band, Radiance Add Band info. etc. In that case, how to calculate land surface temperature please suggest..

@basic9957 2 года назад

Hello sir, please can you elaborate more on the estimation of Emissivity. Which values did you factor in the equation. Are they the same values used for other images?

@angelatamoria4055 2 года назад

Do all procedures apply to landsat 8 level 2 products? Or do I need to skip some steps?

@SuperShinyable 3 года назад

Hi this is a really great tutorial! Perhaps do you have any scientific paper reference that backs up these formulas on this video? Thanks

@GISRSSolution 3 года назад

There are so many reference you will find in LST related research. However, I have mentioned here some of these. 1. Avdan, U., & Jovanovska, G. (2016). Algorithm for automated mapping of land surface temperature using LANDSAT 8 satellite data. Journal of Sensors, 2016. 2. Reddy, S. N., & Manikiam, B. (2017). Land surface temperature retrieval from LANDSAT data using emissivity estimation. International Journal of Applied Engineering Research, 12(20), 9679-9687. 3. Yue, W., Xu, J., Tan, W., & Xu, L. (2007). The relationship between land surface temperature and NDVI with remote sensing: application to Shanghai Landsat 7 ETM+ data. International Journal of Remote Sensing, 28(15), 3205-3226. 4. Malik, M. S., & Shukla, J. P. (2018). Retrieving of land surface temperature using thermal remote sensing and GIS techniques in Kandaihimmat watershed, Hoshangabad, Madhya Pradesh. Journal of the Geological Society of India, 92(3), 298-304.

@Dubcity72 Год назад

that's why he's the goat. THE GOATTTTTTT

@mrs_park8803 4 месяца назад

Do i need to do the TOA reflectance conversion too?

@sitifatinorain7942 3 года назад

can this method use for estimating the sea surface temperature (SST)? what is the next step after calculating the toa? thank you.

@pruthashah4444 3 года назад

even when i am applying the same formula as that in the video it shows wrong raster sign poping from below..... whats the reason for that ??

@cristianesantanagalvao1014 3 года назад

Have you rescaled the band 10 from 16 to 8 bits? Before this process?

@mohammadeqbalpopal3974 2 года назад

how do change this LST to air temperature in 2m above ground?

@ZulfiqarAliAbbas-jass 8 месяцев назад

Very Informative

@GISRSSolution 7 месяцев назад

Glad it was helpful!

@anitayadav9387 2 года назад

Sir can i use aster data for land surface temperature? In Landsat data and Aster data, whose data is more correct for land surface temperature, pls sir reply

@shalugeorge6075 2 года назад

Sir, what is the correction value of band 6 in landsat 5 and landsat 8

@adefebrian4045 Год назад

The values of Band 4 and Band 5 are different, has this been corrected? how to correct it?

@topiscrotis5171 3 года назад

Great video! How can we see the average temperature of the study area?

@bhawnapathak6701 Год назад

Why am I getting the same values for land surface emissivity as shown in the video?

@surabhisoni3460 2 года назад

Does constants we are considering for formulas from MTL file varies when we apply this formula to a clipped area of whole image?

@GISRSSolution 2 года назад

The constant is same

@samnavin9616 2 года назад

Dear sir...what is the 0.004 value corresponds in Land Surface Emmisivity

@jonathanallsup4836 2 года назад

Where did you get the list with the K constants? Great video!

@GISRSSolution 2 года назад

from literature

@sundarsubedi1546 2 года назад

Thank you.

@GISRSSolution 2 года назад

you are welcome

@kageyama7934 Год назад

Are the temperature values of the LST map in degree Celsius ?

@damarisfernandafredespuent6834 3 года назад

Hi! thanks for the tutorial, can LST analysis be done with Landsat 7 and 8 images, for multitemporal analysis?

@GISRSSolution 3 года назад

Yes you can!

@user-wg5jw5ys4d 3 года назад

I hope you to reply to about this question. In calculating PV, some other learning video insert the min NDVI as minus, although the min value was minus. Which one is right??

@GISRSSolution 3 года назад

min NDVI as minus

@RevMck 3 месяца назад

hi, do you still send this document to people who need it?

