Input 100-220VAC/50-60Hz
Temperature Selection Range 30~70℃
4 Working Modes---Standby/Constant Heat-up/Timer Heating/Programming
Programming Mode
This mode provides 3 heating phases for user to manage daily heating parameters based on different demands. The controller will base on settings to operate day by day unless user selects to change its work mode.
After a 3 seconds long touch on(Timer key)at either Standby or Constant mode, started off this function.
User needs to program time & temperature settings at first time. After all related parameters input, the controller would works rely on the setting immediately.
There are 3 different time zones could be used. It means user could just have maximum 3 phases to manage temperatures in a day. In the case of the ending time was input at 23:59 on either P1 or P2, user could not have the chance to build up the parameters of next phase.
User might rebuild the program by a long touch on(Timer key)again after entering in Programming Mode at anytime.
To quit the heating process of Programming Mode is to touch either(Timer key)or(Power key)
WARNING: These products must be installed by a qualified electrician. The element must only be used with water and should be turned on only when it is fully immersed in water.
23 ноя 2021