Тёмный

Eventuri Intake Review [BMW E46 M3] Installation & Sound Comparison |  

SPANNER RASH
Подписаться 17 тыс.
Просмотров 24 тыс.
50% 1

Check out ‪@Eventuri‬ and ‪@EvolveAutomotive‬ to find out more about these awesome intakes.
Here are stockists you can buy one from:
Haz Motorsport: ebay.us/AdBAEQ
Amber Performance: ebay.us/nDUBz7
Tegiwa: ebay.us/rTmJIP
In this video, I pull my BMW E46 M3 into the garage after months of working on the E30, and give it some well-deserved love and attention, in the form of a new intake from the guys at Eventuri and Evolve.
00:00 Intro
00:45 My BMW E46 M3
01:39 Unboxing
03:36 Why Eventuri?
05:43 Stock Intake Sound
06:44 Installation Guide
13:02 Eventuri Intake Sound
18:17 Conclusion
20:49 Stock vs Eventuri Sound
I’ve always dreamed of fitting the full BMW E46 M3 CSL carbon air box to my car, for the noise alone, but with their prices soaring, I think the opportunity may have vanished for me to pick one up, so I;'ve been stuck with the stock plenum, air box, and panel filter for years.
Eventuri’s unique E46 M3 intake design has been on my radar for quite some time, but I’ve always been a sceptic of bolt-on aftermarket intakes, they often look a lot better than they perform, and in some cases even cause a loss of power thanks to things like heat soak in the engine bay.
After doing plenty of research into the Eventuri intake for the M3, I came to realise that this one is different. It’s clearly evident that the guys at Eventuri and Evolve take engineering very seriously, and are very proud to show that off by sharing detailed data and even air-flow models from their research and development to back up their stated power gains.
After all, more air and fuel in equals more power, so increasing the intake air velocity and smoothness is certainly compelling in the quest for performance. The Eventuri intake achieves this by invoking the venturi effect (hence the brand name) thanks to the design of the bell-shaped carbon fibre filter housing and aerodynamic reverse cone air filter.
For the BMW E46 M3, Eventuri state increased horsepower of 10-15hp and 8-12ft-lb of torque, which I find to be impressive on the standard ECU map tune of this already highly strung naturally aspirated S54 powered car.
Further to this, they promise upwards of 360hp when the E46 M3 Eventuri intake is paired with their Evolve remap.
As stated in the video, I’m not really trying to tease more performance out of the S54 motor, the stock power is more than enough for the road use the car gets. It never goes on track either.
But the promises of a performance gain does provide plenty of reassurance in the quality and design of the E46 M3 Eventuri intake, and I can feel pretty certain I won’t be hampering the performance of my M3 by fitting one.
However, what really pushed me to pull the trigger on buying an M3 Eventuri intake was the promise of aural pleasure.
Many owners attest to the increased induction roar and intake noise generated by Eventuri’s design, stating that the Eventri intake effectively turns the M3’s S54 engine into a musical instrument played by your right foot, just like the CSL plenum is famed for.
Knowing the full CSL airbox is out of reach, and discovering how accessible the Eventuri intake is compared, in terms of both cost and difficulty, I had to have one.
Once I’d got over the beauty of the intake I’d received, fitting it to the car was a breeze. Evolve Eventuri have done an excellent job with their PDF guide. Installation only requires simple hand tools, so even someone with no mechanical experience would succeed in fitting it. I was off to a good start.
Once fitted I allowed the car to warm through, initially unsure of any change in sound as the car idled. On the open road, with sufficient oil temperature, I was able to apply more than half throttle for the first time and was immediately showered by harmonious induction noise as I sat in the driver's seat grinning from ear to ear.
It seems the Eventuri intake makes most of its tuneful intake noise between 3000 and 6000 rpm with the throttle bodies wide open. In this rev range, a very definite and characterful bark has appeared, adding to the already great driving experience of the E46 M3.
So far, I can wholeheartedly recommend the Eventuri intake for BMW E46 M3. This video is not sponsored and all opinions are my own.