@debobratasadhukhan8493 3 года назад

Why the NDVI Value doesn't come +1 and -1 in your tutorial? time 10:44 sec

@Wow-oz4ym 10 месяцев назад

Excellent! But I wonder why my output gives me too large value to consider as Celsius whenever I compute the LST following these steps, one after another. Pls, did u do something to the bands before the lst computation??? 👍

@salamander5969 10 месяцев назад

I see some other video that you should convert it into celcius, assume that the result is Kelvin, and subtract by 273

@Wow-oz4ym 9 месяцев назад

@@salamander5969 okay, I see! But I also notice that the higher values of the LST are around areas with vegetation and Water bodies, while the areas with built-up density have lower values. This in reality shouldn't be true. So, how do I invert the LST values pls? 🙏🏾

@spartakos536 9 месяцев назад

@@Wow-oz4ym i completed these steps, and as you did, i also saw high temp. values that not considerable.

@ARCH_CSDL 8 месяцев назад

@@Wow-oz4ym but there are several factors that could explain this phenomenon: The time of day when the LST data was captured is crucial. Vegetation, such as in green spaces and farmlands, can heat up quickly under direct sunlight but also cools down rapidly after sunset. In contrast, built-up areas tend to retain heat longer due to the urban heat island effect. If your data was captured during midday or early afternoon, it's possible that the vegetation areas were at their peak temperature, while the urban areas had not yet reached their maximum. Check the metadata and find when the data was captured on that date (Scene_Center_Time) and then convert it from UTC to your local time. If it is early morning, then it makes sense.

@nurfarhanaabdulaziz1949 3 года назад

hi...i want to ask, what if i don't minus 0.29 during calculate radiance?

@elizamcmaster3379 2 года назад

What does the value 0.004 represent for emissivity?

@zarraftajwar6429 2 года назад

Hello, while calculating the PV you were showing NDVI-NDVImin but in the raster calculator, you have calculated NDVI+NDVImin.. Which one is correct ?

@Thesophinetsang 2 года назад

because the NDVI min is negative value

@dvalkanis 3 года назад

I apriciate alot this informative tutorial... could you please send me the documents? thanks alot..

@rakgeospatialsolutions1983 2 года назад

Please I have followed the procedure but after calculating for LST the data wasn’t showing again on the data view

@khruveluchizo1587 2 года назад

And also which version of ArcGIS are you using ?

@BleyCraft Год назад

Sir, i need help! Where did you get the 0.29 as correction value for band 10 to calculate the TOA Radiance?

@rakhi178 Год назад

Yes, I have also the same doubt. Could you please clarify?

@oguzgokce18 Год назад

www.usgs.gov/landsat-missions/landsat-8-oli-and-tirs-calibration-notices answer was hard to find. but found at last, cost me about an hour

@user-ff5fj5or2y 10 месяцев назад

Pls Sir, can the same steps be followed for a LANDSAT bands 4, 5 and 10 that are downloaded from USGS C2, L2? I've attempted several times but the high LST value finally was more that 200, and the low value more than 50! That can't be possible

@kingsleykanjin3308 9 месяцев назад

Have you found the answer to your question? I am facing the same challenge.

@ARCH_CSDL 8 месяцев назад

I used the same steps for Landsat 8 and it worked perfectly. A tip: make sure you download the Landsat on a date without clouds. @@kingsleykanjin3308

@sahanasjalageri1092 6 месяцев назад

Tqsm for dis but i want the topic about forest change detection on land surface temperature pls can u help me 🙏

@fernandaarevalo4787 5 месяцев назад

Hi, very helpful video! Can I also pls get the document:)

@barnasarkar6610 3 года назад

After creating the project after completng all the step the range is coming to a 4 digit no , which is not suppose to come , what m i suppose to do ??

@MohitSingh-pb6bi 3 года назад

Which algorithm it is ? mono window algorithm ? single channel algorithm ? or split window algorithm ?

@lassinesanankoua4743 2 года назад

tHANK YOU

@skriyajulislam817 4 месяца назад

which algorithm used for this performances

@mulatamare5175 2 года назад

is are any differences if I will apply computation of LST in clipped data based on my study area?

@GISRSSolution 2 года назад

You can do it.

@SachinSharma-mc7gk 3 года назад

For example. When we download satellite data from google earth engine...then how we can bifurcate the data into several bands....please answer

@aprizalverdyansyah3873 2 месяца назад

how do you get 0.29 in TOA spectral radiance?

@sanjananakod54 5 месяцев назад

Is that ok if the LST comes in negative values

@EMINOUELABGHARY 4 месяца назад

I found a problem in calculating PV. raster calculator does not work

@saidokieh2493 3 года назад

Good tutorial,otherwise do u have any video concerning about NDVI time series data with 12 years spam ....how to extract ndvi as a polygone area...