#eventuri #evolveautomotive #eventuriintake #e46m3 #bmw #bmwm #bmwm3 #bmwm3e46 #intakesound #intake #mods #airbox #eventurisound
For more helpful how-to guides and restoration project logs, visit our blog: www.spannerrash.com/bmw-e46-m...
As an Amazon Associate, Ebay Partner and Awin Affiliate, we earn a small commission from qualifying purchases. Some of our links are affiliate links, and if you decide to purchase things through them, we earn a small commission. It costs you nothing but helps us to keep the content coming. Thanks for your support!

Авто/Мото

Опубликовано:

 

15 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 105   
@kayhanozdemir4542
@kayhanozdemir4542 Год назад
Thanks for the video. I think this might be best E46 M3 Eventuri intake review. I have been long searching for such a good quality back to back noise comparison. I am planning to buy this kit just to amplify the lovely induction noise. And just like you I would not expect a power increase; a claimed 10HP+ increase without engine tuning seems unlikely considering that CSL has different cams and a whole new carbon induction system to increase power from 343 to 360HP. Anyways, waiting for more flyby videos!
@SPANNERRASH
@SPANNERRASH Год назад
Awesome, thanks Kayhan! I knew this would be useful for people as I was searching for the same when I was looking to buy one. In the end I decided to take a punt and find out for myself. 😃 I'm still absolutely loving it, it really brings out the character of the S54 nicely, it's here to stay. I reckon you should go for it too. There may be more footage in the future as the M3 features more on the channel. Plenty of bits to do as always.
@kayhanozdemir4542
@kayhanozdemir4542 Год назад
@@SPANNERRASH I finally sourced a second hand kit. Now I need to clean the filter and install it. Thrilled!!!
@SPANNERRASH
@SPANNERRASH Год назад
@@kayhanozdemir4542 Congrats on sourcing an Eventuri, you'll not be disappointed. Still loving mine, been really enjoying it with the widows down now the weather is good! Glorious noises. Hope the vid helps you with a smooth install, although their own PDF guide has you covered. 👍
@rayman1230
@rayman1230 8 месяцев назад
Hands down one of the best sounding 6 cylinder engines I’ve ever heard 👍
@SPANNERRASH
@SPANNERRASH 8 месяцев назад
100%, the S54 really sings, and it's amplified by the intake for sure. It's addictive! 😁
@andrewwood5256
@andrewwood5256 Год назад
So this video ended up costing me a lot of money, went ahead and ordered one for my z4m while I watched. By far the best video for sound and install. Thanks
@SPANNERRASH
@SPANNERRASH Год назад
Cheers Andrew. Glad the video helped you make a purchase decision for the Z4M, I bet you won't be disappointed, I'm still loving mine. 😎
@gibsonlespaulspecial
@gibsonlespaulspecial 5 месяцев назад
Am really interested in doing this to my Z4M, thanks for a quality review and production on this.
@SPANNERRASH
@SPANNERRASH 5 месяцев назад
Cheers mate, hope the vid is helpful for you. Loving the Eventuri on my M3 still, I'd recommend it!
@TotallydubbedHD
@TotallydubbedHD Год назад
Amazing comparison and video, thanks for sharing!
@SPANNERRASH
@SPANNERRASH Год назад
Cheers, glad you enjoyed it!
@R8_Jake
@R8_Jake 3 месяца назад
Brilliant review and install guide. I can’t wait up fit my Eventuri to my Z4m. Also S54 albeit slightly different fit, but the instructions that comes with it are so user friendly 👌🏼
@SPANNERRASH
@SPANNERRASH 3 месяца назад
Cheers Jake, glad you enjoyed it. Good luck with the Z4m install, I suspect you're going to love the sound of this intake. 😃
@MrBarkerz123
@MrBarkerz123 11 месяцев назад
Excellent video, will be fitting mine on Sunday!
@SPANNERRASH
@SPANNERRASH 11 месяцев назад
Awesome, hope you like it as much as I like mine. 😃
@BMWarrior1
@BMWarrior1 Год назад
im loving the spec of your E46 M3 - the intake sounds great
@SPANNERRASH
@SPANNERRASH Год назад
Thanks! I'm very fond of the red on red. 😁
@farufas
@farufas 5 месяцев назад
Fantastic Review ✌🏾
@SPANNERRASH
@SPANNERRASH 5 месяцев назад
Thanks mate!
@mittortz
@mittortz Год назад
thank you for the best review on this I've seen/heard so far! (and I've watched a lot of these) Seems like a no-brainer compared to the CSL-style intakes in terms of value. Just can't justify the cost on my 172k-mile M3 for the "real deal" even though it's in excellent mechanical shape. But this seems like it'll give me what I want without the hassle. Let me return the favor by recommending the 4.10 diff upgrade, if you haven't done it already (going to watch your other videos now, maybe you have) EDIT: looks like you just got into this thing, let me tell you that the 4.10 final drive and Autosolutions short shifter are near essential OEM+ upgrades for this wonderful machine.
@SPANNERRASH
@SPANNERRASH Год назад
Thank you Marty, and yes I concluded the same about it being a better value option to the CSL intake, I'm still really enjoying the sound, it makes the already wonderful S54 a lot more characterful. Thanks for the 4.10 diff recommendation, this is definitely something I'm considering as a future upgrade for the car. My only reservations are the cost and the additional RPM when motorway driving, but maybe that's a smaller issue than I imagine? Regarding the shifter I've installed a 545i shifter and F10 M5 illuminated gear knob which shortens and sharpens the shift nicely. I've actually had this M3 for something like 7 years, and made a few subtle tweaks to it, although there's not much on the channel about this car currently as most of this was don't way before I ever thought of recording any of it. 😀
@bootywarrior6958
@bootywarrior6958 Год назад
DUDE THAT SOUNDS LIKE A MCLAREN F1 THATS SO COOL!!!!
@SPANNERRASH
@SPANNERRASH Год назад
Haha or half of one! 😆
@whuhammer66
@whuhammer66 Год назад
Yeah recently thought the same, they're almost identical. Bmw did build the f1s engine so is half in a way lol
@darrend2035
@darrend2035 Год назад
Yeah basically a S54 is like half of the legendary F1 V12
@SPANNERRASH
@SPANNERRASH Год назад
@@darrend2035 Exactly! 😁
@imadude85
@imadude85 10 месяцев назад
Thats amazing. Sounded almost like the McLaren F1.
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
Haha! Maybe more like a McLaren F1 running on only one bank of cylinders. 😂 I'm still loving the bark of the Eventuri, really brings out the S54 induction sound.
@user-ns4ot5ro6i
@user-ns4ot5ro6i 11 месяцев назад
Great review. I appreciate the time and effort needed to show the differences. I'll leave that to you though. All the extra noise (volume) isn't my thing.
@SPANNERRASH
@SPANNERRASH 11 месяцев назад
Thanks! Its all about the noise of the S54 for me, love it. :D
@BiffTannenBTTF
@BiffTannenBTTF Год назад
Jesus that sounds great. I need one on my imola m3! It almost sounds as throaty as a v8, which is interesting. It seems twice as loud!
@SPANNERRASH
@SPANNERRASH Год назад
It really brings the S54 to life, I can whole heartedly recommend the Eventuri. Still loving it now. 😃
@Smokey-mt6ye
@Smokey-mt6ye 6 месяцев назад
Great video mate. If you remove the sound pad under the hood. You will get a slightly better sound. Cheers
@SPANNERRASH
@SPANNERRASH 6 месяцев назад
Cheers! Interesting idea, I was thinking about that actually. My only worry is whether the engine heat might damage the paint on the top of the bonnet. I'm also not sure whether BMW painted under that pad, but I may check. 😀
@jonboyy1327
@jonboyy1327 2 месяца назад
Superb video & guide. Can I ask if you had any microphones in the engine bay or where they only cabin recordings ?
@SPANNERRASH
@SPANNERRASH 2 месяца назад
Hi Jon, really hard to represent what something really sounds like in the flesh. Too many factors like what my microphone can record, and what sounds your speakers turn that into. Check 05:43 in the video to see where I mounted the mic in the engine bay. I used a combination of cabin and engine bay sound. I think the key here is to check the comparison between stock and Eventuri, then you can get a sense of the difference, and that is a genuine representation as I mounted the mic exactly the same both times. Hope that helps!