@GISRSSolution 3 года назад

Please check my other videos, you will find NDVI and relevant others. Thanks

@greeshmasaju8495 3 года назад

can you help on how to analyse LST and NDVI

@divyapg6859 Год назад

Broplz small question area ku thakutha matiri lst value variation varuma bro

@shubhayanroychowdhury1048 2 года назад

Is it mono window algorithm which was used as LST retrieval algorithm??

@basic9957 2 года назад

yes

@derekotieno3268 3 года назад

Hello, what is the correction value for band 11 if I wanted to do the conversion to TOA Radiance? You have only listed for band 10 as per the video.

@GISRSSolution 3 года назад

You will find it in MTL data

@derekotieno3268 3 года назад

@@GISRSSolution Found it. Thanks.

@GISRSSolution 3 года назад

@@derekotieno3268 you are welcome.

@MasoudZamanipoor-um1ic 9 месяцев назад

What is the algoritm name that you used?

@hamzanoor2558 2 года назад

plz make a video of lst prediction

@joshisaiprakashchowdarymot4269 2 года назад

Sir how to predect the future LST with present LST data @GIS & RS Solution

@rakeshranjan280 3 года назад

It will be a great help if you send the document elaborating the process shown in your video. Secondly, is there any solution to saturation temperature being very low in the LANDSAt 8 TIRS data.

@GISRSSolution 3 года назад

Please Write your email here so that I can send you.

@rakeshranjan280 3 года назад

ranjan685@gmail.com. Furthermore, can you explain how to calculate the area over a specific cut off temperature.

@GISRSSolution 3 года назад

@@rakeshranjan280 I have sent you the documents. Anyways, could you please elaborate your questions again? I did not get your points. Thanks.

@Geozike23 3 года назад

@@GISRSSolution can you please send me the documents... Isaaczene27@gmail.com

@justinekarenlanohan5798 8 месяцев назад

Hi can i have the copy of the document this will be a great help for my research study. Thank you.

@surajs5266 Год назад

I am trying to automate these steps in the model builder. Any method for getting the min and max values of the NDVI raster without manually typing it?

@atha1678 Год назад

hi you manage to do it?

@surajs5266 Год назад

@@atha1678 No!

@thisgirl99 7 месяцев назад

Hi, I know it's too late but putting it here in case someone needs it: You should use Get Raster Properties tool and choose max and min And then from the model only tools, add the Calculate value too for each of them. And that's it!

@gebrehiwotgetu2259 3 года назад

thank you again!!! if you other files with regarding of remote sensing data, please give me? I need your help

@GISRSSolution 3 года назад

Please write your email ID here

@adefebrian4045 Год назад

for band 4 and band 5 how is the correction?

@angheloolivaressolis8043 Год назад

Is the same for landsat c2 l2 SR ?

@eduardograjaleshernandez4081 3 года назад

Hi, could do You do the same in QGIS?

@pradyutbera5727 Год назад

Can you, Sir, kindly provide that guiding material (steps for calculation in pdf)?

@darshankumarjajoria634 Год назад

I am calculating the Jaipurs LST , I get 99 - 75 values of temperature is it correct ??

@casualguy2991 Год назад

I got the same problem for central germany. Would be nice if someone who soöved this problem can share their experience.

@brianmassawe6800 6 месяцев назад

What Is The Unit for LST in This Process

@nehakhajuria8651 Год назад

How to solve the value of radiance mult. Factor?

@drhamdynabeih1126 2 года назад

I would like a PDF copy of the research, please

@sahanasjalageri1092 5 месяцев назад

Which algorithm is used for dis

@javedchoudhary3125 2 года назад

Sir Humne 0.0003342 kaise calculate kiya pls tell me and thus value is same for every satellite for band 10 or not pls tell me

@chandrimaghosh3638 2 года назад

same query.plz respond

@Al_Sakib_Rahman 8 месяцев назад

same problem!!@@chandrimaghosh3638

@sanjananakod54 5 месяцев назад

How to verify that the done process is correct or not?

@zainaabughli 3 года назад

Can anyone help me how to make Kuwait in one map instead of four scenes from Landsat ?

@andilemazaleni2784 2 года назад

Please kindly assist on how to calculate Land Surface Albedo

@GISRSSolution 2 года назад

I will try to do a video on it

@andilemazaleni2784 2 года назад

@@GISRSSolution please 🙏🏻

@imchatur 2 года назад

if min ndvi is negative, we should take it as it is?

@Zeeshancheema67 Год назад

Yup!

@eduardorojas2121 7 месяцев назад

Hi, im having problem with the temperature range in lansat 8 y 9, the range is too hig, like 80°C and 40°c for the minimum, how can i fix it??? im following tutorial to 100%.