@flippy9133
@flippy9133 Год назад
some outside clips would be nice too
@SPANNERRASH
@SPANNERRASH Год назад
Hopefully I can catch some in the near future. I was more thrilled by the sound from the driver's seat though. 😁
@mattireland497
@mattireland497 Год назад
Great video, Imola on imola looks great 👍🏼 Read on forums about problems relating to this kind of filter messing up the maf sensor unit, anything to report now you've had it fitted a while? Any difference to how the car runs (cold starts ect)?
@SPANNERRASH
@SPANNERRASH Год назад
Cheers Matt! I'm still loving the Eventuri filter, absolutely no issues to report at all. I also saw people complaining about certain types of filter and the MAF, but I think that's more often relating to the oils some of these filters are soaked in from new. You quite often notice the K&N style panel filters are quite greasy to the touch and this is what coats the MAF and causes it to play up. the Eventuri filter feels like the dry type, just the same as the BMC panel filter it replaced.
@pointaDNB
@pointaDNB 2 месяца назад
For me the before sound (stock exhaust) is much more better with those metallic resonances 🙏
@SPANNERRASH
@SPANNERRASH 2 месяца назад
Still plenty of rasp, I wouldn't dream of changing the exhaust. 😆 Each to their own though, people like different things!
@pointaDNB
@pointaDNB 2 месяца назад
To spend the money at first place I think I will put a karbonius intake manifold respecting the stock exhaust so the induction sound should be pretty good too
@becomematrix
@becomematrix Год назад
Nice horn!
@SPANNERRASH
@SPANNERRASH Год назад
Hahaa, it's a horn?? 😂
@becomematrix
@becomematrix Год назад
@@SPANNERRASH definitely shaped like one but it amplifies the induction noise ofcourse
@SPANNERRASH
@SPANNERRASH Год назад
@@becomematrix Yeah I can definitely see where you're coming from with that mate! 🤣
@becomematrix
@becomematrix Год назад
@@SPANNERRASH when I saw the title I thought you’d gone full carbon airbox 😜 but this sounds awesome as well. The red m3 looks great tbh.
@SPANNERRASH
@SPANNERRASH Год назад
@@becomematrix Maybe the full carbon air box one day, but I'm trying to not over-mod this car as its pretty sweet as it is. Always difficult not to go too far with these things! 😂
@VWAlexo
@VWAlexo Месяц назад
Sounds amazing! I have 2 questions : 1- did you add the SMG shift lights by modifying the hex code in the DME? If so, do you have more information? 2- did you have your steering refinished with new leather? Looks mint! Thanks, Alex 🇨🇦
@SPANNERRASH
@SPANNERRASH Месяц назад
Hey Alex, still loving the sound of the Eventuri. :D 1 - It was coded buy Mirror John quite a while back, they're a really nice touch aren't they? How he coded it however I'm not certain, maybe he used something like NCS Expert. 2 - Yeah the wheel was sent off to Royal Steering wheels who retrimmed it along with the handbrake. I've had a few wheels done with them and they always come out perfect and last. The gearknob is a new OE F10 M5 illuminated one and the wheel and hand brake leather match that perfect following retrim. Hope that helps!
@captainkirk1983
@captainkirk1983 18 дней назад
Great video, inspired me to get mine. Quick question, are your csl wheels originals or reps? If they’re reps, which ones are they and have they been ok for you?
@SPANNERRASH
@SPANNERRASH 18 дней назад
Hi mate, hope you're enjoying the intake, still love mine. The wheels are reps, bought them a long time ago from CM Wheels, the ones regularly banded around on M3Cutters forum. I think they're a forum sponsor. Generally regarded as good quality. The original BMW CSL wheels are notorious for cracking so to me, they weren't worth the significant extra cost. Hope that helps!
@ESKATEUK
@ESKATEUK 4 месяца назад
I’m sold. First I just need the m3 😂
@SPANNERRASH
@SPANNERRASH 4 месяца назад
Hahaha! The noise alone is enough to justify getting one 😄
@jjustdrive7894
@jjustdrive7894 10 месяцев назад
Is there a plenum upgrade you can add too to the eventuri kit. Plus evolve can put the CSL map on plus one for the SMG if you have it
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
Hmm I think at the point of plenum upgrade you're best just going for it with the carbon CSL airbox. I believe Evolve sell this setup themselves.
@vitorauseo854
@vitorauseo854 5 месяцев назад
Hi there. Great video. Just curious, did you notice any LOSS in power or lower rpm pep? I only ask because I once had an experience with an e46 m3 with an AFE cone filter set up and it actually caused a loss of off the line pep/power. So just curious
@SPANNERRASH
@SPANNERRASH 5 месяцев назад
Hmm, no I can't say I noticed that. In theory, it should have added power, in reality, I can't feel that it has. But maybe with the right map it would be a different story.
@Ayixlia
@Ayixlia Год назад
Should've done a few fly byes to actually hear how does it sounds.
@SPANNERRASH
@SPANNERRASH Год назад
I may do a follow-up video on this with more external sound clips at some point. Still loving it from the driver's seat, which is where it matters most IMO! 😃
@Ayixlia
@Ayixlia Год назад
@@SPANNERRASH Exactly.
@aaronroper909
@aaronroper909 10 месяцев назад
Who cares what it sounds like for others you want it all in the cabin ❤
@loudchris53
@loudchris53 7 месяцев назад
Sounds amazing. Does it drone more at part throttle or when you dont want it to be loud?
@SPANNERRASH
@SPANNERRASH 7 месяцев назад
No drone at all, just sounds better and slightly louder when the throttle is open. I definitely recommend it, there are no down sides imo. 😃
@cdeprima1209
@cdeprima1209 5 месяцев назад
Nice cars, I say use straight 30 weight to reduce rod bearing wear, too many guys use thin oil; or use Lucas oil treatment, contains extreme pressure grease and gear oil possibly with cheap thin oil, really! Hate to see people wear out such nice cars! Cheers! :)
@SPANNERRASH
@SPANNERRASH 5 месяцев назад
Thanks! Since I had the bearings replaced a few years ago the car hasn't done many miles and I'm probably over-careful with warming it up when it comes out. Mr Vanos who replaced them advised to use a higher quality 10w60 from like likes of Liquimoly to uphold his bearing warranty. The Castrol stuff turns out to leave bad deposits. I've not played around with different weights, I'd be a bit scared to do that on these engines, but it's definitely an interesting idea.
@ES-REDROT
@ES-REDROT 5 месяцев назад
So I noticed you have the microphone in the hood here by the intake. How much of this noise actually makes it in the cabin? Is the intake noise in the cabin now a lot more aggressive then it was prior?
@SPANNERRASH
@SPANNERRASH 5 месяцев назад
Its tough to represent the cabin noise alone with a mic so to get more of a comparison using cabin combined with engine bay sound worked well. With this intake I'd say its all positives. It's not "very loud", nor is it constant. So it wont get on your nerves if you daily drive the car. It is louder and a more aggressive intake tone only when you exercise the throttle pedal. So when you're driving spiritedly it sounds awesome, when you're cruising around you'd barely notice a difference. Enough of the sound reaches your ears as you drive for it to really enhance the driving experience, it's very noticeable for all the right reasons. I'd 100% recommend it, the only downside is they are quite expensive to buy.
@matthewnicholas6365
@matthewnicholas6365 9 месяцев назад
Snagged a used one of these I'm picking up in a few days. Missing thr bumper scoop which im not convinced is the end of the world. Basically half the price of a new one, so about a quarter of a csl style box.
@SPANNERRASH
@SPANNERRASH 9 месяцев назад
Sounds good Matt, I'm not sure the scoop is make or break, but if you are really bothered apparently there's a 45 degree pipe you can buy from a hardware store that will do similar. It sounds great, you're going to love it.
@leekindell9937
@leekindell9937 Год назад
mmm i may have to buy one,,,i wanted an airbox but they cost so much more and ive just spent 2 plus grand on subframe lol...sounds good. Very good idea putting those clips at end of video to show difference,......PS what phone mount is that
@SPANNERRASH
@SPANNERRASH Год назад
I'm still really impressed with it, really brings the character of the S54 out, sounds so good. And I feel your pain, I had the boot floor reinforced a long time ago. If you thought that stung wait till you do the rod bearings! 😅 They're amazing cars though, they get a lot of love and with good reason. Worth taking care of. The phone mount is one of these: ebay.us/XgVpHb
@leekindell9937
@leekindell9937 Год назад
@@SPANNERRASH oh thanks. The bottom end of engine done last year by previous owner so that’s sorted. But your intake does sound great. I’ll maybe get that in couple of months I’m only 30 min from evolve so they fit for free
@SPANNERRASH
@SPANNERRASH Год назад
@@leekindell9937 No worries, sounds like you've got a particularly nice example then! 😁 Thats handy being near Evolve, I'd take advantage of that too.
@abr5819
@abr5819 Год назад
Wow 2grand ? I’m gonna do a Vince bracket , and epoxy plates provided it isn’t too bad underneath
@fayazsirkhot8577
@fayazsirkhot8577 Год назад
Sounds awesome, any fly bys?
@SPANNERRASH
@SPANNERRASH Год назад
Cheers Fayaz, sadly didn't get much external footage, maybe I'll add some more at a later date in a separate video. The intake is here to stay I think. 😁
@caseynavarro412
@caseynavarro412 3 месяца назад
You think this intake would fit on a 325xi I’ve been looking all over to see on forums if it would fit I don’t see why not if I swap to m3 bumper or just cut an intake hole lol
@SPANNERRASH
@SPANNERRASH 3 месяца назад
It almost definitely wont be a straight swap, but with some creativity I bet you could make it work. Its designed to work with a specific MAF sensor though. But maybe the M3 one is the same as a 325i? I'm not sure honestly.
@Khxn0
@Khxn0 Год назад
Bro what stereo do you have fitted
@SPANNERRASH
@SPANNERRASH Год назад
I think the brand was called Erisin. It's a great match to the original head unit in style but running on Android. I've had it a few years so it's an old one compared to current models. It still works really well though. Hope that helps.
@TheLololol96
@TheLololol96 Год назад
Mate, what headunit are you using?
@SPANNERRASH
@SPANNERRASH Год назад
Hi mate, I believe the brand is called Erisin. It's a great match to the original headunit in the car but runs Android. I've had it a few years now so it's probably an old one compared to current models. Works awesome though!
@TonmoyGhosh
@TonmoyGhosh Год назад
Where is the mic mounted?
@SPANNERRASH
@SPANNERRASH Год назад
I show the exact location of the mic in the video here: 05:44 I had the exact same mic, in the exact same place for both before and after. Proper science this! 😆
@davidh4632
@davidh4632 Год назад
Is the microphone in the cabin or in the engine bay?
@SPANNERRASH
@SPANNERRASH Год назад
Hi David, both a mic in the cabin and the engine bay, but for the driving the engine bay mic is turned up and the cabin sounds down. It sounds great in the cabin in person, I'd say its a pretty fair representation, especially the relative difference between stock and Eventuri. Check 05:43 in the video to see where I mounted the mic in the engine bay. 👍
@davidh4632
@davidh4632 Год назад
@@SPANNERRASH thanks for confirming, I thought it was a little much intake noise for reality.
@mittortz
@mittortz Год назад
@@davidh4632 "reality" changes quite a bit though, in my experience... windows up/down, ambient noise, etc.; plus the acoustics of mics only in the cabin from other youtube videos actually seem to differ far more from my personal perceptions of actually being there. I think @SPANNER RASH did a magnificent job of capturing the "real feel" based on the stock recordings vs. my stock experience and now I'm fighting ordering an eventuri intake impulsively...
@paul1der
@paul1der 10 месяцев назад
those filters trade sound for filtration. not a good trade off hence why the csl air box with oem csl filter is better
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
The Eventuri filter is extremely high quality, which is obvious when you're having a close look at it. It's still an aftermarket style filter though so probably doesn't remove as many fine particles as an OEM paper one, but I'd say it was at least as good as a K&N or a Pipercross style air filter. Like you say, versus a paper one, these aftermarket filters trade some filtration for sound and air flow. As I don't do thousands of miles in the M3 these days, I think the filter is more than adequate. 😄
@BMWarrior1
@BMWarrior1 10 месяцев назад
hey mate, what shifter do yo have in it? E60 short shifter?
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
Hi mate, it's a E60 545i shifter combined with an F10 M5 illuminated gear knob. Really like it, makes the shift a bit stiffer though but I don't mind that.
@BMWarrior1
@BMWarrior1 10 месяцев назад
@@SPANNERRASH there are 2 versions of the shifter, I'm guessing you got the 'shorter version'? I think part # ends in 373
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
@@BMWarrior1 Almost definitely the shortest one, but I did it long time ago so hard to be 100%. I remember it was a 545 one though
@BMWarrior1
@BMWarrior1 10 месяцев назад
@@SPANNERRASH thanks for the reply man, also how did you get the F10 knob to work? im assuming you just removed the leather surround and mated it to the E46 surround?
@SPANNERRASH
@SPANNERRASH 10 месяцев назад
@@BMWarrior1No worries! Yeah I took the plastic frame off the M3's original shift boot surround by removing the staples etc, then swapped it onto the F10 M5 shift boot which is integrated with the knob. So it was a bit more involved than just swapping the shifter but it was worthwhile in the end and I'm super happy with it! I love that I got to retain the illumination.
@nickcook7408
@nickcook7408 4 месяца назад
open filter enclosed in a hot engine bay without a sealed, direct cold air feed?! well done sir, you just paid money for lower air density. please explain why you want less air density in one paragraph or less.
@SPANNERRASH
@SPANNERRASH 4 месяца назад
Interesting take, but the filter is fed a stream of cold air via the brake duct scoop. Otherwise I'd agree that a warm air intake is a bad idea! Eventuri have done quite a bit of R&D to make this an undeniable performance upgrade, check it out.
@Classe1976
@Classe1976 9 месяцев назад
First of all, congratulations for the video. Secondly, I want to ask you what attracted you to the Eventuri compared to the classic CSL filter. Do you find that you had a notable increase in performance as declared or did you have to remap first? The CSL airbox claims 4 hp more and the Eventuri even 12. it seems like a lot. greetings from Italy and thanks!
@SPANNERRASH
@SPANNERRASH 9 месяцев назад
Thanks! A full CSL airbox is multiples more expensive than the Eventuri intake so cost was a factor for sure. I also really like that the Eventuri is effectively a bolt-on upgrade, which requires no remap to work, and can be just as easily bolted-off. 😄 It's an extremely high quality component and its backed by proper R&D so I'm more than happy to have it on my M3. Regarding the result, it makes the car sound amazing. I'm sure that a full CSL airbox sounds even better, but I'm very pleased with the Eventuri's sound. I'm not sure I notice any improvement to power, I likely would if I got the counterpart remap, but sadly I haven't got that. Luckily I didn't buy it to gain any power, just to gain induction roar. 😁 Hope that helps!
@Classe1976
@Classe1976 9 месяцев назад
@@SPANNERRASH 😂👍..I agree, thanks and enjoy!!
Далее
Why Did This BMW M3 Only Cost £5000 !?!?! | 4k
40:43
ЛУЧШАЯ ПОКУПКА ЗА 180 000 РУБЛЕЙ
28:28
FOUND MY DREAM BMW M3 CSL...BUT THE PRICE!?
11:35
Просмотров 216 тыс.
BMW M3 Air Intake Review + Dyno Runs
8:43
Просмотров 6 тыс.
BMW M3 E46-PURE CARBON AIRBOX SOUNDS!
5:39
Просмотров 273 тыс.
УЧИТЕ ПДД
0:23
Просмотров 2,6 млн
Erali 320 ming $ ferari sotib oldi
0:31
Просмотров 1,6 млн